Loading ...
Sorry, an error occurred while loading the content.

FW: RE: [cosmacelf] Elf2000 Redux ?

Expand Messages
  • Craig Ledbetter
    I would buy the ElfDisk board and wish I could get the general purpose IO card and the Pixie card. I too would like to know where to get the board to board
    Message 1 of 2 , Oct 5, 2011
    • 0 Attachment
      I would buy the ElfDisk board and wish I could get the general purpose IO
      card and the Pixie card.



      I too would like to know where to get the board to board connector.



      Craig Ledbetter

      Ireland



      _____

      From: cosmacelf@yahoogroups.com [mailto:cosmacelf@yahoogroups.com] On Behalf
      Of Chuck Bigham
      Sent: 05 October 2011 20:32
      To: cosmacelf@yahoogroups.com
      Subject: RE: [cosmacelf] Elf2000 Redux ?





      I'd buy an ELF disk board, but I'd need the board-to-board connector. That
      was a special part, right?

      Chuck

      Sent from my Windows Phone
      ________________________________
      From: Bob Armstrong
      Sent: 10/5/2011 8:53 AM
      To: cosmacelf@yahoogroups.com <mailto:cosmacelf%40yahoogroups.com>
      Subject: [cosmacelf] Elf2000 Redux ?

      How many people would be interested in another run of Elf2K PC boards?
      I'd probably sell the PC boards packaged together with pre-programmed EPROMs
      and GALs for the Elf2K, and the package (PCB + EPROM + GAL) would probably
      sell for about $40.

      I could also re-run the ElfDisk board if there's enough interest; these
      add a disk (IDE/ATA or CF card) interface, a 16550 UART and an RTC/NVR to
      the Elf2K. This combination, the Elf2K plus the ElfDisk board, allows you
      to run Mike Riley's ElfOS disk operating system and that package, PCB+GAL,
      would probably be about $30.

      Remember that this is just for the PCB and GALs/EPROMs - you'd still have
      to source the rest of the parts yourself. Pretty much everything else, with
      the exception of the 1802 and the TIL311s, are "modern" production parts and
      are easy to find. You can find a complete parts list in the back of the
      Elf2K manual.

      You can see pictures of the Elf2K, et al, here

      http://www.sparetimegizmos.com/Hardware/Elf2K.htm

      and here

      http://www.sparetimegizmos.com/Hardware/Elf2K_Accessories.htm

      and the complete manual for the Elf2K and peripherals is here

      http://www.sparetimegizmos.com/Downloads/Elf2k.pdf

      Mike Riley's ElfOS is documented here

      http://www.elf-emulation.com/elfos.html

      Bob Armstrong

      [Non-text portions of this message have been removed]

      [Non-text portions of this message have been removed]







      [Non-text portions of this message have been removed]
    • Doug Jackson
      Add me to the list as well - I would love a board set and specialised bits - I have the TIL311s and 1802 waiting :-) Doug Jackson Australia On Thu, Oct 6, 2011
      Message 2 of 2 , Oct 5, 2011
      • 0 Attachment
        Add me to the list as well - I would love a board set and specialised bits -
        I have the TIL311s and 1802 waiting :-)

        Doug Jackson
        Australia



        On Thu, Oct 6, 2011 at 8:05 AM, Craig Ledbetter
        <craigaledbetter@...>wrote:

        > **
        >
        >
        > I would buy the ElfDisk board and wish I could get the general purpose IO
        > card and the Pixie card.
        >
        > I too would like to know where to get the board to board connector.
        >
        > Craig Ledbetter
        >
        > Ireland
        >
        > _____
        >
        > >From: cosmacelf@yahoogroups.com [mailto:cosmacelf@yahoogroups.com] On
        > Behalf
        > Of Chuck Bigham
        > Sent: 05 October 2011 20:32
        > To: cosmacelf@yahoogroups.com
        > Subject: RE: [cosmacelf] Elf2000 Redux ?
        >
        > I'd buy an ELF disk board, but I'd need the board-to-board connector. That
        > was a special part, right?
        >
        > Chuck
        >
        > Sent from my Windows Phone
        > ________________________________
        > >From: Bob Armstrong
        > Sent: 10/5/2011 8:53 AM
        > To: cosmacelf@yahoogroups.com <mailto:cosmacelf%40yahoogroups.com>
        > Subject: [cosmacelf] Elf2000 Redux ?
        >
        > How many people would be interested in another run of Elf2K PC boards?
        > I'd probably sell the PC boards packaged together with pre-programmed
        > EPROMs
        > and GALs for the Elf2K, and the package (PCB + EPROM + GAL) would probably
        > sell for about $40.
        >
        > I could also re-run the ElfDisk board if there's enough interest; these
        > add a disk (IDE/ATA or CF card) interface, a 16550 UART and an RTC/NVR to
        > the Elf2K. This combination, the Elf2K plus the ElfDisk board, allows you
        > to run Mike Riley's ElfOS disk operating system and that package, PCB+GAL,
        > would probably be about $30.
        >
        > Remember that this is just for the PCB and GALs/EPROMs - you'd still have
        > to source the rest of the parts yourself. Pretty much everything else, with
        > the exception of the 1802 and the TIL311s, are "modern" production parts
        > and
        > are easy to find. You can find a complete parts list in the back of the
        > Elf2K manual.
        >
        > You can see pictures of the Elf2K, et al, here
        >
        > http://www.sparetimegizmos.com/Hardware/Elf2K.htm
        >
        > and here
        >
        > http://www.sparetimegizmos.com/Hardware/Elf2K_Accessories.htm
        >
        > and the complete manual for the Elf2K and peripherals is here
        >
        > http://www.sparetimegizmos.com/Downloads/Elf2k.pdf
        >
        > Mike Riley's ElfOS is documented here
        >
        > http://www.elf-emulation.com/elfos.html
        >
        > Bob Armstrong
        >
        > [Non-text portions of this message have been removed]
        >
        > [Non-text portions of this message have been removed]
        >
        > [Non-text portions of this message have been removed]
        >
        >
        >



        --
        Doug Jackson
        VK1ZDJ
        http://www.dougswordclock.com/ -< My clocks
        http://www.vk1zdj.net -< My Amature Radio Activities


        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.