Loading ...
Sorry, an error occurred while loading the content.

1688Re: [dxatlas] etting adjustment ?/ Zero beat

Expand Messages
  • Pete Smith
    Jan 10, 2010
    • 0 Attachment
      You will find that when running a separate radio Skimmer can be set up
      to control your radio, such that when you move the green demodulator box
      onto a signal stream, it will send the frequency of that stream to your
      radio. The streams are only 50 Hz wide, so that is plenty tight. The
      secret is an application by Ed, W2RF, called Rigsync. It is freeware
      and you can easily Google for the download. It is a little tricky to
      set up, but once it's done, it's great.

      73, Pete N4ZR
      Visit the Contesting Compendium at http://wiki.contesting.com
      The World Contest Station Database, updated daily at www.conteststations.com
      The Reverse Beacon Network at http://reversebeacon.net


      On 1/10/2010 12:10 PM, obrienaj wrote:
      > Today, with my TS-2000. Hopefully with SDR in middle of enxt week, when it arrives.
      >
      > I just read your guide at http://www.dxatlas.com/CwSkimmer/Files/Skimmerintro.pdf
      >
      > and have found it very useful, thanks. I have decoding improvements already.
      >
      >
      > Next issue... zero beating. When the rig is set to WIDE filter for Skimmer use.. how are Skimmer users ensuring that they are zero beat for a "tight" transmit ? Do we do it the old fashioned way or are their Skimmer tricks?
      >
      > Andy K3Uk
      >
      > --- In dxatlas_group@yahoogroups.com, Pete Smith<n4zr@...> wrote:
      >
      >> Andy, are you using it with an SDR or with audio from your receiver? If
      >> with audio, have you checked for the possibility that the audio level is
      >> too high?
      >>
      >> For a second or two after you QSY the green zone (the audio bandpass),
      >> you will see very bad decoding on that stream, but if you let things sit
      >> still it quickly cleans up. You don't have to move the green zone to
      >> get decoding, except in the lower decoder window. Point your mouse
      >> cursor to an active decoder, and you will see what has been decoded
      >> there recently. Keep in mind that Skimmer is not primarily a CW
      >> decoder, so the user interface is optimized for different purposes - to
      >> find, decode, and identify stations across a wide bandpass.
      >>
      >> My SkimmerServer was decoding ~1800 spots per 30 minutes during the NAQP
      >> yesterday - pretty amazing. No, I wasn't using it during the contest,
      >> but rather testing for CPU load - that was using about 30 percent of the
      >> CPU of my small dual-core Pentium.
      >>
      >> 73, Pete N4ZR
      >> Visit the Contesting Compendium at http://wiki.contesting.com
      >> The World Contest Station Database, updated daily at www.conteststations.com
      >> The Reverse Beacon Network at http://reversebeacon.net
      >>
      >>
      >> On 1/10/2010 11:19 AM, obrienaj wrote:
      >>
      >>> I have 21 days left on my trial. I have seen how well CW Skimmer seems to perform for others via my call being reflected back on the reverse beacon network. I have also read many comments about just how well it decodes CW. Perhaps I am missing something in the settings ...because I find the decode capability to be fairly poor , compared to some other decoding applications.
      >>>
      >>> Since the claim of good CW Skimmer performance is made by many respected hams , I have to assume it is not the software . Is there a squelch-type setting that I am missing and need to set up ? Maybe it is just bad fists that I am encountering this weekend.
      >>>
      >>> I am not expecting it to decode a rag-chew, just spot a few CQs and callsigns.
      >>>
      >>> Andy K3UK
      >>>
      >>>
      >>>
      >>> ------------------------------------
      >>>
      >>> Yahoo! Groups Links
      >>>
      >>>
      >>>
      >>>
      >>>
      >>>
      >
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >


      [Non-text portions of this message have been removed]
    • Show all 8 messages in this topic