Loading ...
Sorry, an error occurred while loading the content.

1932[dxatlas] Re: Editing Skimmer WAV Files?

Expand Messages
  • jmaass_moose
    May 2, 2010
      Thanks, Alex! That's solved it.

      I'm assembling a few download-friendly-length extracts from some PJ2T logs from the 2009 CQWW 160 CW Contest. It's pretty jaw-dropping to watch the callsigns decoding from the target-rich environment (~800 decoders, 230 callsigns spotted under "paranoid" filter in an hours time). That's even with the PJ2T transmitter mucking up the receiver while running a pileup!

      73, Jeff

      --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@...> wrote:
      > Hi Jeff,
      > The center frequency, UTC date/time and other parameters of the recording
      > are stored in the WAV headers. If you save a fragment of a recording in a
      > new file, you can add the missing headers manually using the WavInfo tool
      > available at (www.dxatlas.com/cwskimmer/files/wavinfo.zip). You can run two
      > instances of this tool, open the original file in the first instance and the
      > new file in the second instance, and copy-and-paste the headers.
      > I believe many general purpose wav editors also have commands for editing
      > the info headers.
      > 73 Alex VE3NEA
      > ----- Original Message -----
      > Editing the CW Skimmer WAV files does not seem to work with an audio editing
      > tool. I sliced off all but the first 10 minutes of the file, and played it
      > back using CW Skimmer. It decodes the callsigns, but the absolute frequency
      > information is lost. It plots against an offset rather than the absolute
      > frequencey captured.
      > The unedited original ~1 hour file decodes as expected.
      > Any guidance how I can slice off a ten minute period of a large captured WC
      > Skimmer WAV file without losing any information?
      > 73, Jeff K8ND
    • Show all 6 messages in this topic