Re: [cw_bugs] Re: slowing bugs down
The Navy Flameproof key is probably the best key for the money anywhere.
I believe I must have told you so during one of our telephone conversations. If I didn't I should have.
I smoothed out the knob on the flameproof so it doesn't irritate my fingers.
Screw that key down and you can REALLY send.
Why? Because you can pull and push with that type of knob. It's faster.
If you're interested in a tiny bug, look for K4VIZ on the internet - he makes a miniature bug. You don't get a good speed range - because of the limited pendulum.
David Ring, N1EAOn 3/10/07, n6vl <n6vl@...> wrote:
50 years of using bugs! I will be 50 years on the planet in a few
months, hi hi.
So are you saying the Vari-Speed is better than an Extendadot? In any
case I will be comparing the two within a few days. I ordered the
Vari-Speed based on your comments.
I compared my Extendadot with my original mod and they do feel
different. Just reading your comments makes me want to try other
ideas while waiting on the Vari-Speed. I have two weights, the 1 oz
and the 0.8 oz. I could bolt them together, side by side, at the end
of the arm to see the difference. Putting both weights directly on
the arm was not a good experience.
I keep wondering about different bugs other than the Champion. The
Champion is supposed to be a low end bug. Is this correct? I need
to look or eBay or eHam.net for other bugs. I was looking at a J-36
on eBay last week and the price really shot up. I prefer to stick
with Vibroplex because of parts.
I just found yet another straight key, the Navy Flame-Proof. This one
is in mint condition and blows away other straight keys rivaling my
Swedish Pump key clone. OK straight keys are off topic. But I like to
brag about a good one.
Now if they would make a nice mini-bug! Bug aren't portable. The Navy
Flame-Proof is small enough to go portable.
- Thanks for sharing your insight.
I second your approval of the Vari-Speed. I was originally skeptical
of it because of torsion effects, which I reasoned could rub the dot
contact vertically during use, especially considering the thinner main
springs currently manufactured into Vibroplex Originals. I notice no
bad results, however.
The flat version of the Vari-Speed is especially useful with a
Vibroplex Champion model, which has no damper bridge to restrict the
position or rotation.
With my configuration, the dot speed is 15 to 28 WPM. If any of you
can send 18-20 wpm with a straight key for an hour or more with no ill
effects, more power to you -- I can't.
Jack - N0NV
--- In email@example.com, "Trail Fox" <KT5X@...> wrote:
> From my observation across (fifty years) of bug use...
> * Additional weights so increase the mass of the pendulum as to make
operating it both different and non-instructive. during professional
use days that simply wasn't done even for learning.
> * adding more weights doesn't slow the bug down much because they
wind up being placed closer to the pendulum.
> * The large diameter weights used by some Mac bugs and E F Johnson
have a MUCH better effect on speed becauseit puts more weight further
out on the pendulum.
> * Wrapping solder around the wieght at the end of the bug will slow
the bug down much more than adding a second weight.
> Unfortunately, the large diameter weights are harder to come by, and
the holes in them don't necessarily fit on vibroplex bugs.
> Rather than extensions that add SO much mass and change the feel of
the pendulum, or extra weights that do the same thing with relatively
little effect on speed, I use the recent remake (by Tim Soxman) of the
Hills Speed-changer. vibroplex sells them under the name, Varispeed.
> The Varispeed uses one weight, and the device itself is about the
equivalent of a second weight. it provides near instant speed
changing by rotating the arm. It will slow the bug down way slower
than second, third, or fourth weights because by rotating it the small
weight can extend the length of the pendulum which does more than
adding weight does. in so doing it does not add mass like extra
weights or the extension arm.
> the Varispeed is the way to go IMHO. Here is a Varispeed on my
(restored) 1918 Vibroplex...
> And the very best configuration of all is a Varispeed on the old
U-shaped damper blue Racers, because without the damper in the way,
the varispeed and its weight can rotate straight back and slow the bug
down to a crawl.
> A few other comments on bug speed...
> The slowest American bugs I have encountered are the 1930's vintage
> The slowest bug I have ever encountered, by far, is the Australian
Simplex-Auto. This is a right-angle bug that uses a release mechanism
like Coffe's Mecograph of the early 1900's. It will go ten wpm,
> Western Union established a fixed speed of 28 wpm. I have found old
bugs with the weight soldered in place at this speed.
> With best wishes,
> FD - kt5x
> [Non-text portions of this message have been removed]