Re: [hobbicast] scrap vs ingots
> Forget about melting beer cans etc thats a bloody waste of time , meltActually, your last line may be the key. Thin sheets have a lot of surface
> something with a bit of guts in it!
> Col Croucher
area per unit weight. Oxides form on the surface, and become dross.
Commercial recyclers bale or briquette UBC's (used beverage cans) before
melting them. You get less dross if you flatten them first, then fold them
over and beat them into a lump with a hammer. Big chunks are better in
that they form less dross. You can also form a small pool of molten
aluminum, and drop cans in one at a time. They will melt quickly enough to
form very little dross. The problem is that there isn't much metal in a UBC
to start with. Figure about 60 cans per pound. Dan P.
- But the point is, it could be anyone who produces scrap. that
mechanic who lives at the end of the block may be a source of pistons
--- In email@example.com, Brian Whatcott <betwys@D...> wrote:
> Bike graveyards are rare enough, maybe I can guess
> at your location. Garland, Texas?
> There's a graveyard there...
> Brian W
> At 12:16 PM 12/6/02, you wrote:
> >I guy with a motorcycle junkyard lives two blocks down from me. He
> >drops off old fork tubes, pistons, all sorts of crap. About 1/2 of
> >which I can use for casting and I throw the rest. but I'm not about
> >to tell him to stop. Every once in awhile, he'll get a cast ashtray
> >or plaque on his doorstep in trade.
> >--- In hobbicast@y..., "arclight762" <arclight@2...> wrote:
> > > I get mixed results. Some places have given me free material,
> > > have wanted money, some have said they simply throw it away, and
> > > others have said they have it but won't give it to me
> > > recycle." Apparently, the scrap guys that come by are very
> > > territorial and give them all sorts of hell if they give away
> > > scrap to someone else. Fun stuff.
> > >
> > > John N.
> Brian Whatcott
> Altus OK Eureka!