Re: [Electronica] Simple Phone Tap
- Thanks a Bunch Jack Emery----- Original Message -----From: Nicolae SfetcuTo: Y: ElectronicsSent: Thursday, August 01, 2002 4:06 PMSubject: [Electronica] Simple Phone Tap
Simple Phone Tap
This circuit is extremely simple, therefore there is less chance of any problems. It can be placed anywhere on the phone line and it will record any conversation on any phone on that line.Schematic
Part Total Qty. Description Substitutions R1 1 470 Ohm 1/4 Watt Resistor R2 1 1K 1/4 Watt Resistor R3 1 100K 1/4 Watt Resistor R4 1 6K 1/4 Watt Resistor C1, C2 2 0.01 uF 100V Ceramic Capacitor K1 1 24VDC Reed Relay MISC 1 Wire, Headphone Plugs, Phone Plug Or Alligator Clips
1. To use the circuit, simply connect it in series to the phone. Then plug in the recorder. It will start recording when the phone is picked up.
2. The values of R1 and R2 may have to be adjusted, depending on the characteristics of the phone line it is connected to (they vary). If the R1+R2 combination is increased sufficiently (try 2.47K) then the circuit can be connected in parallel with the line, thus covering all attached devices.
The Engineering Site: http://alfaie.virtualave.net
Teleactivities Organizations: http://www.teleactivities.org
Teleactivities Network: http://www.teleactivities.net/resources
Teleactivities Services: http://www.teleactivities.com
To unsubscribe from this group, send an email to:
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.