Loading ...
Sorry, an error occurred while loading the content.

28737Re: pattern making

Expand Messages
  • cvedrick
    Oct 1, 2003
      Velspar, polyurethane based "gloss spar varnish" makes a nice, shiny
      and smooth and very durable finish. It can be sanded, steel wooled
      or rubbed lightly with paint thinner for a glass smooth finish, but
      that is not usually necessary.

      --- In hobbicast@yahoogroups.com, integerspin <richard@i...> wrote:
      > hi
      > I subscribed to this group for a while about six months ago.
      > I didn't in fact do the castings I needed my self, I had a small
      > foundry do them.
      > I made an mdf pattern and have had about 20 of these items done so
      > I am just altering the pattern prior to haveing another ten cast.
      > Becuse i made the pattern without any undercut's I have to machine
      > a lot off the casting, so I am removing what I can from the
      > quicker to remove it onces than ten times?
      > I wondered what people paint patterns with, I was talking to
      someone at a
      > landrover show and he said they use a 2pack floor paint on their
      > brushed on it flows out like glass and is quite hard.. I didn't ask
      > paint or where I get it though..
      > I did look in 'Bodge it and Quick' they have a few types of paint
      > sound promising, but i cant spend a tenner a can on a few types of
      paint in
      > the
      > hope it is ok...
      > any ideas..
      > --
      > thanks richard
    • Show all 6 messages in this topic