Loading ...
Sorry, an error occurred while loading the content.

Re: [digsstv] SSTV Repeater 28.710

Expand Messages
  • ea8ee Jose Manuel
    Here in Canary Island good Condiction to Boston but nothing to do to SSTV repeater
    Message 1 of 2 , Oct 25, 2003
    • 0 Attachment
      Here in Canary Island good Condiction to Boston but nothing to do to
      SSTV repeater

      ka1rrw wrote:

      >ISS Amateur Radio Status: October 24, 2003
      >
      >SSTV Repeater SpaceCam1
      >
      >By Miles Mann WF1F,
      >
      >MAREX-MG News www.marexmg.org
      >
      >Manned Amateur Radio Experiment
      >
      >SSTV Repeater SpaceCam1:
      >
      >Hi everyone, there is a SSTV Repeater on the 10 meter band, 28.710
      >USB. This SSTV repeater is testing the new SSTV software that
      >MAREXMG/ARISS are planning on using on the International Space Station
      > next year ( if all goes as planned). If your SSTV program supports
      >the Repeater mode, then you should try to access the SpaceCam1
      >repeater located near Boston Mass. We are trying to load test the
      >software as much as possible to simulate the loads the Space Station
      >software may encounter. Good luck and have fun.
      >
      >http://www.marexmg.org/fileshtml/repeater.html
      >
      >
      >SpaceCam1 repeater access instructions
      >
      >Listen first, to make sure the frequency is clear.
      >Identify on SSB.
      >Transmit a 1750-hz tone, for approximately 2 seconds. (see your SSTV
      >program documentation)
      >Switch to receive mode immediately.
      > If SpaceCam1 hears your transmitted tone with at least a 10db
      >signal-to-noise ratio, it will respond with a 'K' in Morse.
      >Send your picture immediately.SpaceCam1 repeaters will always respond
      >to signals transmitted in Robot 36 mode. Other modes may
      >or may not be enabled by the operator.
      >If SpaceCam1 successfully receives your picture, it will re-transmit
      >it in the mode you sent it.
      >
      >Notes
      >
      >SpaceCam1 version 1.1 will transmit a DTMF (touch-tone) tone before
      >identifying, then re-transmitting the picture. Currently, SpaceCam1
      >repeaters are being operated in low-security mode. Testing schedules
      >for secure operations will be posted here
      >in advance, to avoid confusion. The option SSID is not required at
      >this time.
      >If you don't get a response from the repeater when you send a tone,
      >please do not transmit a picture. You may cause interference to
      >another station the repeater can hear, but you can't.
      >
      >
      >SpaceCam Slow Scan TV Status:
      >The ARISS team has put together a 6-man team of engineers to go to
      >Moscow in November 2003 (the ARISS team is made up of engineers from
      >NASA, AMSAT and MAREXMG). The team will be performing a full end to
      >end systems test of all of the new ISS-Ham Phase-2 hardware. The new
      >hardware includes a Kenwood D700, power supplies cables and the
      >SpaceCam software.
      >http://www.marexmg.org
      >
      >
      >73 Miles WF1F MAREX-MG
      >
      >Until we meet again
      >
      >DOSVIDANIYA Miles WF1F
      >
      >
      >
      >
      >
      >
      >
      >
      >
      >To unsubscribe from this group, send an email to:
      >digsstv-unsubscribe@yahoogroups.com
      >
      >
      >
      >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
      >
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.