Loading ...
Sorry, an error occurred while loading the content.

5069Re: manual / diagram needed for 60" deck/ pulley removal

Expand Messages
  • Phil C.
    Apr 2, 2004
      --- In ihcubloboyseries@yahoogroups.com, "y_what4" <j_sauser@c...>
      wrote:
      > Thanks Steve,
      > Yes, I too am painfully aware of how fragile these cast pulleys
      > are.....
      > Just to make sure I understand, the middle pully removal is
      > identical to the side ones..... Remove the pully bolts and press
      > the pully downward, this should leave the pinch collar (I don't
      know
      > what it's really called) to loosen and be removed.
      >
      > How would you remove the entire bearing mount? The best I can
      tell,
      > the only way this can be done is to remove the pulley.....
      >
      >
      > --- In ihcubloboyseries@yahoogroups.com, sjfoss2002
      <no_reply@y...>
      > wrote:
      > > Jerry,
      > >
      > > Well, I don't have a manual, but I have something almost as
      > good ....
      > > experience!
      > >
      > > I took my deck apart to paint it (winter, 2002) and ran into the
      > same
      > > problem - the middle pulley was stuck. I (stupidly) used two
      > levers
      > > to try to pry it off. It's a tapered shaft like the other two
      > > pulleys. It came off, alright. I also broke a piece off the
      bottom
      > of
      > > the pulley. I JBwelded it back in place and it's worked ever
      > since. I
      > > would suggest taking the whole unit (the bearing mount with the
      > > pulley) to a machine shop and have them pull it off.
      > >
      > > My two cents,
      > >
      > > Steve
      > >
      > >
      > > --- In ihcubloboyseries@yahoogroups.com, "y_what4"
      <j_sauser@c...>
      > > wrote:
      > > > I found the manual from Binder books, should have checked the
      > links
      > > > first, I'm a newby to the loboys. In the meantime, I'm still
      > > looking
      > > > for answers on the pulley removal. The grass is growing here
      in
      > > > Texas!
      > > > Thanks,
      > > > Jerry
      > > >
      > > >
      > > > --- In ihcubloboyseries@yahoogroups.com, "y_what4"
      > <j_sauser@c...>
      > > > wrote:
      > > > > I have what I believe to be a 3160u-1111 deck on my loboy.
      > > > > Anyone have a manual or parts diagram for this deck?
      > > > > I'm in the process of putting new bearings in and I can't
      seem
      > to
      > > > > get the tripple pulley (the one in the middle) off of the
      > shaft.
      > > > > I'm not sure exactly how they are on the shaft. Do I pull
      up?
      > or
      > > > > push down?
      > > > > Thanks,
      > > > > Jerry

      Check files here @ left. I added 3160 maintenance pages from manual
      to view. The local IH dealer here (mid ohio)has just about
      everything to rebuild.
    • Show all 8 messages in this topic