Loading ...
Sorry, an error occurred while loading the content.

[Sharing knowlegde] Metro-E via GPON menggunakan protokol EIGRP

Expand Messages
  • ari yuniarto
    Dear all, Kalo ada Cust yg memakai Metro-E via GPON dan config router di Cust menggunakan protokol EIGRP, Disini ada config sedikit yg dapat ditambahkan Cust
    Message 1 of 1 , Jan 17, 2011
    • 0 Attachment

      Dear all,

      Kalo ada Cust yg memakai Metro-E via GPON dan config router di Cust menggunakan protokol EIGRP,

      Disini ada config sedikit yg dapat ditambahkan Cust di masing-masing Router.

       

      simulasi routing eigrp sederhana sbb:
      router----ont---olt----router

      Berikut adalah konfigurasi router A:
      interface GigabitEthernet0/0
       description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
       ip address 10.0.0.1 255.255.255.0
       no ip redirects
       no ip proxy-arp
       ip summary-address eigrp 100 10.0.0.0 255.255.255.0 5
       logging event subif-link-status
       duplex auto
       speed auto
       media-type rj45
       negotiation auto
      !
      router eigrp 100
       network 10.0.0.0 0.0.0.255
       auto-summary
       neighbor 10.0.0.2 GigabitEthernet0/0
      !

      cisco-A#sho ip eigrp nei
      IP-EIGRP neighbors for process 100
      H   Address                 Interface       Hold Uptime   SRTT   RTO  Q  Seq
                                                  (sec)         (ms)       Cnt Num
      0   10.0.0.2                Gi0/0             13 00:04:54    9   200  0  2
      cisco-A#ping 10.0.0.2

      Type escape sequence to abort.
      Sending 5, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds:
      !!!!!
      Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms

      Berikut ini adalah konfigurasi router B:

      interface GigabitEthernet0/0
       description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
       ip address 10.0.0.2 255.255.255.0
       ip summary-address eigrp 100 10.0.0.0 255.255.255.0 5
       duplex auto
       speed auto
       media-type rj45
       negotiation auto
      !
      router eigrp 100
       network 10.0.0.0 0.0.0.255
       auto-summary
       neighbor 10.0.0.1 GigabitEthernet0/0
      !
      cisco-B#sho ip eigrp nei
      IP-EIGRP neighbors for process 100
      H   Address                 Interface       Hold Uptime   SRTT   RTO  Q  Seq
                                                  (sec)         (ms)       Cnt Num
      0   10.0.0.1                Gi0/0             11 00:06:33    4   200  0  2
      cisco-B#ping 10.0.0.1

      Type escape sequence to abort.
      Sending 5, 100-byte ICMP Echos to 10.0.0.1, timeout is 2 seconds:
      !!!!!
      Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms

       

       

      semoga bisa bermanfaat dan CMIIW (correct me if im wrong)

       
      Kaisar       - Ari -
       081322130088                                  
      ariyuniarto.multiply.com
      YM & Skype : kaisarclub


    Your message has been successfully submitted and would be delivered to recipients shortly.