Loading ...
Sorry, an error occurred while loading the content.

ultrasound mixer

Expand Messages
  • afogassa
    just another thought
    Message 1 of 11 , Feb 17, 2013
    • 0 Attachment
      just another thought
    • afogassa
      maybe 4 piezo inside the edges of the vat then a ultra sound generator would keep the resin moving around without the need of pumps.
      Message 2 of 11 , Feb 17, 2013
      • 0 Attachment
        maybe 4 piezo inside the edges of the vat then a ultra sound generator would keep the resin moving around without the need of pumps.

        --- In diy_3d_printing_and_fabrication@yahoogroups.com, "afogassa" <afogassa@...> wrote:
        >
        > just another thought
        >
      • Graham
        Ultrasonic baths certainly disperse particles in suspension so might be worth a try. Or some other agitator within the bath. Graham
        Message 3 of 11 , Feb 17, 2013
        • 0 Attachment
          Ultrasonic baths certainly disperse particles in suspension so might be worth a try. Or some other agitator within the bath.

          Graham



          On 17 Feb 2013, at 22:39, "afogassa" <afogassa@...> wrote:

           

          maybe 4 piezo inside the edges of the vat then a ultra sound generator would keep the resin moving around without the need of pumps.

          --- In diy_3d_printing_and_fabrication@yahoogroups.com, "afogassa" wrote:
          >
          > just another thought
          >

        • Benjamin Mahony
          We (my company) have just purchased a wide format flatbed uv resin printer, ie poster printer, though can print a little bit 3d, textures and embossed text etc
          Message 4 of 11 , Feb 17, 2013
          • 0 Attachment
            We (my company) have just purchased a wide format flatbed uv resin printer, ie poster printer, though can print a little bit 3d, textures and embossed text etc by printing multiple layers.   It uses 6 colours plus White and clear varnish.  White UV inks are always an issue in printing industry because the white pigments settle out of the resin.  So some manufactures use a recirculating ink supply for the white ink to try.   Ours uses a one way supply but uses ultra sonic vibrates on the head tank and filter and a rocking motion on the bulk tank to try and combat the problem.
            Don't know how well it works yet...

            Ben M


            On 18/02/2013 9:39 AM, afogassa wrote:
             

            maybe 4 piezo inside the edges of the vat then a ultra sound generator would keep the resin moving around without the need of pumps.

            --- In diy_3d_printing_and_fabrication@yahoogroups.com, "afogassa" wrote:
            >
            > just another thought
            >


          • Fortino
            This is a brilliant idea. How to make sure it does not affect the curing resin? Do you propose to turn it on and off? Fortino? Sent from my iPad
            Message 5 of 11 , Feb 17, 2013
            • 0 Attachment
              This is a brilliant idea. How to make sure it does not affect the curing resin?
              Do you propose to turn it on and off?

              Fortino?

              Sent from my iPad

              On 18 Feb 2013, at 05:39, "afogassa" <afogassa@...> wrote:

               

              maybe 4 piezo inside the edges of the vat then a ultra sound generator would keep the resin moving around without the need of pumps.

              --- In diy_3d_printing_and_fabrication@yahoogroups.com, "afogassa" wrote:
              >
              > just another thought
              >

            • afogassa
              it would be off when projecting. don´t know how the resin would react to it thou. I´ve seeing some water oil blending being done with ultrasound maybe it can
              Message 6 of 11 , Feb 17, 2013
              • 0 Attachment
                it would be off when projecting. don´t know how the resin would react to it thou.
                I´ve seeing some water oil blending being done with ultrasound maybe it can keep the pigment well mixed in the resin.
                there are some cheap facial cleaning ultrasound stuff on ebay.
                another idea is to use a couple pager motors to vibrate the glass.

                --- In diy_3d_printing_and_fabrication@yahoogroups.com, Fortino <jolly_craft@...> wrote:
                >
                > This is a brilliant idea. How to make sure it does not affect the curing resin?
                > Do you propose to turn it on and off?
                >
                > Fortino?
                >
                > Sent from my iPad
                >
                > On 18 Feb 2013, at 05:39, "afogassa" <afogassa@...> wrote:
                >
                > > maybe 4 piezo inside the edges of the vat then a ultra sound generator would keep the resin moving around without the need of pumps.
                > >
                > > --- In diy_3d_printing_and_fabrication@yahoogroups.com, "afogassa" wrote:
                > > >
                > > > just another thought
                > > >
                > >
                > >
                >
              • Graham Stabler
                Or vibrate some paddles suspended in the resin. Or what about a frame (square with square cut out) sitting in the tank at the bottom around the build area,
                Message 7 of 11 , Feb 18, 2013
                • 0 Attachment
                  Or vibrate some paddles suspended in the resin. Or what about a frame (square with square cut out) sitting in the tank at the bottom around the build area, lifting this up and down would cause resin to be sucked under and then pushed out disturbing it?

                  One general issue with using pumps to mix might be that you end up with areas with less flow and therefore a build up, like silt in a river. An ultrasonic mixer may be just the thing, no where for the resin to hide?

                  Graham



                  On Mon, Feb 18, 2013 at 12:35 AM, afogassa <afogassa@...> wrote:
                   

                  it would be off when projecting. don´t know how the resin would react to it thou.
                  I´ve seeing some water oil blending being done with ultrasound maybe it can keep the pigment well mixed in the resin.
                  there are some cheap facial cleaning ultrasound stuff on ebay.
                  another idea is to use a couple pager motors to vibrate the glass.


                • afogassa
                  maybe you are right, i´ve being thinking about and i think a vibration system might work better then pumps. i just need to shake things up. A pump would
                  Message 8 of 11 , Feb 18, 2013
                  • 0 Attachment
                    maybe you are right, i´ve being thinking about and i think a vibration system might work better then pumps. i just need to shake things up.
                    A pump would still have the pigment setting down at corner of the vat unless i´ve a tube running along the vat´s edge with lots of holes on it but then i mould need a powerfull pump and need extra resin to fill it up.
                    i don´t want to remove the resin from vat when i´m not using it becouse i lose some resin everytime i clean the vat and it can damage the silicon on a short time.
                    So, I think of having four motors with impellers or a single motor with a mixing arm (rc servo motor) to keep things moving when i´m not using it.my vat has a air tight top lid on it adding motors with impellers on the lid to keep it moving when i´m not using looks like a better idea.It would turn on and of maybe every 15 min. in stand by.
                    if i increase the vat return speed when printing would also keep the resin moving around and keep it well mixed during the build process.


                    --- In diy_3d_printing_and_fabrication@yahoogroups.com, Graham Stabler <grezmos@...> wrote:
                    >
                    > Or vibrate some paddles suspended in the resin. Or what about a frame
                    > (square with square cut out) sitting in the tank at the bottom around the
                    > build area, lifting this up and down would cause resin to be sucked under
                    > and then pushed out disturbing it?
                    >
                    > One general issue with using pumps to mix might be that you end up with
                    > areas with less flow and therefore a build up, like silt in a river. An
                    > ultrasonic mixer may be just the thing, no where for the resin to hide?
                    >
                    > Graham
                    >
                    >
                    >
                    > On Mon, Feb 18, 2013 at 12:35 AM, afogassa <afogassa@...> wrote:
                    >
                    > > **
                    > >
                    > >
                    > > it would be off when projecting. don´t know how the resin would react to
                    > > it thou.
                    > > I´ve seeing some water oil blending being done with ultrasound maybe it
                    > > can keep the pigment well mixed in the resin.
                    > > there are some cheap facial cleaning ultrasound stuff on ebay.
                    > > another idea is to use a couple pager motors to vibrate the glass.
                    > >
                    > >
                    >
                  • Graham Stabler
                    Magnetic stirrer fleas might be a neat way to do it. Graham ... Magnetic stirrer fleas might be a neat way to do it.  Graham On Mon, Feb 18, 2013 at 2:59
                    Message 9 of 11 , Feb 18, 2013
                    • 0 Attachment
                      Magnetic stirrer "fleas" might be a neat way to do it. 

                      Graham



                      On Mon, Feb 18, 2013 at 2:59 PM, afogassa <afogassa@...> wrote:
                       

                      maybe you are right, i´ve being thinking about and i think a vibration system might work better then pumps. i just need to shake things up.
                      A pump would still have the pigment setting down at corner of the vat unless i´ve a tube running along the vat´s edge with lots of holes on it but then i mould need a powerfull pump and need extra resin to fill it up.
                      i don´t want to remove the resin from vat when i´m not using it becouse i lose some resin everytime i clean the vat and it can damage the silicon on a short time.
                      So, I think of having four motors with impellers or a single motor with a mixing arm (rc servo motor) to keep things moving when i´m not using it.my vat has a air tight top lid on it adding motors with impellers on the lid to keep it moving when i´m not using looks like a better idea.It would turn on and of maybe every 15 min. in stand by.
                      if i increase the vat return speed when printing would also keep the resin moving around and keep it well mixed during the build process.


                      --- In diy_3d_printing_and_fabrication@yahoogroups.com, Graham Stabler wrote:
                      >
                      > Or vibrate some paddles suspended in the resin. Or what about a frame
                      > (square with square cut out) sitting in the tank at the bottom around the
                      > build area, lifting this up and down would cause resin to be sucked under
                      > and then pushed out disturbing it?
                      >
                      > One general issue with using pumps to mix might be that you end up with
                      > areas with less flow and therefore a build up, like silt in a river. An
                      > ultrasonic mixer may be just the thing, no where for the resin to hide?
                      >
                      > Graham
                      >
                      >
                      >
                      > On Mon, Feb 18, 2013 at 12:35 AM, afogassa wrote:
                      >
                      > > **

                      > >
                      > >
                      > > it would be off when projecting. don´t know how the resin would react to
                      > > it thou.
                      > > I´ve seeing some water oil blending being done with ultrasound maybe it
                      > > can keep the pigment well mixed in the resin.
                      > > there are some cheap facial cleaning ultrasound stuff on ebay.
                      > > another idea is to use a couple pager motors to vibrate the glass.
                      > >
                      > >
                      >


                    • Lino
                      I will add that machines like traditional sla’s simply use the build plate to mix the material by lowering it and raising it in between builds. From:
                      Message 10 of 11 , Feb 18, 2013
                      • 0 Attachment

                        I will add that machines like traditional sla’s simply use the build plate to mix the material by lowering it and raising it in between builds.

                         

                        From: diy_3d_printing_and_fabrication@yahoogroups.com [mailto:diy_3d_printing_and_fabrication@yahoogroups.com] On Behalf Of Graham Stabler
                        Sent: Monday, February 18, 2013 8:12 AM
                        To: diy_3d_printing_and_fabrication@yahoogroups.com
                        Subject: Re: [diy_3d_printing_and_fabrication] Re: ultrasound mixer

                         

                         

                        Magnetic stirrer "fleas" might be a neat way to do it. 

                         

                        Graham

                         

                         

                        On Mon, Feb 18, 2013 at 2:59 PM, afogassa <afogassa@...> wrote:

                         

                        maybe you are right, i´ve being thinking about and i think a vibration system might work better then pumps. i just need to shake things up.
                        A pump would still have the pigment setting down at corner of the vat unless i´ve a tube running along the vat´s edge with lots of holes on it but then i mould need a powerfull pump and need extra resin to fill it up.
                        i don´t want to remove the resin from vat when i´m not using it becouse i lose some resin everytime i clean the vat and it can damage the silicon on a short time.
                        So, I think of having four motors with impellers or a single motor with a mixing arm (rc servo motor) to keep things moving when i´m not using it.my vat has a air tight top lid on it adding motors with impellers on the lid to keep it moving when i´m not using looks like a better idea.It would turn on and of maybe every 15 min. in stand by.
                        if i increase the vat return speed when printing would also keep the resin moving around and keep it well mixed during the build process.


                        --- In diy_3d_printing_and_fabrication@yahoogroups.com, Graham Stabler wrote:
                        >
                        > Or vibrate some paddles suspended in the resin. Or what about a frame
                        > (square with square cut out) sitting in the tank at the bottom around the
                        > build area, lifting this up and down would cause resin to be sucked under
                        > and then pushed out disturbing it?
                        >
                        > One general issue with using pumps to mix might be that you end up with
                        > areas with less flow and therefore a build up, like silt in a river. An
                        > ultrasonic mixer may be just the thing, no where for the resin to hide?
                        >
                        > Graham
                        >
                        >
                        >

                        > On Mon, Feb 18, 2013 at 12:35 AM, afogassa wrote:
                        >
                        > > **


                        > >
                        > >
                        > > it would be off when projecting. don´t know how the resin would react to
                        > > it thou.
                        > > I´ve seeing some water oil blending being done with ultrasound maybe it
                        > > can keep the pigment well mixed in the resin.
                        > > there are some cheap facial cleaning ultrasound stuff on ebay.
                        > > another idea is to use a couple pager motors to vibrate the glass.
                        > >
                        > >
                        >

                         

                      • arthur2shedsj
                        ... It s called a sonicator. Chemists that make inks, photopolymers, etc, etc, routinely use them to mix components. http://www.youtube.com/watch?v=ONFk6PZ2nNY
                        Message 11 of 11 , Feb 18, 2013
                        • 0 Attachment
                          --- In diy_3d_printing_and_fabrication@yahoogroups.com, "afogassa" <afogassa@...> wrote:
                          >
                          > maybe you are right, i´ve being thinking about and i think a vibration system might work better then pumps. i just need to shake things up.

                          It's called a sonicator. Chemists that make inks, photopolymers, etc, etc, routinely use them to mix components.

                          http://www.youtube.com/watch?v=ONFk6PZ2nNY is an example of dispersing carbon black in water with the aid of a sonicator. The carbon black won't be stable in the water (stay in suspension for several weeks/months) without additional processing steps.
                        Your message has been successfully submitted and would be delivered to recipients shortly.