Re: [dxsoft] seeing my transmit on cwget.
Check your Setup tab for the Input soundcard number and the Output soundcard number. Sometimes Windows decides to change those settings on its own.
The other thing to check is are you working someone split? I’ve lost the echo of my transmit text several times when the station I’m trying to work has a wide split. When tuning to his signal CWGet cannot “hear” your signal outside the pass band. I’ve found clicking on the Auto Threshold button will sometimes resolve this by presenting two different red trace lines in the lower screen area. One tracks his signal, the other yours and now your text shows up too.
From: John K5JRW
Sent: June 24, 2013 9:15 AM
Subject: [dxsoft] seeing my transmit on cwget.
Hi to all
At onetime I was able to see my transmit text and signal on cwget,however now I can't.Not sure what I have done, I am using A Yaesu ft450 with a splitter on my key plug.One goes to the computer to key rig using cwtype,the other to my keyer.Everything keys as it should.
My interface is a simple keying interface.I use a Donner digital interface for other modes.I am using usb ports for keying. I use line in and line out with the Donner digital interface.
Any ideas I would appreciate.
Tnx in advance and 73 K5JRW John
[Non-text portions of this message have been removed]