8636Re: [diy_3d_printing_and_fabrication] Re: BENQ MX518 Settings. Brightness contrast smart eco
- Apr 28 1:33 PMsilly question but you are projecting white images aren't you?Graham
On 28 Apr 2013, at 21:31, "Lino" <creaturemaker@...> wrote:
It may be normal depending on what depth you are curing. Have you shaken up or stirred the resin. How old is it? Is it from spota or directly from b9. How far is the projector? Remember b9 does not change the projector other than adjusting the focal length
hey i got result but very long exposure time.. after setting brightness contrast etc..i got 40 sec exposure time... is it normal???
Projector is 2800 Lumens.. what about Brilliant Color Setting. should it be off or on???
--- In email@example.com, "Lino" <creaturemaker@...> wrote:
> What is your exposure rates?
> From: firstname.lastname@example.org
> [mailto:email@example.com] On Behalf Of Bhatt
> Sent: Sunday, April 28, 2013 6:42 AM
> To: firstname.lastname@example.org
> Subject: [diy_3d_printing_and_fabrication] BENQ MX518 Settings. Brightness
> contrast smart eco
> B9Red Resin doesnt react with this projector. what should be ideal setting
> for brightness contrast etc.i disabled smart eco mode. but still i observed
> its effect/ after 2-3 seconds black got blacker. i cant explain. Does anyone
> uses this projector or Similar projector? please share settings with me. i
> didnt removed colorwheel or IR filter this time.
- << Previous post in topic Next post in topic >>