Loading ...
Sorry, an error occurred while loading the content.

RE: [Genealogy Research Club] Family Tree Maker

Expand Messages
  • Clark & Rita Pederson
    Sharon: With your family group sheet report showing on the screen, click on the top menu: Contents, then Items to include in Family Group sheet, select
    Message 1 of 13 , Sep 14, 2007
    • 0 Attachment
      Sharon:

      With your family group sheet report showing on the screen, click on the top
      menu: Contents, then Items to include in Family Group sheet, select
      Standard page options from the left list of available items, then hit the >
      arrow. With standard page highlighted on the right side, select the
      options button and make sure there is a checkmark in the pictures/object
      box. When it opens select By category, then Any. Then if you have a
      picture in the Marriage Photo Album (even if it is a family picture instead
      of a wedding picture) it will show on the top of your family group sheet
      and the individual preferred photo will appear next to each individual name
      where you have a photo saved in their scrapbook. Enjoy your pictures on
      your reports!



      Clark

      Oregon



      _____

      From: genealogyresearchclub@yahoogroups.com
      [mailto:genealogyresearchclub@yahoogroups.com] On Behalf Of sstokesbary
      Sent: Friday, September 14, 2007 1:38 PM
      Subject: [Genealogy Research Club] Family Tree Maker

      I have Family Tree Maker, version 16 and I "think" I'm suppose to be
      able to incorporate the pictures with the genealogy. I know how to get
      the pictures into the scrapbook, but when I print off the genealogy
      report, there are no pictures.
      Sharon





      [Non-text portions of this message have been removed]
    • Dianne Planeta
      I have used FTM since it was a share ware product. I have tried various other programs and did not care for them. The upgrades fit seamlessly over the older
      Message 2 of 13 , Sep 15, 2007
      • 0 Attachment
        I have used FTM since it was a "share ware" product. I
        have tried various other programs and did not care for
        them. The upgrades fit seamlessly over the older versions.



        ____________________________________________________________________________________
        Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
        http://answers.yahoo.com/dir/?link=list&sid=396545469
      • Sharon
        Thank you, thank you. I m going to print off your instructions and work on them as soon as I can. I am so excited!! What a thrill this will be. Thank you
        Message 3 of 13 , Sep 17, 2007
        • 0 Attachment
          Thank you, thank you. I'm going to print off your instructions and work on them as soon as I can. I am so excited!! What a thrill this will be. Thank you again.
          Sharon


          ----- Original Message -----
          From: Clark & Rita Pederson
          To: genealogyresearchclub@yahoogroups.com
          Sent: Friday, September 14, 2007 7:46 PM
          Subject: RE: [Genealogy Research Club] Family Tree Maker


          Sharon:

          With your family group sheet report showing on the screen, click on the top
          menu: Contents, then Items to include in Family Group sheet, select
          Standard page options from the left list of available items, then hit the >
          arrow. With standard page highlighted on the right side, select the
          options button and make sure there is a checkmark in the pictures/object
          box. When it opens select By category, then Any. Then if you have a
          picture in the Marriage Photo Album (even if it is a family picture instead
          of a wedding picture) it will show on the top of your family group sheet
          and the individual preferred photo will appear next to each individual name
          where you have a photo saved in their scrapbook. Enjoy your pictures on
          your reports!

          Clark

          Oregon

          _____

          From: genealogyresearchclub@yahoogroups.com
          [mailto:genealogyresearchclub@yahoogroups.com] On Behalf Of sstokesbary
          Sent: Friday, September 14, 2007 1:38 PM
          Subject: [Genealogy Research Club] Family Tree Maker

          I have Family Tree Maker, version 16 and I "think" I'm suppose to be
          able to incorporate the pictures with the genealogy. I know how to get
          the pictures into the scrapbook, but when I print off the genealogy
          report, there are no pictures.
          Sharon

          [Non-text portions of this message have been removed]





          [Non-text portions of this message have been removed]
        • Helen
          If you use Family Tree Maker would you please answer a couple of question for me? Can you make more than one Family Tree on the same program? I want to start
          Message 4 of 13 , May 21, 2009
          • 0 Attachment
            If you use Family Tree Maker would you please answer a couple of question for me? Can you make more than one Family Tree on the same program?

            I want to start a tree of my husband's family separate from my family. I had some problems with my application a while back and thought I had lost all of my data, so I am fearful of doing anything very adventurous.

            Thanks to anyone that answers.
          • Clark
            Helen: Yes you can have more than one family tree with your Family Tree Maker program. Give it a different name. The exact process varies by which version
            Message 5 of 13 , May 22, 2009
            • 0 Attachment
              Helen: Yes you can have more than one family tree with your Family Tree
              Maker program. Give it a different name. The exact process varies by which
              version you have. When you go to open FTM it will usually open with the
              last tree you had open. Go to file on your menu bar to change to the other
              tree. If your current tree has both lines in it, before you start deleting
              one line be sure to save a back up copy of the whole tree under another name
              and then reopen the old one before you do any deleting. You don't want to
              have a mistake and lose your data! Good Luck.

              Clark

              _____

              From: genealogyresearchclub@yahoogroups.com
              [mailto:genealogyresearchclub@yahoogroups.com] On Behalf Of Helen
              Sent: Thursday, May 21, 2009 8:12 PM
              To: genealogyresearchclub@yahoogroups.com
              Subject: [Genealogy Research Club] Family Tree Maker

              If you use Family Tree Maker would you please answer a couple of question
              for me? Can you make more than one Family Tree on the same program?

              Thanks to anyone that answers.





              [Non-text portions of this message have been removed]
            • Kat kief1255
              In answer to your question, yes you can make several family trees using the same program. Just name them differently. You can also import certain individuals
              Message 6 of 13 , May 22, 2009
              • 0 Attachment
                In answer to your question, yes you can make several family trees using the same program. Just name them differently. You can also import certain individuals that you may have the pertains to your new family tree from an existing file using the merge/append feature.











                To: genealogyresearchclub@yahoogroups.com
                From: has_hotflashes2003@...
                Date: Fri, 22 May 2009 03:11:56 +0000
                Subject: [Genealogy Research Club] Family Tree Maker







                If you use Family Tree Maker would you please answer a couple of question for me? Can you make more than one Family Tree on the same program?

                I want to start a tree of my husband's family separate from my family. I had some problems with my application a while back and thought I had lost all of my data, so I am fearful of doing anything very adventurous.

                Thanks to anyone that answers.









                _________________________________________________________________
                Windows Live´┐Ż: Keep your life in sync.
                http://windowslive.com/explore?ocid=TXT_TAGLM_BR_life_in_synch_052009

                [Non-text portions of this message have been removed]
              • Forrest Plumstead
                ... In the 2009 version it opens up to a tab called Current Tree. To the left is a tab called New Tree. Click on that one and start a new file. -- Forrest
                Message 7 of 13 , May 22, 2009
                • 0 Attachment
                  On Fri, May 22, 2009 at 8:07 AM, Clark <pedj@...> wrote:

                  >
                  >
                  >
                  >
                  > Helen: Yes you can have more than one family tree with your Family Tree
                  > Maker program. Give it a different name. The exact process varies by which
                  > version you have. When you go to open FTM it will usually open with the
                  > last tree you had open. Go to file on your menu bar to change to the other
                  > tree. If your current tree has both lines in it, before you start deleting
                  > one line be sure to save a back up copy of the whole tree under another
                  > name
                  > and then reopen the old one before you do any deleting. You don't want to
                  > have a mistake and lose your data! Good Luck.
                  >
                  > Clark
                  >
                  > _____
                  >
                  > From: genealogyresearchclub@yahoogroups.com<genealogyresearchclub%40yahoogroups.com>
                  > [mailto:genealogyresearchclub@yahoogroups.com<genealogyresearchclub%40yahoogroups.com>]
                  > On Behalf Of Helen
                  > Sent: Thursday, May 21, 2009 8:12 PM
                  > To: genealogyresearchclub@yahoogroups.com<genealogyresearchclub%40yahoogroups.com>
                  > Subject: [Genealogy Research Club] Family Tree Maker
                  >
                  >
                  > If you use Family Tree Maker would you please answer a couple of question
                  > for me? Can you make more than one Family Tree on the same program?
                  >
                  > Thanks to anyone that answers.
                  >
                  > [Non-text portions of this message have been removed]
                  >
                  >
                  >

                  In the 2009 version it opens up to a tab called Current Tree. To the left is
                  a tab called New Tree. Click on that one and start a new file.

                  --
                  Forrest Plumstead fplum1@...
                  PLUMSTEAD-L List master
                  http://lists.rootsweb.com/index/surname/p/plumstead.html
                  Plumstead and Associated Families:
                  http://freepages.genealogy.rootsweb.com/~fplum/
                  Military Kool Lynx: http://geocities.com/fplum/
                  Ham Radio WB5HQO http://forrest.3h.com/main.html
                  Photos: http://myspace.com/fplum7755


                  [Non-text portions of this message have been removed]
                • Carolynn Brehmer
                  Which version are you using? 2006, 2008 or 2009? I like 2006 the best. ... From: Helen Subject: [Genealogy Research Club] Family
                  Message 8 of 13 , May 22, 2009
                  • 0 Attachment
                    Which version are you using? 2006, 2008 or 2009? I like 2006 the best.

                    --- On Thu, 5/21/09, Helen <has_hotflashes2003@...> wrote:


                    From: Helen <has_hotflashes2003@...>
                    Subject: [Genealogy Research Club] Family Tree Maker
                    To: genealogyresearchclub@yahoogroups.com
                    Date: Thursday, May 21, 2009, 11:11 PM








                    If you use Family Tree Maker would you please answer a couple of question for me? Can you make more than one Family Tree on the same program?

                    I want to start a tree of my husband's family separate from my family. I had some problems with my application a while back and thought I had lost all of my data, so I am fearful of doing anything very adventurous.

                    Thanks to anyone that answers.



















                    [Non-text portions of this message have been removed]
                  • littledi1030
                    You aure can! Just go up to File and open a new tree. I have four different ones going. One is just for info that I do not yet have sources yet to prove a
                    Message 9 of 13 , May 22, 2009
                    • 0 Attachment
                      You aure can! Just go up to "File" and open a new tree. I have four different ones going. One is just for info that I do not yet have sources yet to prove a fact. Once I get the info I delete the individual and put the info in the real tree.

                      --- In genealogyresearchclub@yahoogroups.com, "Helen" <has_hotflashes2003@...> wrote:
                      >
                      > If you use Family Tree Maker would you please answer a couple of question for me? Can you make more than one Family Tree on the same program?
                      >
                      > I want to start a tree of my husband's family separate from my family. I had some problems with my application a while back and thought I had lost all of my data, so I am fearful of doing anything very adventurous.
                      >
                      > Thanks to anyone that answers.
                      >
                    • jamesr23@juno.com
                      You do not say what version that you use but if it is 2005 go to file after you open it to the current program in use. at file is adrop down box, click close.
                      Message 10 of 13 , May 22, 2009
                      • 0 Attachment
                        You do not say what version that you use but if it is 2005 go to file after you open it to the current program in use. at file is adrop down box, click close. go back to file and click new. a new tree area will open up and then you can fill in the information you want. you can accesss either tree by oepning or closing in the same manner. If you use 2009 it open a little differently. I just bought it and I love it but don't know it as well as I do 2005.
                        Ann

                        ____________________________________________________________
                        Compete with the big boys. Click here to find products to benefit your business.
                        http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTI97yzun9nOjVxTMM9TNxN8tQQqUn5YwrLwUttiwX78S21YWLxD6A/
                      • Jean
                        If you have the FTM 2009, click on PLAN then just click on the New Tree tab below and just start filling in the blanks with what you know. We (my husband
                        Message 11 of 13 , May 22, 2009
                        • 0 Attachment
                          If you have the FTM 2009, click on "PLAN" then just click on the "New Tree" tab below and just start filling in the blanks with what you know. We (my husband and I) have about 12 different trees currently going in FTM, along with a single tree that contains everything to date.
                          I've separated the lines from our grandparents so that if we do get a connection, all we have to do is send the information specific to that line, rather than going to my "everything in one" tree as they usually do not want the extra branches that we have in there. Only what pertains to that particular line. <shrug> We've sent the entire tree to a few people who have requested it and they e-mail me back requesting that we only send the information on the 1 particular line so we figured that it would be easier to break them down at Grandparents level then just add the branch that ends with us, with a note attached saying that if they want/need the branches attached from us to our grandparents, then just need to ask, as most of our parents and their siblings, nieces and nephews are alive.

                          Jean

                          PS: Hope this helps and isn't too much rambling.
                          --- In genealogyresearchclub@yahoogroups.com, "Clark" <pedj@...> wrote:
                          >
                          >
                          >
                          > Helen: Yes you can have more than one family tree with your Family Tree
                          > Maker program. Give it a different name. The exact process varies by which
                          > version you have. When you go to open FTM it will usually open with the
                          > last tree you had open. Go to file on your menu bar to change to the other
                          > tree. If your current tree has both lines in it, before you start deleting
                          > one line be sure to save a back up copy of the whole tree under another name
                          > and then reopen the old one before you do any deleting. You don't want to
                          > have a mistake and lose your data! Good Luck.
                          >
                          > Clark
                          >
                          > _____
                          >
                          > From: genealogyresearchclub@yahoogroups.com
                          > [mailto:genealogyresearchclub@yahoogroups.com] On Behalf Of Helen
                          > Sent: Thursday, May 21, 2009 8:12 PM
                          > To: genealogyresearchclub@yahoogroups.com
                          > Subject: [Genealogy Research Club] Family Tree Maker
                          >
                          > If you use Family Tree Maker would you please answer a couple of question
                          > for me? Can you make more than one Family Tree on the same program?
                          >
                          > Thanks to anyone that answers.
                          >
                          >
                          >
                          >
                          >
                          > [Non-text portions of this message have been removed]
                          >
                        Your message has been successfully submitted and would be delivered to recipients shortly.