Re: Where does your hammock fail?
- --- In email@example.com, "docteric" <docteric@y...>
> I've been doing a few experiements with different knots to tie thewas
> hanging lines to the hammock fabric. I've been using weak fabric to
> to see which knots rip the fabric more.
> An interesting finding was that whenever the hammock failed - it
> always just below the knot. What have other people's experiencesI have been using three half-hitches as a constrictor knot to attach
> been? I'm wondering if that is the weak spot, maybe we could
> reinforce it with a double layer (like the stress points on a tarp)
> and then use a lighter fabric (like 1.1).
> What do you folks with more experience than me (that means almost
> all of you) think?
rope to my hammocks for about 1.5 years and have not noticed any
failure. I used 0.25" hollow braid polypropylene rope attached to a
two-layer hammock of two pieces of 1.1 oz rip-stop nylon for most of
that time. (As a side note about durability and what worked and what
didn't; I used #16 snap fasteners reinforced with 1" squares of
Bondex pressure sensitive nylon to attach the two edges of the 1.1 oz
rip-stop nylon and never had a failure with that either. I used 6
equally spaced snaps on each side and I used red squares on one side
of the hammock and blue squares on the other side to easily identify
what was what. I was pleased with how this scheme worked.)
I would suspect that the kind of rope that you use would also effect
failures. Smaller diameter rope with abrasive surface would figure
to do the most damage. Attachment knots that slip or slide would
also figure to contribute to fabric failure.
Since I have not noticed any failure or heard of others experiencing
failures, I am not to worried about the fabric at this point. I do,
however, keep my eye on the rope I use because I am concerned about
its long term durability. However, don't get me wrong, I am glad to
see someone working on that issue and am interested in whatever you