Loading ...
Sorry, an error occurred while loading the content.

4711Re: Pico/Elf V2 Update

Expand Messages
  • rileym65
    May 2, 2006
      Wagner,
      no problem. and the western union would be just fine.
      Mike

      --- In cosmacelf@yahoogroups.com, "wagner" <wjg1@...> wrote:
      >
      > Hello Mister Mike
      > I made one e-mail to you, but i think it is lost
      > I am interest in buy one kit of Pico/Elf V2
      > But i live in the city of Sao Paulo , Brazil
      > And i question you , if you accept the Western Union Bank order
      > Much Obliged
      > Wagner
      > ----- Original Message -----
      > From: rileym65
      > To: cosmacelf@yahoogroups.com
      > Sent: Monday, May 01, 2006 7:32 PM
      > Subject: [cosmacelf] Re: Pico/Elf V2 Update
      >
      >
      > With the current number of interested people, a full kit will be about
      > $80.
      > Mike
      >
      > --- In cosmacelf@yahoogroups.com, "Jon Fleming" <jonfleming@> wrote:
      > >
      > > I'd also be interested in a board, plus the rest of the kit.
      > > Especially if it looks like it'll come in under $100!
      > >
      > > --- In cosmacelf@yahoogroups.com, rileym65 <no_reply@> wrote:
      > > >
      > > > With the current number of boards that people are interested in,
      > > the
      > > > price right now would be about $35. Again, the more boards
      people
      > > are
      > > > interested in, the lower this price becomes.
      > > > Mike
      > > >
      > > > --- In cosmacelf@yahoogroups.com, "Allison Parent" <kb1gmx@>
      wrote:
      > > > >
      > > > > Mike,
      > > > >
      > > > > I'm interested if the board price is $25 or close.
      > > > >
      > > > >
      > > > > Allison
      > > > >
      > > > >
      > > > > --- In cosmacelf@yahoogroups.com, rileym65 <no_reply@> wrote:
      > > > > >
      > > > > > To anybody who is interested in the Pico/Elf V2. I have
      > > ordered 2
      > > > > > prototype boards today. After I have built the prototype and
      > > > > > validated the design I will make the PCB (or kit) available.
      > > Here are
      > > > > > the costs associated with building a Pico/Elf V2:
      > > > > >
      > > > > > PCB $9.40 up to $107
      > > > > > CDP1802 Whatever you can find them for
      > > > > > Other parts $21.06 (when ordered from Jameco)
      > > > > > ROM (27c256OTP) $1.99 (if you can burn your own)
      > > > > > Power supply any +5v supply should do
      > > > > >
      > > > > > The price of the PCB is dependent on how many are ordered,
      the
      > > worst
      > > > > > case of $107 is buying only 2 boards, the best case of $9.40
      > > is based
      > > > > > on a 100 piece lot. So, the more boards people are
      interested
      > > in, the
      > > > > > cheaper they will be for all of us.
      > > > > >
      > > > > > I can provide the rom burned with my BIOS and ELF/OS
      installer
      > > for $5
      > > > > > plus shipping for anybody who cannot burn their own,
      otherwise
      > > the
      > > > > > images necessary for making th
      > > > >
      > > > > e rom are available from my site.
      > > > > >
      > > > > > For somebody who wants a full kit (including cpu and rom), it
      > > will be
      > > > > > priced at around $40 plus the cost of the PCB (the PCB being
      > > the
      > > > > > variable part of the cost)
      > > > > >
      > > > > > Here are the specs of the Pico/Elf V2:
      > > > > > CDP1802 CPU running up to 5mhz (with a CDP1802BCE)
      > > > > > 32k RAM
      > > > > > 32k ROM (BIOS and Elf/OS installation package)
      > > > > > MAX232 RS232 port
      > > > > > 8-bit IDE interface
      > > > > > Micro/Elf V2 expansion bus
      > > > > > Runs from a single +5v supply
      > > > > > Board size: 4.7" x 3.85"
      > > > > >
      > > > > > This machine can be used with either my 1861/ps2 interface or
      > > my
      > > > > > tms9118/ps2 interface. The Micro/Elf expansion board cannot
      > > be used
      > > > > > with this, nor is it needed, everything the Micro/Elf
      > > expansion board
      > > > > > gives is already part of the Pico/Elf. This machine can also
      > > be used
      > > > > > with the Pico/Elf front panel expansion.
      > > > > >
      > > > > > Note: This machine requires some kind of rom to work. It was
      > > > > > designed as a machine for running Elf/OS but could be used
      for
      > > other
      > > > > > purposes with the correct rom. Even with the front panel
      this
      > > machine
      > > > > > has no load mode and so would at least need some form of
      small
      > > os in
      > > > > > the rom to use just the front panel.
      > > > > >
      > > > > > If you are interested in a Pico/Elf board or kit, or have
      > > questions
      > > > > > concerning this machine, please feel free to contact me.
      > > > > >
      > > > > > Mike
      > > > > >
      > > > >
      > > >
      > >
      >
      >
      >
      >
      >
      >
      > ========================================================
      > Visit the COSMAC ELF website at http://www.cosmacelf.com
      >
      >
      >
      > SPONSORED LINKS Palm os database Palm os development software
      Palm os development
      > Palm os software Palm os bible Palm os programming
      >
      >
      >
      ------------------------------------------------------------------------------
      > YAHOO! GROUPS LINKS
      >
      > a.. Visit your group "cosmacelf" on the web.
      >
      > b.. To unsubscribe from this group, send an email to:
      > cosmacelf-unsubscribe@yahoogroups.com
      >
      > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
      Service.
      >
      >
      >
      ------------------------------------------------------------------------------
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
    • Show all 22 messages in this topic