Loading ...
Sorry, an error occurred while loading the content.
Advanced Search
Author
Subject
Message
Special notice only

10 results from messages in dxatlas_group

Advanced Search
  • Hello Group, Fixed the problem with the skimmer and syncing with the rig. went into the lp-bridge and looked at the if freq that it was reading for the K3. Changed the audio IF freq in the skimmer a couple times (up/dwn) All working fine now...birdge showed 3200 for the if, I put -3200 in the skimmer and it worked.... Don..w2xb
    haircutter14085 Aug 3, 2008
  • --- In dxatlas_group@^$1, Pete Smith wrote: > Hi Pete, I will do that and let you know how I make out. Its strange. It was working fb until I started playing around with Lp-Pan and the bridge software. Tried uninstalling and doing it over. No Joy! Do will let you know how I make out. Thanks again my friend Don...w2xb > Ah, then take a look at the discussion of the softrock-if mode...
    haircutter14085 Aug 3, 2008
  • --- In dxatlas_group@^$1, Pete Smith wrote: > Hi Pete, I'm using a external soundcard (emu 202) and the Lp-PAN and have the softrock-if checked... Don.... > On the very first tab - Radio. I'm guessing that perhaps you are running in > 3-KHz mode, using the audio from your radio. Or are you somehow connecting > to the IF output of the radio in an effort to use it more as a...
    haircutter14085 Aug 3, 2008
  • Fetching Sponsored Content...
  • --- In dxatlas_group@^$1, Pete Smith wrote: > Hi Pete, Where on the skimmer is the mode? All I see is the band plan? Don.. > Sorry, I meant what Skimmer mode? > > 73, Pete > > At 09:46 AM 8/3/2008, you wrote: > >--- In dxatlas_group@^$2, Pete Smith wrote: > > > > >Morning Pete, > >Cw mode on K3... > > > >Don... > > > > > > > > > What mode are you using Skimmer in? > > > > > > 73...
    haircutter14085 Aug 3, 2008
  • --- In dxatlas_group@^$1, Pete Smith wrote: > Morning Pete, Cw mode on K3... Don... > What mode are you using Skimmer in? > > 73, Pete N4ZR > > At 09:01 AM 8/3/2008, you wrote: > >I am using the K3 and the E-MU soundcard with the cw-skimmer. When > >using the cw-skimmer the call signs are about 3 kc off freq. Is there a > >way to correct this? > > > >Don..w2xb...
    haircutter14085 Aug 3, 2008
  • I am using the K3 and the E-MU soundcard with the cw-skimmer. When using the cw-skimmer the call signs are about 3 kc off freq. Is there a way to correct this? Don..w2xb
    haircutter14085 Aug 3, 2008
  • Hello, Well I finally have it working fb. Thanks to all that gave me all the tips and help. Great piece of software Alex. I finally uninstalled the program and also deleted the file that stays behind in program files. Reinstalled the software and left the audio "if" at zero where it was. When I click on a call in call list or on the screen. It goes rite to the center. Thanks to all...
    haircutter14085 Jul 15, 2008
  • Hello fellas, I have tried all the settings and get the same thing with the freqs. If I am copying a signal on the K3 at 7.034 it shows up on the skimmer at 7.036 , Guess it is the soundcard in the navigator. Going to connect a external later and see what happans.. Don...w2xb
    haircutter14085 Jul 15, 2008
  • Hello Frank, Thanks for the info and fast reply. I have all the setting and still the same. I click on a call sign and and the rig freq move to that freq. But the actual signal is about 3 kc lower. It must be the sound card in the Navigator thats not compatable. Think I will get another sound card and see what I get. All is working like it should, but its not going to the right...
    haircutter14085 Jul 14, 2008
  • Hello group, I am new to using the cw skimmer. I have it setup with a K3 and a LP- PAN also using the Navigator interface.Seems to be woring fine except when I click on a call sign, and the rig changes freqs I am not on the same freq as the call sign. What setting am I missing? Don...w2xb
    haircutter14085 Jul 14, 2008