Re: Eterlogic Serial Port Splitter with Wintest
- Hi Toby,
I do not use WinTest so I cannot give a direct answer. If you
suspect that the problem is with the Eterlogic VSPE then I suggest
that you go to their website where you will find a support forum.
Posting questions there always results in a very fast response. If
VSPE is the problem they will try to fix it. Some bug fixes are
done within a few hours!
73 de Barry GM3YEH.
--- In email@example.com, "Tobias Wellnitz"
> everybody is working with Eterlogic Serial Port Splitter for cw-
> win-test ?which is a
> n1mm + cw-skimmer work well.
> Win-Test however is continously jumping between VFO1 and VFO2
> little bit annoying.[mailto:firstname.lastname@example.org] Im
> Anybody knows a workaround ?
> 73, Toby
> Von: email@example.com
> Auftrag von Barry GM3YEHfrom
> Gesendet: Dienstag, 8. Juli 2008 20:09
> An: firstname.lastname@example.org
> Betreff: [dxatlas] Re: Eterlogic Serial Port Splitter - Correction
> No such QRG pass problems noted here Pete. I have seen the N1MM
> exit hang you mention though.
> 73 de Barry GM3YEH.
> --- In dxatlas_group@ <mailto:dxatlas_group%40yahoogroups.com>
> yahoogroups.com, Pete Smith <n4zr@> wrote:
> > Looks like I spoke too soon in endorsing the Eterlogic virtual
> serial port
> > emulator. I have done some further tests and for some reason am
> > getting very flakey frequency data passed to CW Skimmer when
> > between Skimmer and N1MM Logger. Even without tuning either
> radio, the
> > frequency passed to Skimmer switches every couple of seconds
> > correct radio frequency to two totally off-the-wall numbers -
> clearly bad
> > data being received by Skimmer. I don't know why I didn't see
> this before,
> > but it will be a show-stopper unless there is some cure. I've
> > discovered that MM won't close when Skimmer is closed first,
> > the VSPE - annoying but not fatal, like the other thing.
> > oh well.....
> > 73, Pete N4ZR
> [Non-text portions of this message have been removed]