- May 8, 2013Fantastic Job and good resolution!
Keep it going!
--- In email@example.com, "John" <johntyson@...> wrote:
> I just posted pics of by first successful print!!!!!
> The first few prints were EPIC failures. I had a detachment, a total failure of support structures, and a reversed image (it was upsidedown and backwards. I've gotten those problems solved so now I need to refine my resin pigmentation. I'm using SPOTA GP with Castin'Craft opaque pigments. (white and black to make grey) Red or yellow would probobly be better but I like the more neutral grey/green. My exposure time is 1650ms with a total layer cycle time of about 6 seconds. There were 215 layers so it took about 25 minutes to print.
- << Previous post in topic Next post in topic >>