Loading ...
Sorry, an error occurred while loading the content.

Re: [IH CUB LoBoy Numbered Series] 184 midlift question

Expand Messages
  • Mark Everett
    Exactly, the float detent is not a heavy spring loaded thing like you may be used to. Also its a one way lift circuit. Its not as stiff as you may be used to
    Message 1 of 4 , Mar 17, 2011
    View Source
    • 0 Attachment
      Exactly, the float detent is not a heavy spring loaded thing like you may be used to. Also its a one way lift circuit. Its not as stiff as you may be used to in the up direction even in the hold position. It ain't Touch Control.
      Mark

      Mike Sloane <mikesloane@...> wrote:

      >I don't think you will feel the detent, but if the lever stays forward
      >when you move it all the way forward, that's it.
      >
      >Mike
      >
      >On 3/17/2011 1:32 PM, BoyceR wrote:
      >> According to the manual, if you put the lift handle all the way forward,
      >> it is in a float position. I tried that, but did not feel any detent to
      >> indicate it was a floater! So, should there be a detent? Can I simply
      >> put it in that position, cut the tractor off, then hop down and lift the
      >> mower deck to test? Thanks!
      >>
      >> Boyce
      >>
    Your message has been successfully submitted and would be delivered to recipients shortly.