Loading ...
Sorry, an error occurred while loading the content.
 

The weird and wonderful

Expand Messages
  • Francis
    Guys Check out this for 3D printing using industrial robot 0.25 build layer ? http://vimeo.com/49888105 There is no tilting obvious in the machine. I am not
    Message 1 of 3 , Feb 28, 2013
      Guys

      Check out this for 3D printing using industrial robot

      0.25" build layer ?

      http://vimeo.com/49888105

      There is no tilting obvious in the machine.

      I am not promoting this as a viable solution but food for thought

      Regards


      Francis
    • Graham Stabler
      I might be wrong but I think the guy who did this actually posted about it last year, there may be some more info in the archive. It is certainly very
      Message 2 of 3 , Feb 28, 2013
        I might be wrong but I think the guy who did this actually posted about it last year, there may be some more info in the archive. It is certainly very interesting!

        Graham


        On Thu, Feb 28, 2013 at 4:51 PM, Francis <francisleach@...> wrote:
         

        Guys

        Check out this for 3D printing using industrial robot

        0.25" build layer ?

        http://vimeo.com/49888105

        There is no tilting obvious in the machine.

        I am not promoting this as a viable solution but food for thought

        Regards

        Francis


      • arthur2shedsj
        ... http://tech.groups.yahoo.com/group/diy_3d_printing_and_fabrication/message/7295 Staubli robots and the old ZVE500 formula. Sylgard vat with tilt.
        Message 3 of 3 , Feb 28, 2013
          --- In diy_3d_printing_and_fabrication@yahoogroups.com, Graham Stabler <grezmos@...> wrote:
          >
          > I might be wrong but I think the guy who did this actually posted about it
          > last year, there may be some more info in the archive. It is certainly very
          > interesting!

          http://tech.groups.yahoo.com/group/diy_3d_printing_and_fabrication/message/7295

          Staubli robots and the old ZVE500 formula. Sylgard vat with tilt.
        Your message has been successfully submitted and would be delivered to recipients shortly.