Loading ...
Sorry, an error occurred while loading the content.

Re: [gnubies-il] VMware

Expand Messages
  • Matan Schatzman
    i dont think that vmware bios is recognized with my hd and its 2 normal hd. i edit configuration editor and putted the mounted devices as /dev/hda1 plain hd
    Message 1 of 3 , Aug 4, 2002
    • 0 Attachment
      i dont think that vmware bios is recognized with my hd and its 2 normal hd.
      i edit configuration editor and putted the mounted devices as
      /dev/hda1 plain hd
      and the second
      /dev/hdc1 plain hd
      and it doesnt work.
      what is the problem?
      ----- Original Message -----
      From: Amir Tal <tal@...>
      To: <gnubies-il@yahoogroups.com>
      Sent: Monday, August 05, 2002 10:56 AM
      Subject: Re: [gnubies-il] VMware


      > On Sunday 04 August 2002 01:18, Matan Schatzman wrote:
      >
      > what is the problem ?
      > you can define those block devices in the configuration editor, but cannot
      use
      > them , or cant even access them ?
      > go to the config editor in vmware, and add those devices. make sure you
      have
      > rw permitions for them, and make sure vmware recognizes then when booting
      (in
      > the vmware BIOS)
      >
      > if you are talking about using RAW disk, that a whole different story.
      > the disk has to be active (bootable), and you should choose it as a real
      > device and not a virtual disk.
      >
      > tal.
      >
      >
      > > I mounted my hd. 1 in hda1 and the second in hdc1 both are working and
      can
      > > be used by everything except VMware. how can i fix Vmware so it will the
      > > hd's and will boot into them?
      > >
      > >
      > > To unsubscribe from this group, send an email to:
      > > gnubies-il-unsubscribe@egroups.com
      > >
      > >
      > >
      > > Your use of Yahoo! Groups is subject to
      http://docs.yahoo.com/info/terms/
      >
      >
      > To unsubscribe from this group, send an email to:
      > gnubies-il-unsubscribe@egroups.com
      >
      >
      >
      > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
      >
      >
    • Amir Tal
      On Sunday 04 August 2002 01:18, Matan Schatzman wrote: what is the problem ? you can define those block devices in the configuration editor, but cannot use
      Message 2 of 3 , Aug 5, 2002
      • 0 Attachment
        On Sunday 04 August 2002 01:18, Matan Schatzman wrote:

        what is the problem ?
        you can define those block devices in the configuration editor, but cannot use
        them , or cant even access them ?
        go to the config editor in vmware, and add those devices. make sure you have
        rw permitions for them, and make sure vmware recognizes then when booting (in
        the vmware BIOS)

        if you are talking about using RAW disk, that a whole different story.
        the disk has to be active (bootable), and you should choose it as a real
        device and not a virtual disk.

        tal.


        > I mounted my hd. 1 in hda1 and the second in hdc1 both are working and can
        > be used by everything except VMware. how can i fix Vmware so it will the
        > hd's and will boot into them?
        >
        >
        > To unsubscribe from this group, send an email to:
        > gnubies-il-unsubscribe@egroups.com
        >
        >
        >
        > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
      Your message has been successfully submitted and would be delivered to recipients shortly.