Loading ...
Sorry, an error occurred while loading the content.

87Re: [dxatlas] OmniRig/HamPortOmniRig/Bandmaster with older Icom

Expand Messages
  • L. Sica
    Sep 12, 2004
    • 0 Attachment
      Hello Alex (and group)

      I've downloaded it, I have DTR and RTS set to high, and I have Transceive mode set to "off" on the Icom. I'm still running into some problems

      1) I can set frequency with Hamport OmniRig, but having the program respond to frequency has a short (1/2 to one second) delay. My poll rate is set to 100ms, my timeout to 4000ms.
      2) I can set mode with HamPort OmniRig, but the program never displays the mode of the radio.

      And oddly enough, I get the SAME response whether Transcieve mode is set to "on" or "off". Because of this, and because I did have to manually fix the "rig" file, I'd like to ask if anyone else has got an older Icom rig to work with the Omni Rig engine? Is my rig file incorrect? Is "transcieve mode" not working properly in my rig?

      ----- Original Message -----
      From: Alex, VE3NEA
      To: dxatlas_group@yahoogroups.com
      Sent: Sunday, September 12, 2004 8:44 AM
      Subject: Re: [dxatlas] OmniRig/HamPortOmniRig/Bandmaster with older Icom

      Hi Lou,

      Please download and install OmniRig 1.2, and set DTR and RTS to High in the
      RIG 1 Settings dialog. Also, make sure that CI-V Transceive is disabled in
      your rig.

      73 Alex VE3NEA

      > Hello group(s)
      > Has anyone on these groups interfaced a program with the Omni Rig Engine
      > an older Icom with an LCU-3 interface, specifically an IC-761? I'm having
      > problems making mine work.
      > Thanks to all

      Yahoo! Groups Sponsor

      Yahoo! Groups Links

      a.. To visit your group on the web, go to:

      b.. To unsubscribe from this group, send an email to:

      c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

      [Non-text portions of this message have been removed]
    • Show all 3 messages in this topic