Loading ...
Sorry, an error occurred while loading the content.

Re: [cw_bugs] WB9LPU Rotobug

Expand Messages
  • Richard Meiss
    Hi, Chuck - Glad to have you aboard - now you know what I ve been up to. I don t have a way of posting the RotoBug manual, but I will send you a copy
    Message 1 of 13 , Apr 7, 2007
    • 0 Attachment
      Hi, Chuck -

      Glad to have you aboard - now you know what I've been up to. I don't have a way of posting the RotoBug manual, but I will send you a copy (attached PDF). I don't really have a good handle on the price yet. As for the RotoTwin, I am not yet convinced whether the complexity of a fully-automatic instrument is warranted in terms of the outcome; the gains in convenience are not all that great, the learning curve is steeper, and you have a bit less control over the "personality" of your sending. So we shall see.

      I won't have a table at Dayton per se, but I will be at the QRP ARCI show-and-tell night (Friday, in the Fairborn Holiday Inn) with some things to let folks take a look at. Anyone is welcome to drop by.

      My retirement is at the end of the summer, and I hope to have more time for things radio and telegraphic.

      73 de Rich, WB9LPU


      -----Original Message-----
      >From: k2cig <gehringc@...>
      >Sent: Apr 7, 2007 11:11 AM
      >To: cw_bugs@yahoogroups.com
      >Subject: [cw_bugs] WB9LPU Rotobug
      >
      >Rich,
      >Your Double Rotobug is brilliant!
      >I am still drooling over your single Rotobug.
      >
      >Can you give us a ROM (Rough Order of Magnitude, cost$) for either the
      >single or double Rotobug, plus or minus $200?
      >
      >Do you have a manual for your Double Rotobug and will you post some of
      >your manuals here for the CW Bugs Group? I always enjoy reading about
      >your work and luv the photos.
      >
      >Do you have a Table number for where you will be setup at Dayton?
      >
      >73 K2CG
      >Chuck G.
      >
    • ai4re
      ... don t have a way of posting the RotoBug manual, but I will send you a copy (attached PDF). If it s a PDF, can t it be put up in the FILES section of this
      Message 2 of 13 , Apr 10, 2007
      • 0 Attachment
        --- In cw_bugs@yahoogroups.com, Richard Meiss <wb9lpu@...> wrote:
        > Glad to have you aboard - now you know what I've been up to. I
        don't have a way of posting the RotoBug manual, but I will send you a
        copy (attached PDF).

        If it's a PDF, can't it be put up in the FILES section of this group?

        I would like to see it, too.

        John
      • Earl Needham
        ... I ll work on that... Earl KD5XB -- Earl Needham Clovis, New Mexico DM84jk http://groups.yahoo.com/group/cw_bugs
        Message 3 of 13 , Apr 10, 2007
        • 0 Attachment
          At 07:00 PM 4/10/2007, ai4re wrote:
          >If it's a PDF, can't it be put up in the FILES section of this group?

          I'll work on that...

          Earl

          KD5XB -- Earl Needham
          Clovis, New Mexico DM84jk
          http://groups.yahoo.com/group/cw_bugs
        • Richard Meiss
          Hi, John - Thanks for the tip. When I get back from this dial-up road trip, I will give it a try. 73 de Rich, WB9LPU
          Message 4 of 13 , Apr 10, 2007
          • 0 Attachment
            Hi, John -

            Thanks for the tip. When I get back from this dial-up road trip, I will give it a try.

            73 de Rich, WB9LPU


            -----Original Message-----
            >From: ai4re <ai4re@...>
            >Sent: Apr 10, 2007 9:00 PM
            >To: cw_bugs@yahoogroups.com
            >Subject: [cw_bugs] Re: WB9LPU Rotobug
            >
            >--- In cw_bugs@yahoogroups.com, Richard Meiss <wb9lpu@...> wrote:
            >> Glad to have you aboard - now you know what I've been up to. I
            >don't have a way of posting the RotoBug manual, but I will send you a
            >copy (attached PDF).
            >
            >If it's a PDF, can't it be put up in the FILES section of this group?
            >
            >I would like to see it, too.
            >
            >John
            >
            >
          Your message has been successfully submitted and would be delivered to recipients shortly.