Loading ...
Sorry, an error occurred while loading the content.

Re: [dallasaudioclub] Re: Ken does it again!

Expand Messages
  • James Dolan
    i like the naked look, seeing the layers of ply and mdf-- the layers themselves contribute design elements. but looking at ken s machine, it looks good to my
    Message 1 of 4 , Sep 3, 2007
    • 0 Attachment
      i like the naked look, seeing the layers of ply and mdf-- the layers themselves contribute design elements.  but looking at ken's machine, it looks good to my eye now, and i'm sure it will look super cool with black hammertone

      ----- Original Message ----
      From: Jim <jim@...>
      To: dallasaudioclub@yahoogroups.com
      Sent: Monday, September 3, 2007 12:15:24 PM
      Subject: [dallasaudioclub] Re: Ken does it again!

      Hey Jim,
      Good luck with your turntable project. You, or any member, are
      welcome to post Photo folders of your systems or A/V projects, rooms,
      etc. Anyone can send me (or any moderator) a photo you're especially
      proud of and we can post it on the home page for a time. Ken's
      turntable is "naked" at this point. It will most likely get several
      coats of black hammer tone paint. Finished project we plan will be
      black/silver. We have MANY members here who are great in the
      woodshop, mechanical and electronics. To name a few... Ken V., John
      S., Frank C. and Fred T. Sorry if I left anyone out. jim...

      --- In dallasaudioclub@ yahoogroups. com, James Dolan <shrinkboy99@ ...>
      wrote:

      >
      > looks very cool. i am going to go out on a limb and say that one
      day i hope to have something similar to show- a rebuilt Lenco L78
      idler drive table with Linn Basik tonearm and constrained layer
      plinth.
      >
      > ken's project looks really sweet. thanx
      >
      >
      >
      > ----- Original Message ----
      > From: Jim <jim@...>
      > To: dallasaudioclub@ yahoogroups. com
      > Sent: Sunday, September 2, 2007 5:05:34 PM
      > Subject: [dallasaudioclub] Ken does it again!
      >
      > New Home Page photo shows one of Ken's Rec-O-Kut creations happily
      playing at my place. Layered plinth of two MDF and two birch ply. A
      Rega RB250 with a Shure V15 typeIV, I think. German made motor, circa
      1961, totally separate from platter. Platter damped with Dynamat,
      rubber mat and a suede leather mat of my creation. A few other photos
      of it in Ken's same Photo album. 8:-) jim...
      >


    Your message has been successfully submitted and would be delivered to recipients shortly.