Loading ...
Sorry, an error occurred while loading the content.

Messages List

7205

Re: Hayward Swim Pure plus controller failed

High Paul, I suppose that I need to eat a serving of Crow :-) All that said, still using my 64 sq-ft DE filter that is over 30 years old now. After going to
pentode7591
Jun 18
#7205
 
7204

Re: Hayward Swim Pure plus controller failed

Most people just replace this board. It usually presents with the symptom message pcb. 95% of my service calls on this unit are for this exact problem. When it
Paul Meza
Jun 18
#7204
 
7203

Hayward Swim Pure plus controller failed

After about 7 years, my Hayward controller went dark. By Dark, I mean that none of the LED's or display would come on. It had been broken long enough for an
pentode7591
Jun 18
#7203
 
7202

Re: Pool cleaner problem

the impeller casing is known to crack in cold weather. its not hard to take off or replace. john b s/v 1983 catalina 27 On Wednesday, June 14, 2017 9:40 AM,
john Belanger
Jun 14
#7202
 
7201

Re: Pool cleaner problem

Well, it would seem you were correct. I didn't suspect air, since I saw no bubbles coming up from the fitting, but when I removed it from the wall there was a
Harry Boswell
Jun 14
#7201
 
7200

Re: Pool cleaner problem

your impeller could also be stripped. the booster pump may be running but the impeller is not turning. also look for a crack in the impeller housing letting in
jhnblngr
Jun 13
#7200
 
7199

Re: Pool cleaner problem

hissing would suggest air not water in the line. do you have water coming out of the wall? if not then air has replaced water. once the residual water has
john Belanger
Jun 13
#7199
 
7198

Pool cleaner problem

My Pentair/Letro Legend has stopped doing its job. The booster pump seems to be running OK, but the Legend rolls around the pool for a little while and then
Harry Boswell
Jun 13
#7198
 
7197

Green Hair from Copper Ions/Algaecide

I swim 5 hours per week. During the summer I use my home pool which has a copper/silver/zinc ion system. The copper ion level is 0.3 to 0.4 ppm. The cool
wb4eel
May 1
#7197
 
7196

Re: Opinions on pump reliability?

What is the stated hp of the the motor your putting in? How are you wiring it to the clock. One thing I would look for is that the true hp and the impeller are
aquatechpoolservice
Mar 3
#7196
 
7195

Re: Opinions on pump reliability?

Yes, I do think I've wired them correctly- I double check that the voltage is correct at the motor terminals for the high speed and the low speed settings. (
Rjricardy
Mar 3
#7195
 
7194

Re: Opinions on pump reliability?

Sure you are wiring them correctly? How are you working this two speed motor? How is it keeping time? Intermatic timer? Automation??? Incorrect ( but
aquatechpoolservice
Mar 1
#7194
 
7193

Re: Opinions on pump reliability?

Randy, If the 2 speed motor is a repacement for a single speed motor, does the original motor HP and RPM match the 2 speed motor when on high speed? What about
pentode7591
Mar 1
#7193
 
7192

Re: Opinions on pump reliability?

Greetings, Yes, this board has been rather quiet lately. You did bring up 2 speed pumps, and I've had a problem where I've literally melted down several 2
Rjricardy
Mar 1
#7192
 
7191

Re: Opinions on pump reliability?

Lol. You too Jim. I remember. I rarely see much action on here and fet strongly about that question it was an easy one to answer. Just finished an Intelliflo
aquatechpoolservice
Feb 28
#7191
 
View First Topic Go to View Last Topic