[Hammock Camping] Re:Is 1 stud enough?
- You are right. I thought about that too. I did use the same size
eye-bolt for the top and bottom but I drilled good sized pilot holes
for both. Now I realize that the top bolt can be pretty wimpy because
it's only purpose is to stabilize the 2x4 and that mostly when putting
up the beam.I have slept in the hammock 3 nights and it is VERY
stable. Remember that the actual hammock hanging eyes are on the
bottom of the 2x4.
--- In firstname.lastname@example.org, amendment2@... wrote:
> The biggest problem I see with that is the potential for two
eyebolts 3 1/2 to 4 inches apart to split the stud. You definitely
want to drill a pilot hole and you want the hole centered on the
studs. Good luck! Tell us how.it works out.
- --- In email@example.com, "Neal" <nealaustin@...> wrote:
>I used a metal pole hanging on window frames before. I used some
> I've been out in the hammock quite a bit and want to hang a hammock in
> a room in my house. I have a typical American house with 2x4 studs
> that are 16" apart under gypsum board. My question is: If I screw a
> eye-bolt with into a stud in each of the walls would it hold? Would
> the horozontal pull possibly damage the walls. The walls are 9 feet
> apart and non-load bearing. Would I need to structure the load over 2
> studs? I weigh 200 lbs
clothing to stablize the pole from rolling on the frames. My hammock
was tied to the pole.
Currently I am using a stand that looks like this but cost me $19 from
It works fine, just takes up a lot of space in terms of length.