Loading ...
Sorry, an error occurred while loading the content.
 

Re: [cw_bugs] Vibroplex rivetless logo plate

Expand Messages
  • David Ring
    I believe Betsy at Vibroplex said they use Duco cement for affixing the newer non-threaded plastic decorative pieces and the new rivet-less plates. I d be
    Message 1 of 3 , Feb 4, 2008
      I believe Betsy at Vibroplex said they use Duco cement for affixing
      the newer non-threaded "plastic decorative pieces" and the new
      rivet-less plates.

      I'd be tempted to use hot glue as it could be pushed down and held for
      a short period and be stuck. Epoxy offers the problem of too much
      permanency.

      73

      DR.


      On Feb 4, 2008 2:14 PM, nzeronv <nzeronv@...> wrote:
      >
      >
      > Hello:
      >
      > I'm currently cleaning up an old Vibroplex bug which is losing its
      > logo/serial# plate. It is the rivetless type and I'm wondering what
      > king of adhesive has worked well for any of you who have already
      > re-attached one. I'm thinking of using 5-minute epoxy unless someone
      > has something better to suggest.
      >
      > Thanks / 73
      >
      > Jack - N0NV
      >
      >
      >
      >
      >
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
    • nzeronv
      Thanks for the quick reply David. Duco should be easy enough to find and I also have access to a hot glue gun, so I ll give either of those a try. Tks/73 Jack
      Message 2 of 3 , Feb 4, 2008
        Thanks for the quick reply David. Duco should be easy enough to find
        and I also have access to a hot glue gun, so I'll give either of those
        a try.

        Tks/73

        Jack - N0NV



        --- In cw_bugs@yahoogroups.com, "David Ring" <n1ea@...> wrote:
        >
        > I believe Betsy at Vibroplex said they use Duco cement for affixing
        > the newer non-threaded "plastic decorative pieces" and the new
        > rivet-less plates.
        >
        > I'd be tempted to use hot glue as it could be pushed down and held for
        > a short period and be stuck. Epoxy offers the problem of too much
        > permanency.
        >
        > 73
        >
        > DR.
        >
        >
        > On Feb 4, 2008 2:14 PM, nzeronv <nzeronv@...> wrote:
        > >
        > >
        > > Hello:
        > >
        > > I'm currently cleaning up an old Vibroplex bug which is losing its
        > > logo/serial# plate. It is the rivetless type and I'm wondering what
        > > king of adhesive has worked well for any of you who have already
        > > re-attached one. I'm thinking of using 5-minute epoxy unless someone
        > > has something better to suggest.
        > >
        > > Thanks / 73
        > >
        > > Jack - N0NV
        > >
        > >
        > >
        > >
        > >
        > >
        > > Yahoo! Groups Links
        > >
        > >
        > >
        > >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.