After a PC overheating problem..... (Fan failure)
I have now got Faros running on a faster PC on one side of the shack,
with the radio on the other side of the room, with all serial comm's now
going via the LAN with the help of an old laptop and the Eterlogic tool
working as a server by the radio. (Faros won't run on that machine, due
to soundcard or CPU speed issues of some sort)
The faster machine with Faros on, is not physicaly able to be put near
the radio (it's too big) hence this setup. At the moment, I'm using one
of the HW Group's Virtual Serial Port tools to communincate with the
Eterlogic server, that it does just fine, and presents a Virtual Serial
port (COM5) to the system in one hit.
Unfortunately, I still have to run an audio cable round the room, and
that introduces mains hum etc as I don't have an audio isolator as yet..
However, with a real audio cable it's a working system, while I get time
to repair the original Faros PC that overheated when a fan failed, after
a scheduled Off time.
The down side of all this, is I can't use my EchoLink proxy, so I need
to use someone else's if I want to use e-Link from work during lunch
time. It seems the extra network traffic, upsets Faros's NTP access
routines, if both systems run on the same machine. (Win2k, P4/1.8G,
1.5G Ram) Not a show stopper.... The same NTP symptoms show, when you
access that machine over a VPN with VNC I find too. Not entirely
unexpectedly I suspect...
Regars to All...
This mail has been scanned by Palmer Cook Computer Services Limited. www.palmercook.co.uk