Loading ...
Sorry, an error occurred while loading the content.

GUI Issue.

Expand Messages
  • korey_sherwin
    The GUI seems to be showing the incorrect setting of the Native / Legacy Switch. It shows Native mode when the card is physically switched to Legacy , and
    Message 1 of 2 , Apr 2, 2012
    • 0 Attachment
      The GUI seems to be showing the incorrect setting of the Native / Legacy Switch.

      It shows "Native" mode when the card is physically switched to "Legacy", and "Legacy" when switched to "Native" mode.

      Seems the GUI is out of Phase! 

      Tested on both Windows XP and OSX 10.6.8.


      M7CL - V3.55
      CP-J - 2.08
      MY16 Firmware - V1.06
      Card # 00251
    • Sam Wong
      Hmmm, that used to work. I ll have it fixed. Thanks. Sam. From: duganusers@yahoogroups.com [mailto:duganusers@yahoogroups.com] On Behalf Of korey_sherwin Sent:
      Message 2 of 2 , Apr 3, 2012
      • 0 Attachment

        Hmmm, that used to work. I’ll have it fixed.

         

        Thanks.

        Sam.

         

        From: duganusers@yahoogroups.com [mailto:duganusers@yahoogroups.com] On Behalf Of korey_sherwin
        Sent: Monday, April 02, 2012 10:18 PM
        To: duganusers@yahoogroups.com
        Subject: [duganusers] GUI Issue.

         

         

        The GUI seems to be showing the incorrect setting of the Native / Legacy Switch.

         

        It shows "Native" mode when the card is physically switched to "Legacy", and "Legacy" when switched to "Native" mode.

         

        Seems the GUI is out of Phase! 

         

        Tested on both Windows XP and OSX 10.6.8.

         

         

        M7CL - V3.55

        CP-J - 2.08

        MY16 Firmware - V1.06

        Card # 00251

      Your message has been successfully submitted and would be delivered to recipients shortly.