Loading ...
Sorry, an error occurred while loading the content.

1354Re: [dxatlas] BandPlan.ini

Expand Messages
  • Geoff Anderson
    Feb 18, 2009
    • 0 Attachment
      Hi Alex

      So when are you going to add the much needed facility then? :-)

      I would have thought that the avid DXer and SO2R operator would have wanted
      this. Also it would be nice for those using the 3KHz option to have
      separated left and right channel outputs or at least have the option of
      setting which channel to have the output fed to the soundcard

      Something for you to think about..

      73 de Geoff
      G3NPA
      Geoff.Anderson@...


      ----- Original Message -----
      From: "Alex, VE3NEA" <alshovk@...>
      To: <dxatlas_group@yahoogroups.com>
      Sent: Thursday, February 19, 2009 12:43 AM
      Subject: Re: [dxatlas] BandPlan.ini


      > Hi Geoff,
      >
      > You can do this only via the Settings dialog.
      >
      > 73 Alex VE3NEA
      >
      >
      >
      > ----- Original Message -----
      > From: "Geoff Anderson" <Geoff.Anderson@...>
      > To: <dxatlas_group@yahoogroups.com>
      > Sent: Wednesday, February 18, 2009 07:35 PM
      > Subject: Re: [dxatlas] BandPlan.ini
      >
      >
      >> Alex,
      >>
      >> I may well have asked this before but have forgotten the answer.
      >> CWSkimmer - Is it possible to change between the two radios I have set up
      >> in Skimmer from an external source/signal and if so how is it done
      >> please?
      >> Changeover between my two rigs is by using an MK2R+ and a control signal
      >> sent from Logger32 so how do I get Skimmer to follow please?
      >>
      >> 73 de Geoff
      >> G3NPA
      >> Geoff.Anderson@...
      >>
      >>
      >> ----- Original Message -----
      >> From: "Alex, VE3NEA" <alshovk@...>
      >> To: <dxatlas_group@yahoogroups.com>
      >> Sent: Thursday, February 19, 2009 12:29 AM
      >> Subject: Re: [dxatlas] BandPlan.ini
      >>
      >>
      >>> Robert ,
      >>>
      >>> I loaded your bandplan in Band Master, and it worked exactly as you
      >>> defined
      >>> it - the 40 m band ended at 7200. Make sure that you are not editing the
      >>> old
      >>> bandplan.ini file in the BandMaster folder, that file is no longer used.
      >>>
      >>> 73 Alex VE3NEA
      >>>
      >>>
      >>>
      >>>
      >>> ----- Original Message -----
      >>> From: "rdvrey" <rdvrey@...>
      >>> To: <dxatlas_group@yahoogroups.com>
      >>> Sent: Wednesday, February 18, 2009 07:03 PM
      >>> Subject: Re: [dxatlas] BandPlan.ini
      >>>
      >>>
      >>> Hi Alex,
      >>>
      >>> example:
      >>> [IARU Region 1]
      >>> 1810=CW
      >>> 1838=DIG,CW
      >>> 1840=DIG,PH,CW
      >>> 1842=PH,CW
      >>> 1880=END
      >>>
      >>> 3500=CW-DX,CW-contest
      >>> 3510=CW-contest
      >>> 3560=CW
      >>> 3580=DIG,CW
      >>> 3600=DIG,PH-contest,CW
      >>> 3620=PH-contest,CW
      >>> 3650=PH,CW
      >>> 3700=PH-contest,CW
      >>> 3730=PH-contest,SSTV,CW
      >>> 3740=PH-contest,CW
      >>> 3775=PH-DX,PH-contest
      >>> 3800=END
      >>>
      >>> 7000=CW
      >>> 7030=DIG,CW,SSTV
      >>> 7045=DIG,PH,CW
      >>> 7100=PH,CW
      >>> 7200=END
      >>>
      >>>
      >>> 73,
      >>>
      >>> Robert PE1CWU
      >>>
      >>> --- In dxatlas_group@yahoogroups.com, "rdvrey" <rdvrey@...> wrote:
      >>>>
      >>>> The one that I need is IARU region 1 but I tried this with several
      >>>> regions. I wasn't able to reduce the bandwidth in IARU REGION 2 for 40
      >>>> mtr as well.
      >>>>
      >>>> 73,
      >>>>
      >>>> Robert
      >>>>
      >>>> --- In dxatlas_group@yahoogroups.com, "Alex, VE3NEA" <alshovk@> wrote:
      >>>> >
      >>>> > Hi Robert,
      >>>> >
      >>>> > Maybe you edited the wrong plan, not the one you have selected in
      >>> Band
      >>>> > Master?
      >>>> >
      >>>> > 73 Alex VE3NEA
      >>>> >
      >>>> >
      >>>> > ----- Original Message -----
      >>>> >
      >>>> > Hi Alex,
      >>>> >
      >>>> > I tried to edit bandplan.ini and was successful for the 80M band. But
      >>>> > when I tried to change the 40M is wasn't successful, the data dit not
      >>>> > change in bandplan. I tried to set the end at 7200 for 40Mtr en
      >>>> > reduced the end of 80Mtr at 3800
      >>>> > Any clues?
      >>>> >
      >>>> > 73,
      >>>> >
      >>>> > Robert PE1CWU
      >>>> >
      >>>>
      >>>
      >>>
      >>>
      >>>
      >>
      >>
      >
      >
    • Show all 15 messages in this topic