Do you have the pskreporter on. I have noticed when you run it from dm780 it can hurt performance with symptoms you describe
--- In firstname.lastname@example.org, Jerry <jerseyj@...> wrote:
> Hi all,
> I've been noticing some issues since I updated to this build. My
> setup is a PC running Windows 7 64 bit. 4GB of memory, lot's of hard
> drive and cpu (according to DM780 cpu never gets above 15% ussage). I
> am using the latest release of HRD/Logbook/DM780. Rig is an Icom
> IC-7000 utilizing a SignaLink USB going out to a remote MFJ-972 tuner
> and a 43 foot vertical with balun.
> I have 2 symptoms showing up, one is related to "freezing" and one is
> related to output power.
> From time to time (I'll describe the circumstances below) I find that
> DM780 freezes for 5-10 seconds. About 80% of the time, in conjunction
> with that, power output shrinks to near zero and I have to turn the
> Signalink on and off to get back to normal.
> The Signalink shows no symptoms of this power drop at any other time
> with any other software.
> These symptoms happen most often when I'm switching from the
> Superbrowser window to my BPSK31 window. Much less often it happens
> when I switch in the other direction from the BPSK31 to Superbrowser
> Occasionally, while in the BPSK31 tab of DM780 it will freeze while
> I'm in mid-transmission.
> I used the previous build with none of this happening. Any clues ?
> Anyone else noticing this ?
> "Those who would give up essential liberty to purchase a little
> temporary safety, deserve neither liberty nor safety." - Ben Franklin
> It's also true that those who would give up privacy for security are
> likely to end up with neither.
> It's not the years in your life that count, but the life in your years"
> "Change is Inevitable, Growth is Optional"
> "Without continual growth and progress, such words as improvement,
> achievement and success have no meaning." - Benjamin Franklin