Loading ...
Sorry, an error occurred while loading the content.

Vibroplex rivetless logo plate

Expand Messages
  • nzeronv
    Hello: I m currently cleaning up an old Vibroplex bug which is losing its logo/serial# plate. It is the rivetless type and I m wondering what king of adhesive
    Message 1 of 3 , Feb 4, 2008
    • 0 Attachment
      Hello:

      I'm currently cleaning up an old Vibroplex bug which is losing its
      logo/serial# plate. It is the rivetless type and I'm wondering what
      king of adhesive has worked well for any of you who have already
      re-attached one. I'm thinking of using 5-minute epoxy unless someone
      has something better to suggest.

      Thanks / 73

      Jack - N0NV
    • David Ring
      I believe Betsy at Vibroplex said they use Duco cement for affixing the newer non-threaded plastic decorative pieces and the new rivet-less plates. I d be
      Message 2 of 3 , Feb 4, 2008
      • 0 Attachment
        I believe Betsy at Vibroplex said they use Duco cement for affixing
        the newer non-threaded "plastic decorative pieces" and the new
        rivet-less plates.

        I'd be tempted to use hot glue as it could be pushed down and held for
        a short period and be stuck. Epoxy offers the problem of too much
        permanency.

        73

        DR.


        On Feb 4, 2008 2:14 PM, nzeronv <nzeronv@...> wrote:
        >
        >
        > Hello:
        >
        > I'm currently cleaning up an old Vibroplex bug which is losing its
        > logo/serial# plate. It is the rivetless type and I'm wondering what
        > king of adhesive has worked well for any of you who have already
        > re-attached one. I'm thinking of using 5-minute epoxy unless someone
        > has something better to suggest.
        >
        > Thanks / 73
        >
        > Jack - N0NV
        >
        >
        >
        >
        >
        >
        > Yahoo! Groups Links
        >
        >
        >
        >
      • nzeronv
        Thanks for the quick reply David. Duco should be easy enough to find and I also have access to a hot glue gun, so I ll give either of those a try. Tks/73 Jack
        Message 3 of 3 , Feb 4, 2008
        • 0 Attachment
          Thanks for the quick reply David. Duco should be easy enough to find
          and I also have access to a hot glue gun, so I'll give either of those
          a try.

          Tks/73

          Jack - N0NV



          --- In cw_bugs@yahoogroups.com, "David Ring" <n1ea@...> wrote:
          >
          > I believe Betsy at Vibroplex said they use Duco cement for affixing
          > the newer non-threaded "plastic decorative pieces" and the new
          > rivet-less plates.
          >
          > I'd be tempted to use hot glue as it could be pushed down and held for
          > a short period and be stuck. Epoxy offers the problem of too much
          > permanency.
          >
          > 73
          >
          > DR.
          >
          >
          > On Feb 4, 2008 2:14 PM, nzeronv <nzeronv@...> wrote:
          > >
          > >
          > > Hello:
          > >
          > > I'm currently cleaning up an old Vibroplex bug which is losing its
          > > logo/serial# plate. It is the rivetless type and I'm wondering what
          > > king of adhesive has worked well for any of you who have already
          > > re-attached one. I'm thinking of using 5-minute epoxy unless someone
          > > has something better to suggest.
          > >
          > > Thanks / 73
          > >
          > > Jack - N0NV
          > >
          > >
          > >
          > >
          > >
          > >
          > > Yahoo! Groups Links
          > >
          > >
          > >
          > >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.