Loading ...
Sorry, an error occurred while loading the content.

Re: [dxatlas] BandPlan.ini

Expand Messages
  • Alex, VE3NEA
    Hi Robert, Maybe you edited the wrong plan, not the one you have selected in Band Master? 73 Alex VE3NEA ... Hi Alex, I tried to edit bandplan.ini and was
    Message 1 of 15 , Feb 18, 2009
    • 0 Attachment
      Hi Robert,

      Maybe you edited the wrong plan, not the one you have selected in Band
      Master?

      73 Alex VE3NEA


      ----- Original Message -----

      Hi Alex,

      I tried to edit bandplan.ini and was successful for the 80M band. But
      when I tried to change the 40M is wasn't successful, the data dit not
      change in bandplan. I tried to set the end at 7200 for 40Mtr en
      reduced the end of 80Mtr at 3800
      Any clues?

      73,

      Robert PE1CWU
    • rdvrey
      The one that I need is IARU region 1 but I tried this with several regions. I wasn t able to reduce the bandwidth in IARU REGION 2 for 40 mtr as well. 73,
      Message 2 of 15 , Feb 18, 2009
      • 0 Attachment
        The one that I need is IARU region 1 but I tried this with several
        regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
        mtr as well.

        73,

        Robert

        --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@...> wrote:
        >
        > Hi Robert,
        >
        > Maybe you edited the wrong plan, not the one you have selected in Band
        > Master?
        >
        > 73 Alex VE3NEA
        >
        >
        > ----- Original Message -----
        >
        > Hi Alex,
        >
        > I tried to edit bandplan.ini and was successful for the 80M band. But
        > when I tried to change the 40M is wasn't successful, the data dit not
        > change in bandplan. I tried to set the end at 7200 for 40Mtr en
        > reduced the end of 80Mtr at 3800
        > Any clues?
        >
        > 73,
        >
        > Robert PE1CWU
        >
      • rdvrey
        Hi Alex, example: [IARU Region 1] 1810=CW 1838=DIG,CW 1840=DIG,PH,CW 1842=PH,CW 1880=END 3500=CW-DX,CW-contest 3510=CW-contest 3560=CW 3580=DIG,CW
        Message 3 of 15 , Feb 18, 2009
        • 0 Attachment
          Hi Alex,

          example:
          [IARU Region 1]
          1810=CW
          1838=DIG,CW
          1840=DIG,PH,CW
          1842=PH,CW
          1880=END

          3500=CW-DX,CW-contest
          3510=CW-contest
          3560=CW
          3580=DIG,CW
          3600=DIG,PH-contest,CW
          3620=PH-contest,CW
          3650=PH,CW
          3700=PH-contest,CW
          3730=PH-contest,SSTV,CW
          3740=PH-contest,CW
          3775=PH-DX,PH-contest
          3800=END

          7000=CW
          7030=DIG,CW,SSTV
          7045=DIG,PH,CW
          7100=PH,CW
          7200=END


          73,

          Robert PE1CWU

          --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@...> wrote:
          >
          > The one that I need is IARU region 1 but I tried this with several
          > regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
          > mtr as well.
          >
          > 73,
          >
          > Robert
          >
          > --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@> wrote:
          > >
          > > Hi Robert,
          > >
          > > Maybe you edited the wrong plan, not the one you have selected in
          Band
          > > Master?
          > >
          > > 73 Alex VE3NEA
          > >
          > >
          > > ----- Original Message -----
          > >
          > > Hi Alex,
          > >
          > > I tried to edit bandplan.ini and was successful for the 80M band. But
          > > when I tried to change the 40M is wasn't successful, the data dit not
          > > change in bandplan. I tried to set the end at 7200 for 40Mtr en
          > > reduced the end of 80Mtr at 3800
          > > Any clues?
          > >
          > > 73,
          > >
          > > Robert PE1CWU
          > >
          >
        • rdvrey
          Hi Alex, In fact if I look at the values in the 40 mtr band where it changes from cw into dig,cw and into PH,CW I cannot find the frequency values back in
          Message 4 of 15 , Feb 18, 2009
          • 0 Attachment
            Hi Alex,

            In fact if I look at the values in the 40 mtr band where it changes
            from cw into dig,cw and into PH,CW I cannot find the frequency values
            back in bandplan.ini ?
            What am I doing wrong?

            73,

            Robert PE1CWU

            --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@...> wrote:
            >
            > Hi Alex,
            >
            > example:
            > [IARU Region 1]
            > 1810=CW
            > 1838=DIG,CW
            > 1840=DIG,PH,CW
            > 1842=PH,CW
            > 1880=END
            >
            > 3500=CW-DX,CW-contest
            > 3510=CW-contest
            > 3560=CW
            > 3580=DIG,CW
            > 3600=DIG,PH-contest,CW
            > 3620=PH-contest,CW
            > 3650=PH,CW
            > 3700=PH-contest,CW
            > 3730=PH-contest,SSTV,CW
            > 3740=PH-contest,CW
            > 3775=PH-DX,PH-contest
            > 3800=END
            >
            > 7000=CW
            > 7030=DIG,CW,SSTV
            > 7045=DIG,PH,CW
            > 7100=PH,CW
            > 7200=END
            >
            >
            > 73,
            >
            > Robert PE1CWU
            >
            > --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@> wrote:
            > >
            > > The one that I need is IARU region 1 but I tried this with several
            > > regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
            > > mtr as well.
            > >
            > > 73,
            > >
            > > Robert
            > >
            > > --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@> wrote:
            > > >
            > > > Hi Robert,
            > > >
            > > > Maybe you edited the wrong plan, not the one you have selected in
            > Band
            > > > Master?
            > > >
            > > > 73 Alex VE3NEA
            > > >
            > > >
            > > > ----- Original Message -----
            > > >
            > > > Hi Alex,
            > > >
            > > > I tried to edit bandplan.ini and was successful for the 80M
            band. But
            > > > when I tried to change the 40M is wasn't successful, the data
            dit not
            > > > change in bandplan. I tried to set the end at 7200 for 40Mtr en
            > > > reduced the end of 80Mtr at 3800
            > > > Any clues?
            > > >
            > > > 73,
            > > >
            > > > Robert PE1CWU
            > > >
            > >
            >
          • Alex, VE3NEA
            Robert , I loaded your bandplan in Band Master, and it worked exactly as you defined it - the 40 m band ended at 7200. Make sure that you are not editing the
            Message 5 of 15 , Feb 18, 2009
            • 0 Attachment
              Robert ,

              I loaded your bandplan in Band Master, and it worked exactly as you defined
              it - the 40 m band ended at 7200. Make sure that you are not editing the old
              bandplan.ini file in the BandMaster folder, that file is no longer used.

              73 Alex VE3NEA




              ----- Original Message -----
              From: "rdvrey" <rdvrey@...>
              To: <dxatlas_group@yahoogroups.com>
              Sent: Wednesday, February 18, 2009 07:03 PM
              Subject: Re: [dxatlas] BandPlan.ini


              Hi Alex,

              example:
              [IARU Region 1]
              1810=CW
              1838=DIG,CW
              1840=DIG,PH,CW
              1842=PH,CW
              1880=END

              3500=CW-DX,CW-contest
              3510=CW-contest
              3560=CW
              3580=DIG,CW
              3600=DIG,PH-contest,CW
              3620=PH-contest,CW
              3650=PH,CW
              3700=PH-contest,CW
              3730=PH-contest,SSTV,CW
              3740=PH-contest,CW
              3775=PH-DX,PH-contest
              3800=END

              7000=CW
              7030=DIG,CW,SSTV
              7045=DIG,PH,CW
              7100=PH,CW
              7200=END


              73,

              Robert PE1CWU

              --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@...> wrote:
              >
              > The one that I need is IARU region 1 but I tried this with several
              > regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
              > mtr as well.
              >
              > 73,
              >
              > Robert
              >
              > --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@> wrote:
              > >
              > > Hi Robert,
              > >
              > > Maybe you edited the wrong plan, not the one you have selected in
              Band
              > > Master?
              > >
              > > 73 Alex VE3NEA
              > >
              > >
              > > ----- Original Message -----
              > >
              > > Hi Alex,
              > >
              > > I tried to edit bandplan.ini and was successful for the 80M band. But
              > > when I tried to change the 40M is wasn't successful, the data dit not
              > > change in bandplan. I tried to set the end at 7200 for 40Mtr en
              > > reduced the end of 80Mtr at 3800
              > > Any clues?
              > >
              > > 73,
              > >
              > > Robert PE1CWU
              > >
              >
            • Geoff Anderson
              Alex, I may well have asked this before but have forgotten the answer. CWSkimmer - Is it possible to change between the two radios I have set up in Skimmer
              Message 6 of 15 , Feb 18, 2009
              • 0 Attachment
                Alex,

                I may well have asked this before but have forgotten the answer.
                CWSkimmer - Is it possible to change between the two radios I have set up
                in Skimmer from an external source/signal and if so how is it done please?
                Changeover between my two rigs is by using an MK2R+ and a control signal
                sent from Logger32 so how do I get Skimmer to follow please?

                73 de Geoff
                G3NPA
                Geoff.Anderson@...


                ----- Original Message -----
                From: "Alex, VE3NEA" <alshovk@...>
                To: <dxatlas_group@yahoogroups.com>
                Sent: Thursday, February 19, 2009 12:29 AM
                Subject: Re: [dxatlas] BandPlan.ini


                > Robert ,
                >
                > I loaded your bandplan in Band Master, and it worked exactly as you
                > defined
                > it - the 40 m band ended at 7200. Make sure that you are not editing the
                > old
                > bandplan.ini file in the BandMaster folder, that file is no longer used.
                >
                > 73 Alex VE3NEA
                >
                >
                >
                >
                > ----- Original Message -----
                > From: "rdvrey" <rdvrey@...>
                > To: <dxatlas_group@yahoogroups.com>
                > Sent: Wednesday, February 18, 2009 07:03 PM
                > Subject: Re: [dxatlas] BandPlan.ini
                >
                >
                > Hi Alex,
                >
                > example:
                > [IARU Region 1]
                > 1810=CW
                > 1838=DIG,CW
                > 1840=DIG,PH,CW
                > 1842=PH,CW
                > 1880=END
                >
                > 3500=CW-DX,CW-contest
                > 3510=CW-contest
                > 3560=CW
                > 3580=DIG,CW
                > 3600=DIG,PH-contest,CW
                > 3620=PH-contest,CW
                > 3650=PH,CW
                > 3700=PH-contest,CW
                > 3730=PH-contest,SSTV,CW
                > 3740=PH-contest,CW
                > 3775=PH-DX,PH-contest
                > 3800=END
                >
                > 7000=CW
                > 7030=DIG,CW,SSTV
                > 7045=DIG,PH,CW
                > 7100=PH,CW
                > 7200=END
                >
                >
                > 73,
                >
                > Robert PE1CWU
                >
                > --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@...> wrote:
                >>
                >> The one that I need is IARU region 1 but I tried this with several
                >> regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
                >> mtr as well.
                >>
                >> 73,
                >>
                >> Robert
                >>
                >> --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@> wrote:
                >> >
                >> > Hi Robert,
                >> >
                >> > Maybe you edited the wrong plan, not the one you have selected in
                > Band
                >> > Master?
                >> >
                >> > 73 Alex VE3NEA
                >> >
                >> >
                >> > ----- Original Message -----
                >> >
                >> > Hi Alex,
                >> >
                >> > I tried to edit bandplan.ini and was successful for the 80M band. But
                >> > when I tried to change the 40M is wasn't successful, the data dit not
                >> > change in bandplan. I tried to set the end at 7200 for 40Mtr en
                >> > reduced the end of 80Mtr at 3800
                >> > Any clues?
                >> >
                >> > 73,
                >> >
                >> > Robert PE1CWU
                >> >
                >>
                >
                >
                >
                >
              • rdvrey
                Hi Alex, Yep you are right. thanks, Robert PE1CWU ... defined ... the old ... band. But ... dit not
                Message 7 of 15 , Feb 18, 2009
                • 0 Attachment
                  Hi Alex,

                  Yep you are right.

                  thanks,

                  Robert PE1CWU

                  --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@...> wrote:
                  >
                  > Robert ,
                  >
                  > I loaded your bandplan in Band Master, and it worked exactly as you
                  defined
                  > it - the 40 m band ended at 7200. Make sure that you are not editing
                  the old
                  > bandplan.ini file in the BandMaster folder, that file is no longer used.
                  >
                  > 73 Alex VE3NEA
                  >
                  >
                  >
                  >
                  > ----- Original Message -----
                  > From: "rdvrey" <rdvrey@...>
                  > To: <dxatlas_group@yahoogroups.com>
                  > Sent: Wednesday, February 18, 2009 07:03 PM
                  > Subject: Re: [dxatlas] BandPlan.ini
                  >
                  >
                  > Hi Alex,
                  >
                  > example:
                  > [IARU Region 1]
                  > 1810=CW
                  > 1838=DIG,CW
                  > 1840=DIG,PH,CW
                  > 1842=PH,CW
                  > 1880=END
                  >
                  > 3500=CW-DX,CW-contest
                  > 3510=CW-contest
                  > 3560=CW
                  > 3580=DIG,CW
                  > 3600=DIG,PH-contest,CW
                  > 3620=PH-contest,CW
                  > 3650=PH,CW
                  > 3700=PH-contest,CW
                  > 3730=PH-contest,SSTV,CW
                  > 3740=PH-contest,CW
                  > 3775=PH-DX,PH-contest
                  > 3800=END
                  >
                  > 7000=CW
                  > 7030=DIG,CW,SSTV
                  > 7045=DIG,PH,CW
                  > 7100=PH,CW
                  > 7200=END
                  >
                  >
                  > 73,
                  >
                  > Robert PE1CWU
                  >
                  > --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@> wrote:
                  > >
                  > > The one that I need is IARU region 1 but I tried this with several
                  > > regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
                  > > mtr as well.
                  > >
                  > > 73,
                  > >
                  > > Robert
                  > >
                  > > --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@> wrote:
                  > > >
                  > > > Hi Robert,
                  > > >
                  > > > Maybe you edited the wrong plan, not the one you have selected in
                  > Band
                  > > > Master?
                  > > >
                  > > > 73 Alex VE3NEA
                  > > >
                  > > >
                  > > > ----- Original Message -----
                  > > >
                  > > > Hi Alex,
                  > > >
                  > > > I tried to edit bandplan.ini and was successful for the 80M
                  band. But
                  > > > when I tried to change the 40M is wasn't successful, the data
                  dit not
                  > > > change in bandplan. I tried to set the end at 7200 for 40Mtr en
                  > > > reduced the end of 80Mtr at 3800
                  > > > Any clues?
                  > > >
                  > > > 73,
                  > > >
                  > > > Robert PE1CWU
                  > > >
                  > >
                  >
                • Alex, VE3NEA
                  Hi Geoff, You can do this only via the Settings dialog. 73 Alex VE3NEA ... From: Geoff Anderson To:
                  Message 8 of 15 , Feb 18, 2009
                  • 0 Attachment
                    Hi Geoff,

                    You can do this only via the Settings dialog.

                    73 Alex VE3NEA



                    ----- Original Message -----
                    From: "Geoff Anderson" <Geoff.Anderson@...>
                    To: <dxatlas_group@yahoogroups.com>
                    Sent: Wednesday, February 18, 2009 07:35 PM
                    Subject: Re: [dxatlas] BandPlan.ini


                    > Alex,
                    >
                    > I may well have asked this before but have forgotten the answer.
                    > CWSkimmer - Is it possible to change between the two radios I have set up
                    > in Skimmer from an external source/signal and if so how is it done please?
                    > Changeover between my two rigs is by using an MK2R+ and a control signal
                    > sent from Logger32 so how do I get Skimmer to follow please?
                    >
                    > 73 de Geoff
                    > G3NPA
                    > Geoff.Anderson@...
                    >
                    >
                    > ----- Original Message -----
                    > From: "Alex, VE3NEA" <alshovk@...>
                    > To: <dxatlas_group@yahoogroups.com>
                    > Sent: Thursday, February 19, 2009 12:29 AM
                    > Subject: Re: [dxatlas] BandPlan.ini
                    >
                    >
                    >> Robert ,
                    >>
                    >> I loaded your bandplan in Band Master, and it worked exactly as you
                    >> defined
                    >> it - the 40 m band ended at 7200. Make sure that you are not editing the
                    >> old
                    >> bandplan.ini file in the BandMaster folder, that file is no longer used.
                    >>
                    >> 73 Alex VE3NEA
                    >>
                    >>
                    >>
                    >>
                    >> ----- Original Message -----
                    >> From: "rdvrey" <rdvrey@...>
                    >> To: <dxatlas_group@yahoogroups.com>
                    >> Sent: Wednesday, February 18, 2009 07:03 PM
                    >> Subject: Re: [dxatlas] BandPlan.ini
                    >>
                    >>
                    >> Hi Alex,
                    >>
                    >> example:
                    >> [IARU Region 1]
                    >> 1810=CW
                    >> 1838=DIG,CW
                    >> 1840=DIG,PH,CW
                    >> 1842=PH,CW
                    >> 1880=END
                    >>
                    >> 3500=CW-DX,CW-contest
                    >> 3510=CW-contest
                    >> 3560=CW
                    >> 3580=DIG,CW
                    >> 3600=DIG,PH-contest,CW
                    >> 3620=PH-contest,CW
                    >> 3650=PH,CW
                    >> 3700=PH-contest,CW
                    >> 3730=PH-contest,SSTV,CW
                    >> 3740=PH-contest,CW
                    >> 3775=PH-DX,PH-contest
                    >> 3800=END
                    >>
                    >> 7000=CW
                    >> 7030=DIG,CW,SSTV
                    >> 7045=DIG,PH,CW
                    >> 7100=PH,CW
                    >> 7200=END
                    >>
                    >>
                    >> 73,
                    >>
                    >> Robert PE1CWU
                    >>
                    >> --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@...> wrote:
                    >>>
                    >>> The one that I need is IARU region 1 but I tried this with several
                    >>> regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
                    >>> mtr as well.
                    >>>
                    >>> 73,
                    >>>
                    >>> Robert
                    >>>
                    >>> --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@> wrote:
                    >>> >
                    >>> > Hi Robert,
                    >>> >
                    >>> > Maybe you edited the wrong plan, not the one you have selected in
                    >> Band
                    >>> > Master?
                    >>> >
                    >>> > 73 Alex VE3NEA
                    >>> >
                    >>> >
                    >>> > ----- Original Message -----
                    >>> >
                    >>> > Hi Alex,
                    >>> >
                    >>> > I tried to edit bandplan.ini and was successful for the 80M band. But
                    >>> > when I tried to change the 40M is wasn't successful, the data dit not
                    >>> > change in bandplan. I tried to set the end at 7200 for 40Mtr en
                    >>> > reduced the end of 80Mtr at 3800
                    >>> > Any clues?
                    >>> >
                    >>> > 73,
                    >>> >
                    >>> > Robert PE1CWU
                    >>> >
                    >>>
                    >>
                    >>
                    >>
                    >>
                    >
                    >
                  • Geoff Anderson
                    Hi Alex So when are you going to add the much needed facility then? :-) I would have thought that the avid DXer and SO2R operator would have wanted this.
                    Message 9 of 15 , Feb 18, 2009
                    • 0 Attachment
                      Hi Alex

                      So when are you going to add the much needed facility then? :-)

                      I would have thought that the avid DXer and SO2R operator would have wanted
                      this. Also it would be nice for those using the 3KHz option to have
                      separated left and right channel outputs or at least have the option of
                      setting which channel to have the output fed to the soundcard

                      Something for you to think about..

                      73 de Geoff
                      G3NPA
                      Geoff.Anderson@...


                      ----- Original Message -----
                      From: "Alex, VE3NEA" <alshovk@...>
                      To: <dxatlas_group@yahoogroups.com>
                      Sent: Thursday, February 19, 2009 12:43 AM
                      Subject: Re: [dxatlas] BandPlan.ini


                      > Hi Geoff,
                      >
                      > You can do this only via the Settings dialog.
                      >
                      > 73 Alex VE3NEA
                      >
                      >
                      >
                      > ----- Original Message -----
                      > From: "Geoff Anderson" <Geoff.Anderson@...>
                      > To: <dxatlas_group@yahoogroups.com>
                      > Sent: Wednesday, February 18, 2009 07:35 PM
                      > Subject: Re: [dxatlas] BandPlan.ini
                      >
                      >
                      >> Alex,
                      >>
                      >> I may well have asked this before but have forgotten the answer.
                      >> CWSkimmer - Is it possible to change between the two radios I have set up
                      >> in Skimmer from an external source/signal and if so how is it done
                      >> please?
                      >> Changeover between my two rigs is by using an MK2R+ and a control signal
                      >> sent from Logger32 so how do I get Skimmer to follow please?
                      >>
                      >> 73 de Geoff
                      >> G3NPA
                      >> Geoff.Anderson@...
                      >>
                      >>
                      >> ----- Original Message -----
                      >> From: "Alex, VE3NEA" <alshovk@...>
                      >> To: <dxatlas_group@yahoogroups.com>
                      >> Sent: Thursday, February 19, 2009 12:29 AM
                      >> Subject: Re: [dxatlas] BandPlan.ini
                      >>
                      >>
                      >>> Robert ,
                      >>>
                      >>> I loaded your bandplan in Band Master, and it worked exactly as you
                      >>> defined
                      >>> it - the 40 m band ended at 7200. Make sure that you are not editing the
                      >>> old
                      >>> bandplan.ini file in the BandMaster folder, that file is no longer used.
                      >>>
                      >>> 73 Alex VE3NEA
                      >>>
                      >>>
                      >>>
                      >>>
                      >>> ----- Original Message -----
                      >>> From: "rdvrey" <rdvrey@...>
                      >>> To: <dxatlas_group@yahoogroups.com>
                      >>> Sent: Wednesday, February 18, 2009 07:03 PM
                      >>> Subject: Re: [dxatlas] BandPlan.ini
                      >>>
                      >>>
                      >>> Hi Alex,
                      >>>
                      >>> example:
                      >>> [IARU Region 1]
                      >>> 1810=CW
                      >>> 1838=DIG,CW
                      >>> 1840=DIG,PH,CW
                      >>> 1842=PH,CW
                      >>> 1880=END
                      >>>
                      >>> 3500=CW-DX,CW-contest
                      >>> 3510=CW-contest
                      >>> 3560=CW
                      >>> 3580=DIG,CW
                      >>> 3600=DIG,PH-contest,CW
                      >>> 3620=PH-contest,CW
                      >>> 3650=PH,CW
                      >>> 3700=PH-contest,CW
                      >>> 3730=PH-contest,SSTV,CW
                      >>> 3740=PH-contest,CW
                      >>> 3775=PH-DX,PH-contest
                      >>> 3800=END
                      >>>
                      >>> 7000=CW
                      >>> 7030=DIG,CW,SSTV
                      >>> 7045=DIG,PH,CW
                      >>> 7100=PH,CW
                      >>> 7200=END
                      >>>
                      >>>
                      >>> 73,
                      >>>
                      >>> Robert PE1CWU
                      >>>
                      >>> --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@...> wrote:
                      >>>>
                      >>>> The one that I need is IARU region 1 but I tried this with several
                      >>>> regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
                      >>>> mtr as well.
                      >>>>
                      >>>> 73,
                      >>>>
                      >>>> Robert
                      >>>>
                      >>>> --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@> wrote:
                      >>>> >
                      >>>> > Hi Robert,
                      >>>> >
                      >>>> > Maybe you edited the wrong plan, not the one you have selected in
                      >>> Band
                      >>>> > Master?
                      >>>> >
                      >>>> > 73 Alex VE3NEA
                      >>>> >
                      >>>> >
                      >>>> > ----- Original Message -----
                      >>>> >
                      >>>> > Hi Alex,
                      >>>> >
                      >>>> > I tried to edit bandplan.ini and was successful for the 80M band. But
                      >>>> > when I tried to change the 40M is wasn't successful, the data dit not
                      >>>> > change in bandplan. I tried to set the end at 7200 for 40Mtr en
                      >>>> > reduced the end of 80Mtr at 3800
                      >>>> > Any clues?
                      >>>> >
                      >>>> > 73,
                      >>>> >
                      >>>> > Robert PE1CWU
                      >>>> >
                      >>>>
                      >>>
                      >>>
                      >>>
                      >>>
                      >>
                      >>
                      >
                      >
                    • Pete Smith
                      As a possible workaround -- my Skimmer is on a separate computer on my wireless network, so I use the SKIMMER/QSY command to change bands with the SDR-IQ
                      Message 10 of 15 , Feb 19, 2009
                      • 0 Attachment
                        As a possible workaround -- my Skimmer is on a separate computer on my
                        wireless network, so I use the SKIMMER/QSY command to change bands with the
                        SDR-IQ receiver, and program those commands in the Telnet window of my
                        logging software. The button labeled SK 40 sends my SDR-IQ to 7036. That
                        doesn't QSY the antenna Skimmer uses, of course, but my normal operating
                        approach is to run Skimmer off the RX antenna of my second radio (behind
                        its bandpass filters as well).

                        I don't think Skimmer will change the center frequency in SoftRock mode, in
                        response to a Skimmer/QSY command - just the main decoder frequency. Do I
                        have that right, Alex?

                        Does the world need a new piece of software that will listen to your
                        Ethernet network, recognize various control signals and mediate between
                        them, then control user-configured "boxes" such as radios, band decoders,
                        etc.? I'm sure it would be pretty elaborate, and might not even be
                        possible without additional hardware.

                        73, Pete N4ZR

                        At 08:03 PM 2/18/2009, Geoff Anderson wrote:
                        >Hi Alex
                        >
                        >So when are you going to add the much needed facility then? :-)
                        >
                        >I would have thought that the avid DXer and SO2R operator would have wanted
                        >this. Also it would be nice for those using the 3KHz option to have
                        >separated left and right channel outputs or at least have the option of
                        >setting which channel to have the output fed to the soundcard
                        >
                        >Something for you to think about..
                        >
                        >73 de Geoff
                        >G3NPA
                        >Geoff.Anderson@...
                        >
                        >
                        >----- Original Message -----
                        >From: "Alex, VE3NEA" <alshovk@...>
                        >To: <dxatlas_group@yahoogroups.com>
                        >Sent: Thursday, February 19, 2009 12:43 AM
                        >Subject: Re: [dxatlas] BandPlan.ini
                        >
                        >
                        > > Hi Geoff,
                        > >
                        > > You can do this only via the Settings dialog.
                        > >
                        > > 73 Alex VE3NEA
                        > >
                        > >
                        > >
                        > > ----- Original Message -----
                        > > From: "Geoff Anderson" <Geoff.Anderson@...>
                        > > To: <dxatlas_group@yahoogroups.com>
                        > > Sent: Wednesday, February 18, 2009 07:35 PM
                        > > Subject: Re: [dxatlas] BandPlan.ini
                        > >
                        > >
                        > >> Alex,
                        > >>
                        > >> I may well have asked this before but have forgotten the answer.
                        > >> CWSkimmer - Is it possible to change between the two radios I have set up
                        > >> in Skimmer from an external source/signal and if so how is it done
                        > >> please?
                        > >> Changeover between my two rigs is by using an MK2R+ and a control signal
                        > >> sent from Logger32 so how do I get Skimmer to follow please?
                        > >>
                        > >> 73 de Geoff
                        > >> G3NPA
                        > >> Geoff.Anderson@...
                        > >>
                        > >>
                        > >> ----- Original Message -----
                        > >> From: "Alex, VE3NEA" <alshovk@...>
                        > >> To: <dxatlas_group@yahoogroups.com>
                        > >> Sent: Thursday, February 19, 2009 12:29 AM
                        > >> Subject: Re: [dxatlas] BandPlan.ini
                        > >>
                        > >>
                        > >>> Robert ,
                        > >>>
                        > >>> I loaded your bandplan in Band Master, and it worked exactly as you
                        > >>> defined
                        > >>> it - the 40 m band ended at 7200. Make sure that you are not editing the
                        > >>> old
                        > >>> bandplan.ini file in the BandMaster folder, that file is no longer used.
                        > >>>
                        > >>> 73 Alex VE3NEA
                        > >>>
                        > >>>
                        > >>>
                        > >>>
                        > >>> ----- Original Message -----
                        > >>> From: "rdvrey" <rdvrey@...>
                        > >>> To: <dxatlas_group@yahoogroups.com>
                        > >>> Sent: Wednesday, February 18, 2009 07:03 PM
                        > >>> Subject: Re: [dxatlas] BandPlan.ini
                        > >>>
                        > >>>
                        > >>> Hi Alex,
                        > >>>
                        > >>> example:
                        > >>> [IARU Region 1]
                        > >>> 1810=CW
                        > >>> 1838=DIG,CW
                        > >>> 1840=DIG,PH,CW
                        > >>> 1842=PH,CW
                        > >>> 1880=END
                        > >>>
                        > >>> 3500=CW-DX,CW-contest
                        > >>> 3510=CW-contest
                        > >>> 3560=CW
                        > >>> 3580=DIG,CW
                        > >>> 3600=DIG,PH-contest,CW
                        > >>> 3620=PH-contest,CW
                        > >>> 3650=PH,CW
                        > >>> 3700=PH-contest,CW
                        > >>> 3730=PH-contest,SSTV,CW
                        > >>> 3740=PH-contest,CW
                        > >>> 3775=PH-DX,PH-contest
                        > >>> 3800=END
                        > >>>
                        > >>> 7000=CW
                        > >>> 7030=DIG,CW,SSTV
                        > >>> 7045=DIG,PH,CW
                        > >>> 7100=PH,CW
                        > >>> 7200=END
                        > >>>
                        > >>>
                        > >>> 73,
                        > >>>
                        > >>> Robert PE1CWU
                        > >>>
                        > >>> --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@...> wrote:
                        > >>>>
                        > >>>> The one that I need is IARU region 1 but I tried this with several
                        > >>>> regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
                        > >>>> mtr as well.
                        > >>>>
                        > >>>> 73,
                        > >>>>
                        > >>>> Robert
                        > >>>>
                        > >>>> --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@> wrote:
                        > >>>> >
                        > >>>> > Hi Robert,
                        > >>>> >
                        > >>>> > Maybe you edited the wrong plan, not the one you have selected in
                        > >>> Band
                        > >>>> > Master?
                        > >>>> >
                        > >>>> > 73 Alex VE3NEA
                        > >>>> >
                        > >>>> >
                        > >>>> > ----- Original Message -----
                        > >>>> >
                        > >>>> > Hi Alex,
                        > >>>> >
                        > >>>> > I tried to edit bandplan.ini and was successful for the 80M band. But
                        > >>>> > when I tried to change the 40M is wasn't successful, the data dit not
                        > >>>> > change in bandplan. I tried to set the end at 7200 for 40Mtr en
                        > >>>> > reduced the end of 80Mtr at 3800
                        > >>>> > Any clues?
                        > >>>> >
                        > >>>> > 73,
                        > >>>> >
                        > >>>> > Robert PE1CWU
                        > >>>> >
                        > >>>>
                        > >>>
                        > >>>
                        > >>>
                        > >>>
                        > >>
                        > >>
                        > >
                        > >
                        >
                        >
                        >
                        >------------------------------------
                        >
                        >Yahoo! Groups Links
                        >
                        >
                        >
                      Your message has been successfully submitted and would be delivered to recipients shortly.