Loading ...
Sorry, an error occurred while loading the content.

105466Re: CYOA - Re: winches without handles?

Expand Messages
  • Darrell Parker
    Apr 1, 2009
    • 0 Attachment
      Muchos Gracias




      ________________________________
      From: Bill Casnovsky <bill@...>
      To: columbiasailingyachts@yahoogroups.com
      Sent: Wednesday, April 1, 2009 12:48:12 PM
      Subject: Re: CYOA - Re: winches without handles?


      OK, Darrell. I will get PDFs or JPEGs for you.

      Bill Caz.
      C26MK2, Banshee

      ----- Original Message -----
      From: Darrell Parker
      To: columbiasailingyach ts@yahoogroups. com
      Sent: Wednesday, April 01, 2009 2:35 PM
      Subject: Re: CYOA - Re: winches without handles?

      Can you send me a PDF copy of the specs pages and pictures?

      Thanks

      Darrell

      ____________ _________ _________ __
      From: Bill Casnovsky <bill@cazdezign. com>
      To: columbiasailingyach ts@yahoogroups. com
      Sent: Wednesday, April 1, 2009 8:43:18 AM
      Subject: Re: CYOA - Re: winches without handles?

      Darrell & Jeff,

      I have a copy of the original owners manual. Can provide you with all the standing & running rigging specs you need.

      Bill Caz.
      C26MK2, Banshee
      Austin, Texas

      ----- Original Message -----
      From: jeff talbut
      To: columbiasailingyach ts@yahoogroups. com
      Sent: Wednesday, April 01, 2009 3:49 AM
      Subject: CYOA - Re: winches without handles?

      Do one of you MkII guys have a rig plan? Eric?

      --- In columbiasailingyach ts@yahoogroups. com, Darrell Parker <dagdasondrp@ ...> wrote:
      >
      > I got a 72 C26MKII standard keel and I need all stay rigging for the mast, don't have the specs
      >
      > Sorry
      >
      > Darrell
      >
      >
      >
      >
      > ____________ _________ _________ __
      > From: jeff talbut <jefftalbut@ ...>
      > To: columbiasailingyach ts@yahoogroups. com
      > Sent: Wednesday, April 1, 2009 1:33:22 AM
      > Subject: CYOA - Re: winches without handles?
      >
      >
      > I'll be going up weds for the Mac. seminar and I'll stop by the knackers yard and see whats there. There is one that's close with all internal lines but no spinny stuff, there is another with external halyards and all spinney stuff. I'll bring a tape. If marginally too long it could be cut down, much too long and the spreaders and mast winches would be misplaced. There are six or eight that I know are too short. I'm assuming yours is deck stepped?
      >
      > --- In columbiasailingyach ts@yahoogroups. com, Harry James <welshman@ .> wrote:
      > >
      > > Thats heartbreaking
      > >
      > > Need a 35' mast single spreader newer than 48 years old 14.5 boom
      > >
      > > HJ
      > >
      > > jeff talbut wrote:
      > > > -The ones here do, they go head to head with West Marine(and are losing)
      > > > But the reason I asked about what was needed and lengths had nothing to do with BW. There are a bunch of boats getting scrapped and if the measurements work out the stuff may be available cheap(looks like all the masts and rigging are going straight to the scrap yard for poundage) They had a D-9 running back and forth over a bunch of hulls at a place I went to Sat.,three or four woodies cut into six foot lengths at a place today.
      > > >
      > > > -- In columbiasailingyach ts@yahoogroups. com, <sgaber@> wrote:
      > > >
      > > >> I doubt Boaters' World has any sailboat gear at all.
      > > >>
      > > >> Steve Gaber
      > > >> Sanderling, 1967 C-31 #77
      > > >> Oldsmar, FL
      > > >>
      > > >> ---- Darrell Parker <dagdasondrp@ > wrote:
      > > >>
      > > >>> Did they have any rigging for a C26MKII, I need to replace some of the standing rigging?
      > > >>>
      > > >>> Darrell
      > > >>>
      > > >>>
      > > >>>
      > > >>>
      > > >>> ____________ _________ _________ __
      > > >>> From: jeff talbut <jefftalbut@ >
      > > >>> To: columbiasailingyach ts@yahoogroups. com
      > > >>> Sent: Tuesday, March 31, 2009 11:07:43 PM
      > > >>> Subject: CYOA - Re: winches without handles?
      > > >>>
      > > >>>
      > > >>> I know you weren't...I had just gotten back from ten hours on the road,up the river to Port Huron and back, was reviewing posts, so I saw them in reverse order. Thought it looked funny....read them all, it was good advice.(I was going to start a whole rip about how your future bigger boat, the one you can drive a segway on, could use his as a dinghy)
      > > >>> Saw a beautiful old schooner today,129ft on deck, one of the old "letter" boats(not a "J") and "Earth Voyager" a really BIG tri...plus a whole bunch of Columbias from a 50 to a couple of 22's. One of the nice things about my job is I get to poke around a lot of boat yards.Two different "Boaters World" stores are going out of business and selling out to the walls, they're at 20/30% off right now and will keep discounting till every thing is gone. All in all not a bad day...
      > > >>>
      > > >>> --- In columbiasailingyach ts@yahoogroups. com, Jim Muri <irumrj@> wrote:
      > > >>>
      > > >>>> Hah! No, Jeff, I wasn't casting a slur, as David knows very well. He asked about 'appropriate for spinnaker sheets?' to which, given that he has a 22 and is talking about a spinnaker, I recommended 'lightweight' sheets. Lighter sheets mean that the spinnaker will fill more easily in light breezes, something David has had in spades for at least two races I know of. Reading back a few posts, I see where maybe he was talking about turning blocks for the sheets.
      > > >>>>
      > > >>>> Lightweight for those too, I think, although of course appropriate for boat size. We're not talking huge loads.
      > > >>>>
      > > >>>> On another note, my 11,000 pound vessel doesn't have dedicated spinnaker winches. I've never needed them, because - gasp! - my headsail is furled before the chute is fully deployed.  So those winches are available for the spinnaker sheets. I have a block for each sheet on the aft slot rail, and the lines go to the winches just fine.
      > > >>>>
      > > >>>> So just to make it clear again, I was referring to sheet size appropriate to a spinnaker for Eaglet.Â
      > > >>>> Â James R. Muri
      > > >>>>
      > > >>>> Novelist, Sailor
      > > >>>> BUY: My e-Novels at http://blizzardguy. com/venture/
      > > >>>> SITE: http://blizzardguy. com
      > > >>>> BLOG: http://theostrichki ller.blogspot. com
      > > >>>>
      > > >>>>
      > > >>>>
      > > >>>>
      > > >>>> ____________ _________ _________ __
      > > >>>> From: jeff talbut <jefftalbut@ ...>
      > > >>>> To: columbiasailingyach ts@yahoogroups. com
      > > >>>> Sent: Tuesday, March 31, 2009 6:50:09 PM
      > > >>>> Subject: CYOA - Re: winches without handles?
      > > >>>>
      > > >>>>
      > > >>>> wow Jim, I can't believe you called Dave a "lightweight" ...now that is inappropriate! What is happening here, first no one will stay on topic and now people have descended to name calling.
      > > >>>>
      > > >>>> --- In columbiasailingyach ts@yahoogroups. com, Jim Muri <irumrj@> wrote:
      > > >>>>
      > > >>>>> Lightweight.
      > > >>>>> Â James R. Muri
      > > >>>>>
      > > >>>>> Novelist, Sailor
      > > >>>>> BUY: My e-Novels at http://blizzardguy. com/venture/
      > > >>>>> SITE: http://blizzardguy. com
      > > >>>>> BLOG: http://theostrichki ller.blogspot. com
      > > >>>>>
      > > >>>>>
      > > >>>>>
      > > >>>>>
      > > >>>>> ____________ _________ _________ __
      > > >>>>> From: David Morgan <sapper69k@ ..>
      > > >>>>> To: columbiasailingyach ts@yahoogroups. com
      > > >>>>> Sent: Tuesday, March 31, 2009 9:09:14 AM
      > > >>>>> Subject: Re: CYOA - Re: winches without handles?
      > > >>>>>
      > > >>>>>
      > > >>>>> Appropriate for spinnaker sheets for my 22?Â
      > > >>>>>
      > > >>>>> David
      > > >>>>> Bremerton, WA
      > > >>>>> 1968 C-22 #1109
      > > >>>>> "Eaglet"
      > > >>>>>
      > > >>>>> --- On Tue, 3/31/09, jeff talbut <jefftalbut@ hotmail. com> wrote:
      > > >>>>>
      > > >>>>> From: jeff talbut <jefftalbut@ hotmail. com>
      > > >>>>> Subject: CYOA - Re: winches without handles?
      > > >>>>> To: columbiasailingyach ts@yahoogroups. com
      > > >>>>> Date: Tuesday, March 31, 2009, 3:41 PM
      > > >>>>>
      > > >>>>> snubbing winch...two turns controls the angle and gives enough resistance to stop the line jerking in your hand...
      > > >>>>>
      > > >>>>> --- In columbiasailingyach ts@yahoogroups. com, David Morgan <sapper69k@ ...> wrote:
      > > >>>>>
      > > >>>>>> Has anyone ever seen or heard of winches that didn't have some kind of handle?Â
      > > >>>>>> Â
      > > >>>>>> At 2 inches they may be small enough one isn't needed, but I hadn't ever seen any like that.Â
      > > >>>>>>
      > > >>>>>> David
      > > >>>>>> Bremerton, WA
      > > >>>>>> 1968 C-22 #1109
      > > >>>>>> "Eaglet"
      > > >>>>>>
      > > >>>>>>
      > > >>>>>>
      > > >>>>>>
      > > >>>>>> [Non-text portions of this message have been removed]
      > > >>>>>>
      > > >>>>>>
      > > >>>>> [Non-text portions of this message have been removed]
      > > >>>>>
      > > >>>>>
      > > >>>>>
      > > >>>>>
      > > >>>>>
      > > >>>>>
      > > >>>>>
      > > >>>>> [Non-text portions of this message have been removed]
      > > >>>>>
      > > >>>>>
      > > >>>>
      > > >>>>
      > > >>>>
      > > >>>>
      > > >>>>
      > > >>>> [Non-text portions of this message have been removed]
      > > >>>>
      > > >>>>
      > > >>>
      > > >>>
      > > >>>
      > > >>>
      > > >>>
      > > >>> [Non-text portions of this message have been removed]
      > > >>>
      > > >>>
      > > >> --
      > > >> Steve Gaber
      > > >> Sanderling, 1967 C-31 #77
      > > >> Oldsmar, FL
      > > >>
      > > >>
      > > >
      > > >
      > > >
      > > >
      > > > ------------ --------- --------- ------
      > > >
      > > > Columbia Yacht Owners Association Website:
      > > > http://www.columbia-yachts.com/
      > > >
      > > > Home:
      > > > http://www.egroups. com/group/ columbiasailingy achts/
      > > >
      > > > To Post a message, send it to: columbiasailingyach ts@
      > > >
      > > > To Subscribe, send a message to: columbiasailingyach ts-subscribe@ ...
      > > >
      > > > To Unsubscribe, send a blank message to: columbiasailingyach ts-unsubscribe@ ...! Groups Links
      > > >
      > > >
      > > >
      > > >
      > > >
      > >
      >
      >
      >
      >
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >

      [Non-text portions of this message have been removed]

      [Non-text portions of this message have been removed]

      [Non-text portions of this message have been removed]







      [Non-text portions of this message have been removed]
    • Show all 37 messages in this topic