Loading ...
Sorry, an error occurred while loading the content.

Re: [diy_3d_printing_and_fabrication] Asiga LED realtime resin curing video

Expand Messages
  • Robert Grauman
    From: Torben Mogensen Sent: Friday, March 08, 2013 8:31 AM To: diy_3d_printing_and_fabrication@yahoogroups.com Subject: Re: [diy_3d_printing_and_fabrication]
    Message 1 of 18 , Mar 9, 2013
    • 0 Attachment
       
       
      Sent: Friday, March 08, 2013 8:31 AM
      Subject: Re: [diy_3d_printing_and_fabrication] Asiga LED realtime resin curing video
       


      Hi Peter - very nice find.
       
      Much more like it :-)
       
      Exposure <1 sec. - Z movement 5-6 sec.
      I'm aiming for 2 sec. in Z movement.
      150mm print height @ 0.15mm in <50 min. that is going to make a real difference
       
       


      On Fri, Mar 8, 2013 at 5:16 AM, pzamov <pzamov@...> wrote:
       

      @Group,
      While researching the speed that LED projectors cure resin:

      http://www.youtube.com/watch?v=ScT8iPKC7Og#!

      It is interesting to see the actual speed of the printer.
      It is possible and fast to cure with an LED. The resins need to be reformulated a bit.

      Cheers!
      Peter

      No virus found in this message.
      Checked by AVG - www.avg.com
      Version: 2012.0.2240 / Virus Database: 2641/5655 - Release Date: 03/07/13

    Your message has been successfully submitted and would be delivered to recipients shortly.