Loading ...
Sorry, an error occurred while loading the content.

Re: DOS FanilySearch on a Network with a Windows XP Operating System

Expand Messages
  • landlord_dave
    ... a Windows XP Operating System? If so, could you please tell me the procedure you used? ... Try http://fhctech.org/fhc/applications/fs.htm I think you may
    Message 1 of 10 , Feb 10, 2009
    • 0 Attachment
      --- In fhctech@yahoogroups.com, "Fred Miesterfeld" <formiest@...>
      wrote:
      >
      > Has anyone installed the old with DOS FanilySearch on a Network with
      a Windows XP Operating System? If so, could you please tell me the
      procedure you used?
      >
      >
      >
      > Fred Miesterfeld
      >

      Try http://fhctech.org/fhc/applications/fs.htm
      I think you may get all you need at that site.

      Sincerely,
      Dave Cottrell
      FHC Director Poole England Stake
    • landlord_dave
      ... a Windows XP Operating System? If so, could you please tell me the procedure you used? ... You could also read the following to get the FS 2.27 install to
      Message 2 of 10 , Feb 10, 2009
      • 0 Attachment
        --- In fhctech@yahoogroups.com, "Fred Miesterfeld" <formiest@...>
        wrote:
        >
        > Has anyone installed the old with DOS FanilySearch on a Network with
        a Windows XP Operating System? If so, could you please tell me the
        procedure you used?
        >
        >
        >
        > Fred Miesterfeld
        >
        You could also read the following to get the FS 2.27 install to work
        on Win XP:-


        The current policy is to have family history centers install Windows
        2000 SP4 on computers that will run FamilySearch 2.27 for DOS.



        There is still an issue with FamilySearch 2.27 ceasing to work when
        installed on Windows XP and when you use the resource CDs (instead of
        a network setup). Each time you insert a CD in a computer running
        Windows XP, it asks what you would like to do with that CD. This
        causes the FamilySearch 2.27 program to crash.



        FamilySearch 2.27 (DOS) install instructions for Windows XP:

        Log in as an administrator.
        Put the FamilySearch 2.27 Installation CD in your CD drive.
        The program will start installing automatically. At some point during
        this process, you will receive this message: "Cannot determine
        operating system." Click OK to cancel the installation.
        Create a new shortcut on the desktop by right-clicking on a blank area
        of the desktop. Then select New, and then Shortcut.
        Click the Browse button.
        Click the plus sign (+) next to My Computer, and then find and
        highlight the C:\Windows\system32\command.com file.
        Click OK. Click Next.
        For the name of the shortcut, enter MS-DOS Prompt. Then click Next.
        Click Finish. This will create an MS-DOS icon on your desktop called
        MS-DOS Prompt.
        Right-click this MS-DOS Prompt icon, and then click Properties.
        Click the Memory tab.
        Under the Expanded (EMS) memory area, select 4096.



        Click the Screen tab.
        Select Full-screen by clicking the circle next to it.




        Click Apply.
        Next, click the Program tab.
        In the Cmd line: box, type D:\install.exe (or replace the D with the
        correct letter for your CD drive).
        Click Apply, and then click OK.
        With the FamilySearch 2.27 CD in the CD drive, double-click the MS-DOS
        Prompt icon.
        Install the FamilySearch program according to the instructions on the
        screen.
        Create a shortcut for the FamilySearch DOS program by right-clicking
        on a blank area of the desktop. Then select New, and then Shortcut.
        Click the Browse button.
        Click the plus sign (+) next to My Computer, and then find and
        highlight the C:\PAS\PAS.exe file.
        Click OK. Then click Next.
        For the name of the shortcut, enter FamilySearch. Then click Next.
        Click Finish. This will create an MS-DOS icon on your desktop called
        FamilySearch.
        Right-click the FamilySearch icon, and click Properties.
        Click the Program tab.
        In the lower-right corner, click the Change Icon… button.
        Click the Browse… button.
        Find and select the C:\PAS\Fs.ico file.
        Click Open.
        To save the icon setting, click OK.
        Click the Memory tab.
        In the Expanded (EMS) memory area, select 10240.



        Click the Screen tab.
        Select Full-screen by clicking the circle next to it.
        Click the Misc tab.
        Remove the check mark next to Allow Screen Saver.
        In the Idle sensitivity box, move the slider bar all the way to the
        left.
        In the Windows shortcut keys area, remove the check mark next to
        Alt+Enter.



        Click Apply, and then click OK.
        Open My Computer, and then double-click the C: drive.
        Double-click the PAS folder.
        Double-click the Pasetup.txt file.
        Find the line DRIVED=CD-ROM (Caddy/Cartridge).
        Note: The line could read differently, depending on the letter of the
        CD-ROM drive and the type, such as DRIVEE=CD-ROM (Drawer/Tray).
        Change the last part to read CD-ROM (Generic).
        Note: This line is case sensitive.
        Click File, click Save, and close the window.
        Double-click the Pas.ini file.
        Find the line D=CD-ROM (Caddy/Cartridge).
        Note: The line could read differently, depending on the letter of the
        CD-ROM drive and the type, such as DRIVEE=CD-ROM (Drawer/Tray).
        Change the last part to read CD-ROM (Generic).
        Note: This line is case sensitive.
        Click File, click Save, and close the window.
        Drag the MS-DOS Prompt icon that was created in step 9 into the
        Recycle Bin, and empty the Recycle Bin.
        Note: As you run the program, you may get a pop-up window every time
        you insert a CD that asks what you want to do with it. This is a
        function of Windows XP. Please refer to the Windows help files for
        information on how to correct this.


        Regards
        Dave Cottrell
        FHC Director, Poole England Stake.
      • gtempleman1@comcast.net
        But Russell s suggestion to either copy a working PAS folder or using the modified disk for XP installation is a LOT easier than all the steps below. Fred
        Message 3 of 10 , Feb 10, 2009
        • 0 Attachment

          But Russell's suggestion to either copy a working PAS folder or using the modified disk for XP installation is a LOT easier than all the steps below.

           

          Fred specifically asked about installing in a network environment so the issue about constantly requesting what to do with the CD is moot. Unless you have a motherboard that does not support EMS memory, getting FS to *run* on XP is not difficult once it is installed.

           

          However, there are a few pre-conditions that need to be met.

          1. The data files need to be on the server in the proper folder format.

          2. The client machines need to have drive maps to those folders BEFORE running the FS install or the configuration files do not get created properly (unless one is copying the PAS folder and matching the mapping). If you do this and choose the proper network install settings then there is no need to manually edit Pasetup.txt, Pas.ini.

          3. The server should have user accounts with the same name (and password if needed) to match each client machine.

           

          Gary Templeman


          ----- Original Message -----
          From: "landlord_dave" <davejcottrell@...>
          To: fhctech@yahoogroups.com
          Sent: Tuesday, February 10, 2009 12:28:23 PM GMT -08:00 US/Canada Pacific
          Subject: [fhctech] Re: DOS FanilySearch on a Network  with a Windows XP Operating System

          --- In fhctech@yahoogroups.com, "Fred Miesterfeld" <formiest@...>
          wrote:
          >
          > Has anyone installed the old with DOS FanilySearch on a Network with
          a Windows XP Operating System? If so, could you please tell me the
          procedure you used?
          >
          >  
          >
          > Fred Miesterfeld
          >
          You could also read the following to get the FS 2.27 install to work
          on Win XP:-


          The current policy is to have family history centers install Windows
          2000 SP4 on computers that will run FamilySearch 2.27 for DOS.

           

          There is still an issue with FamilySearch 2.27 ceasing to work when
          installed on Windows XP and when you use the resource CDs (instead of
          a network setup). Each time you insert a CD in a computer running
          Windows XP, it asks what you would like to do with that CD. This
          causes the FamilySearch 2.27 program to crash.

           

          FamilySearch 2.27 (DOS) install instructions for Windows XP:

          Log in as an administrator.
          Put the FamilySearch 2.27 Installation CD in your CD drive.
          The program will start installing automatically. At some point during
          this process, you will receive this message: "Cannot determine
          operating system." Click OK to cancel the installation.
          Create a new shortcut on the desktop by right-clicking on a blank area
          of the desktop. Then select New, and then Shortcut.
          Click the Browse button.
          Click the plus sign (+) next to My Computer, and then find and
          highlight the C:\Windows\system32\command.com file.
          Click OK. Click Next.
          For the name of the shortcut, enter MS-DOS Prompt. Then click Next.
          Click Finish. This will create an MS-DOS icon on your desktop called
          MS-DOS Prompt.
          Right-click this MS-DOS Prompt icon, and then click Properties.
          Click the Memory tab.
          Under the Expanded (EMS) memory area, select 4096.



          Click the Screen tab.
          Select Full-screen by clicking the circle next to it.




          Click Apply.
          Next, click the Program tab.
          In the Cmd line: box, type D:\install.exe (or replace the D with the
          correct letter for your CD drive).
          Click Apply, and then click OK.
          With the FamilySearch 2.27 CD in the CD drive, double-click the MS-DOS
          Prompt icon.
          Install the FamilySearch program according to the instructions on the
          screen.
          Create a shortcut for the FamilySearch DOS program by right-clicking
          on a blank area of the desktop. Then select New, and then Shortcut.
          Click the Browse button.
          Click the plus sign (+) next to My Computer, and then find and
          highlight the C:\PAS\PAS.exe file.
          Click OK. Then click Next.
          For the name of the shortcut, enter FamilySearch. Then click Next.
          Click Finish. This will create an MS-DOS icon on your desktop called
          FamilySearch.
          Right-click the FamilySearch icon, and click Properties.
          Click the Program tab.
          In the lower-right corner, click the Change Icon… button.
          Click the Browse… button.
          Find and select the C:\PAS\Fs.ico file.
          Click Open.
          To save the icon setting, click OK.
          Click the Memory tab.
          In the Expanded (EMS) memory area, select 10240.



          Click the Screen tab.
          Select Full-screen by clicking the circle next to it.
          Click the Misc tab.
          Remove the check mark next to Allow Screen Saver.
          In the Idle sensitivity box, move the slider bar all the way to the
          left.
          In the Windows shortcut keys area, remove the check mark next to
          Alt+Enter.



          Click Apply, and then click OK.
          Open My Computer, and then double-click the C: drive.
          Double-click the PAS folder.
          Double-click the Pasetup.txt file.
          Find the line DRIVED=CD-ROM (Caddy/Cartridge).
          Note: The line could read differently, depending on the letter of the
          CD-ROM drive and the type, such as DRIVEE=CD-ROM (Drawer/Tray).
          Change the last part to read CD-ROM (Generic).
          Note: This line is case sensitive.
          Click File, click Save, and close the window.
          Double-click the Pas.ini file.
          Find the line D=CD-ROM (Caddy/Cartridge).
          Note: The line could read differently, depending on the letter of the
          CD-ROM drive and the type, such as DRIVEE=CD-ROM (Drawer/Tray).
          Change the last part to read CD-ROM (Generic).
          Note: This line is case sensitive.
          Click File, click Save, and close the window.
          Drag the MS-DOS Prompt icon that was created in step 9 into the
          Recycle Bin, and empty the Recycle Bin.
          Note: As you run the program, you may get a pop-up window every time
          you insert a CD that asks what you want to do with it. This is a
          function of Windows XP. Please refer to the Windows help files for
          information on how to correct this.


          Regards
          Dave Cottrell
          FHC Director, Poole England Stake.





        • gtempleman1@comcast.net
          Lynn Shaw recently posted that the current Church policy is to have FHCs phase out of Windows 2000. Gary Templeman ... From: landlord_dave
          Message 4 of 10 , Feb 10, 2009
          • 0 Attachment

            Lynn Shaw recently posted that the current Church policy is to have FHCs phase out of Windows 2000.

             

            Gary Templeman

             


            ----- Original Message -----
            From: "landlord_dave" <davejcottrell@...>
            To: fhctech@yahoogroups.com
            Sent: Tuesday, February 10, 2009 12:28:23 PM GMT -08:00 US/Canada Pacific
            Subject: [fhctech] Re: DOS FanilySearch on a Network  with a Windows XP Operating System


            The current policy is to have family history centers install Windows
            2000 SP4 on computers that will run FamilySearch 2.27 for DOS.

          • Russell Hltn
            Also, I think you can install FamilySearch(DOS) via the LANDesk. However, I m not sure how you d go about configuring it after that.
            Message 5 of 10 , Feb 10, 2009
            • 0 Attachment
              Also, I think you can install FamilySearch(DOS) via the LANDesk.
              However, I'm not sure how you'd go about configuring it after that.
            • Fred Miesterfeld
              Thanks for all your sugestions. I ll give it a try again. Fred Miesterfeld ... From: Fred Miesterfeld To: fhctech@yahoogroups.com Sent: Tuesday, February 10,
              Message 6 of 10 , Feb 12, 2009
              • 0 Attachment
                Thanks for all your sugestions. I'll give it a try again.
                 
                Fred Miesterfeld
                ----- Original Message -----
                Sent: Tuesday, February 10, 2009 9:20 AM
                Subject: [fhctech] DOS FanilySearch on a Network with a Windows XP Operating System

                Has anyone installed the old with DOS FanilySearch on a Network with a Windows XP Operating System? If so, could you please tell me the procedure you used?

                Fred Miesterfeld



                No virus found in this incoming message.
                Checked by AVG - www.avg.com
                Version: 8.0.233 / Virus Database: 270.10.23/1948 - Release Date: 02/12/09 07:20:00
              • lazybee78
                Hi group, Using the instructions below I was able to install FamilySearch 2.27 on an Windows XP machine, (Just the Scottish Church records) I have those
                Message 7 of 10 , Jan 10, 2010
                • 0 Attachment
                  Hi group,

                  Using the instructions below I was able to install FamilySearch 2.27 on an Windows XP machine, (Just the Scottish Church records) I have those records in a shared folder on a second hard drive on this system and need to figure out what how to tell the program to look for those records on that drive instead of the CD-Rom.

                  Thanks in advance for the help

                  Lisa Baker
                  Computer Specialist
                  Hemet California Stake FHC


                  > FamilySearch 2.27 (DOS) install instructions for Windows XP:
                  >
                  > Log in as an administrator.
                  > Put the FamilySearch 2.27 Installation CD in your CD drive.
                  > The program will start installing automatically. At some point during
                  > this process, you will receive this message: "Cannot determine
                  > operating system." Click OK to cancel the installation.
                  > Create a new shortcut on the desktop by right-clicking on a blank area
                  > of the desktop. Then select New, and then Shortcut.
                  > Click the Browse button.
                  > Click the plus sign (+) next to My Computer, and then find and
                  > highlight the C:\Windows\system32\command.com file.
                  > Click OK. Click Next.
                  > For the name of the shortcut, enter MS-DOS Prompt. Then click Next.
                  > Click Finish. This will create an MS-DOS icon on your desktop called
                  > MS-DOS Prompt.
                  > Right-click this MS-DOS Prompt icon, and then click Properties.
                  > Click the Memory tab.
                  > Under the Expanded (EMS) memory area, select 4096.

                  > Click the Screen tab.
                  > Select Full-screen by clicking the circle next to it.
                  > Click Apply.
                  > Next, click the Program tab.
                  > In the Cmd line: box, type D:\install.exe (or replace the D with the correct letter for your CD drive).
                  > Click Apply, and then click OK.
                  > With the FamilySearch 2.27 CD in the CD drive, double-click the MS-DOS
                  > Prompt icon.
                  > Install the FamilySearch program according to the instructions on the
                  > screen.
                  > Create a shortcut for the FamilySearch DOS program by right-clicking
                  > on a blank area of the desktop. Then select New, and then Shortcut.
                  > Click the Browse button.
                  > Click the plus sign (+) next to My Computer, and then find and
                  > highlight the C:\PAS\PAS.exe file.
                  > Click OK. Then click Next.
                  > For the name of the shortcut, enter FamilySearch. Then click Next.
                  > Click Finish. This will create an MS-DOS icon on your desktop called
                  > FamilySearch.
                  > Right-click the FamilySearch icon, and click Properties.
                  > Click the Program tab.
                  > In the lower-right corner, click the Change Icon… button.
                  > Click the Browse… button.
                  > Find and select the C:\PAS\Fs.ico file.
                  > Click Open.
                  > To save the icon setting, click OK.
                  > Click the Memory tab.
                  > In the Expanded (EMS) memory area, select 10240.
                  >
                  >
                  >
                  > Click the Screen tab.
                  > Select Full-screen by clicking the circle next to it.
                  > Click the Misc tab.
                  > Remove the check mark next to Allow Screen Saver.
                  > In the Idle sensitivity box, move the slider bar all the way to the
                  > left.
                  > In the Windows shortcut keys area, remove the check mark next to
                  > Alt+Enter.
                  >
                  >
                  >
                  > Click Apply, and then click OK.
                  > Open My Computer, and then double-click the C: drive.
                  > Double-click the PAS folder.
                  > Double-click the Pasetup.txt file.
                  > Find the line DRIVED=CD-ROM (Caddy/Cartridge).
                  > Note: The line could read differently, depending on the letter of the
                  > CD-ROM drive and the type, such as DRIVEE=CD-ROM (Drawer/Tray).
                  > Change the last part to read CD-ROM (Generic).
                  > Note: This line is case sensitive.
                  > Click File, click Save, and close the window.
                  > Double-click the Pas.ini file.
                  > Find the line D=CD-ROM (Caddy/Cartridge).
                  > Note: The line could read differently, depending on the letter of the
                  > CD-ROM drive and the type, such as DRIVEE=CD-ROM (Drawer/Tray).
                  > Change the last part to read CD-ROM (Generic).
                  > Note: This line is case sensitive.
                  > Click File, click Save, and close the window.
                  > Drag the MS-DOS Prompt icon that was created in step 9 into the
                  > Recycle Bin, and empty the Recycle Bin.
                  > Note: As you run the program, you may get a pop-up window every time
                  > you insert a CD that asks what you want to do with it. This is a
                  > function of Windows XP. Please refer to the Windows help files for
                  > information on how to correct this.
                  >
                  >
                  > Regards
                  > Dave Cottrell
                  > FHC Director, Poole England Stake.
                  >
                • Perry E Shumway
                  You have to map the drive/folder in which the Scottish records are stored and then run FamilySearch DOS setup and assign the mapped drive letter as a network
                  Message 8 of 10 , Jan 11, 2010
                  • 0 Attachment
                    You have to map the drive/folder in which the Scottish records are stored and then run FamilySearch DOS setup and assign the mapped drive letter as a network drive. This is the basic procedure and I remember it. It has been some time since I last did it.


                    From: lazybee78 <BakerFamily78@...>
                    To: fhctech@yahoogroups.com
                    Sent: Sun, January 10, 2010 6:24:13 PM
                    Subject: [fhctech] Re: DOS FanilySearch on a Network with a Windows XP Operating System

                     



                    Hi group,

                    Using the instructions below I was able to install FamilySearch 2.27 on an Windows XP machine, (Just the Scottish Church records) I have those records in a shared folder on a second hard drive on this system and need to figure out what how to tell the program to look for those records on that drive instead of the CD-Rom.

                    Thanks in advance for the help

                    Lisa Baker
                    Computer Specialist
                    Hemet California Stake FHC

                    > FamilySearch 2.27 (DOS) install instructions for Windows XP:
                    >
                    > Log in as an administrator.
                    > Put the FamilySearch 2.27 Installation CD in your CD drive.
                    > The program will start installing automatically. At some point during
                    > this process, you will receive this message: "Cannot determine
                    > operating system." Click OK to cancel the installation.
                    > Create a new shortcut on the desktop by right-clicking on a blank area
                    > of the desktop. Then select New, and then Shortcut.
                    > Click the Browse button.
                    > Click the plus sign (+) next to My Computer, and then find and
                    > highlight the C:\Windows\system32 \command. com file.
                    > Click OK. Click Next.
                    > For the name of the shortcut, enter MS-DOS Prompt. Then click Next.
                    > Click Finish. This will create an MS-DOS icon on your desktop called
                    > MS-DOS Prompt.
                    > Right-click this MS-DOS Prompt icon, and then click Properties.
                    > Click the Memory tab.
                    > Under the Expanded (EMS) memory area, select 4096.

                    > Click the Screen tab.
                    > Select Full-screen by clicking the circle next to it.
                    > Click Apply.
                    > Next, click the Program tab.
                    > In the Cmd line: box, type D:\install.exe (or replace the D with the correct letter for your CD drive).
                    > Click Apply, and then click OK.
                    > With the FamilySearch 2.27 CD in the CD drive, double-click the MS-DOS
                    > Prompt icon.
                    > Install the FamilySearch program according to the instructions on the
                    > screen.
                    > Create a shortcut for the FamilySearch DOS program by right-clicking
                    > on a blank area of the desktop. Then select New, and then Shortcut.
                    > Click the Browse button.
                    > Click the plus sign (+) next to My Computer, and then find and
                    > highlight the C:\PAS\PAS.exe file.
                    > Click OK. Then click Next.
                    > For the name of the shortcut, enter FamilySearch. Then click Next.
                    > Click Finish. This will create an MS-DOS icon on your desktop called
                    > FamilySearch.
                    > Right-click the FamilySearch icon, and click Properties.
                    > Click the Program tab.
                    > In the lower-right corner, click the Change Icon… button.
                    > Click the Browse… button.
                    > Find and select the C:\PAS\Fs.ico file.
                    > Click Open.
                    > To save the icon setting, click OK.
                    > Click the Memory tab.
                    > In the Expanded (EMS) memory area, select 10240.
                    >
                    >
                    >
                    > Click the Screen tab.
                    > Select Full-screen by clicking the circle next to it.
                    > Click the Misc tab.
                    > Remove the check mark next to Allow Screen Saver.
                    > In the Idle sensitivity box, move the slider bar all the way to the
                    > left.
                    > In the Windows shortcut keys area, remove the check mark next to
                    > Alt+Enter.
                    >
                    >
                    >
                    > Click Apply, and then click OK.
                    > Open My Computer, and then double-click the C: drive.
                    > Double-click the PAS folder.
                    > Double-click the Pasetup.txt file.
                    > Find the line DRIVED=CD-ROM (Caddy/Cartridge) .
                    > Note: The line could read differently, depending on the letter of the
                    > CD-ROM drive and the type, such as DRIVEE=CD-ROM (Drawer/Tray) .
                    > Change the last part to read CD-ROM (Generic).
                    > Note: This line is case sensitive.
                    > Click File, click Save, and close the window.
                    > Double-click the Pas.ini file.
                    > Find the line D=CD-ROM (Caddy/Cartridge) .
                    > Note: The line could read differently, depending on the letter of the
                    > CD-ROM drive and the type, such as DRIVEE=CD-ROM (Drawer/Tray) .
                    > Change the last part to read CD-ROM (Generic).
                    > Note: This line is case sensitive.
                    > Click File, click Save, and close the window.
                    > Drag the MS-DOS Prompt icon that was created in step 9 into the
                    > Recycle Bin, and empty the Recycle Bin.
                    > Note: As you run the program, you may get a pop-up window every time
                    > you insert a CD that asks what you want to do with it. This is a
                    > function of Windows XP. Please refer to the Windows help files for
                    > information on how to correct this.
                    >
                    >
                    > Regards
                    > Dave Cottrell
                    > FHC Director, Poole England Stake.
                    >


                  Your message has been successfully submitted and would be delivered to recipients shortly.