Loading ...
Sorry, an error occurred while loading the content.

Re: [dxatlas] OmniRig/HamPortOmniRig/Bandmaster with older Icom

Expand Messages
  • Alex, VE3NEA
    Hi Lou, Please generate a new OmniRig log with transceive off and send it to my direct email. Be sure to change the frequency and mode while collecting the
    Message 1 of 3 , Sep 13, 2004
    • 0 Attachment
      Hi Lou,

      Please generate a new OmniRig log with transceive off and send it to my
      direct email. Be sure to change the frequency and mode while collecting the
      log.

      73 Alex VE3NEA



      ----- Original Message -----
      From: "L. Sica" <lsica@...>
      To: <dxatlas_group@yahoogroups.com>; <dxsoft@...>
      Sent: Sunday, September 12, 2004 13:56
      Subject: Re: [dxatlas] OmniRig/HamPortOmniRig/Bandmaster with older Icom


      > Hello Alex (and group)
      >
      > I've downloaded it, I have DTR and RTS set to high, and I have Transceive
      mode set to "off" on the Icom. I'm still running into some problems
      >
      > 1) I can set frequency with Hamport OmniRig, but having the program
      respond to frequency has a short (1/2 to one second) delay. My poll rate is
      set to 100ms, my timeout to 4000ms.
      > 2) I can set mode with HamPort OmniRig, but the program never displays the
      mode of the radio.
      >
      > And oddly enough, I get the SAME response whether Transcieve mode is set
      to "on" or "off". Because of this, and because I did have to manually fix
      the "rig" file, I'd like to ask if anyone else has got an older Icom rig to
      work with the Omni Rig engine? Is my rig file incorrect? Is "transcieve
      mode" not working properly in my rig?
      >
      >
      >
      > ----- Original Message -----
      > From: Alex, VE3NEA
      > To: dxatlas_group@yahoogroups.com
      > Sent: Sunday, September 12, 2004 8:44 AM
      > Subject: Re: [dxatlas] OmniRig/HamPortOmniRig/Bandmaster with older Icom
      >
      >
      > Hi Lou,
      >
      > Please download and install OmniRig 1.2, and set DTR and RTS to High in
      the
      > RIG 1 Settings dialog. Also, make sure that CI-V Transceive is disabled
      in
      > your rig.
      >
      > 73 Alex VE3NEA
      >
      >
      >
      >
      > > Hello group(s)
      > >
      > > Has anyone on these groups interfaced a program with the Omni Rig
      Engine
      > to
      > > an older Icom with an LCU-3 interface, specifically an IC-761? I'm
      having
      > > problems making mine work.
      > >
      > > Thanks to all
      >
      >
      > Yahoo! Groups Sponsor
      > ADVERTISEMENT
      >
      >
      >
      >
      >
      > --------------------------------------------------------------------------
      ----
      > Yahoo! Groups Links
      >
      > a.. To visit your group on the web, go to:
      > http://groups.yahoo.com/group/dxatlas_group/
      >
      > b.. To unsubscribe from this group, send an email to:
      > dxatlas_group-unsubscribe@yahoogroups.com
      >
      > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
      Service.
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >
      >
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.