Loading ...
Sorry, an error occurred while loading the content.
 

Re: 69 Dodge Travco 2700

Expand Messages
  • Jim Pipkin
    ... Napa auto parts still carry a lot of parts for the M375. Only proplem is, some times, you need the Dodge part number for them to be able to cross ref..
    Message 1 of 23 , Oct 3, 2000
      --- In classicrv@egroups.com, "Lew " <PeugeotLew@a...> wrote:
      > Help , I need a master cylinder for my motorhome. It has the M375
      > chassis with 318 auto manual brakes. Any one have any ideas
      > Lew Bailie

      Napa auto parts still carry a lot of parts for the M375. Only
      proplem is, some times, you need the Dodge part number for them to be
      able to cross ref..
    • JIM ROGERS
      IF YOU GOT SOME LUCK DODGE CAN CROSS REF THE PART NUMBER FOR YOU JUST NEED TO FIND THE RIGHT PARTS MAN/WOMAN GOOD LUCK ALSO SOME PLACE IN PAST MESSAGES IS
      Message 2 of 23 , Oct 3, 2000
        IF YOU GOT SOME LUCK DODGE CAN CROSS REF THE PART NUMBER FOR YOU JUST NEED TO FIND THE RIGHT PARTS MAN/WOMAN GOOD LUCK ALSO SOME PLACE IN PAST MESSAGES IS A NUMBER FOR A COMPANY THAT HAS ALL THE OLD DODGE BREAKS PARTS

        >>> jpipkin@... 10/03/00 01:08PM >>>
        --- In classicrv@egroups.com, "Lew " <PeugeotLew@a...> wrote:
        > Help , I need a master cylinder for my motorhome. It has the M375
        > chassis with 318 auto manual brakes. Any one have any ideas
        > Lew Bailie

        Napa auto parts still carry a lot of parts for the M375. Only
        proplem is, some times, you need the Dodge part number for them to be
        able to cross ref..


        To unsubscribe from this group, send an email to:
        classicrv-unsubscribe@egroups.com
      • stuart.peck@bt.com
        Try a rebuild kit,I did it on my m400 chassis master and it worked but you need to hone all the rust from the bore.all the bits are easier to get than a new
        Message 3 of 23 , Oct 3, 2000
          Try a rebuild kit,I did it on my m400 chassis master and it worked but you
          need to hone all the rust from the bore.all the bits
          are easier to get than a new unit..Bendix still make them but they are
          EXPENSIVE!!!!!
          Stuart.....
          -----Original Message-----
          From: Jim Pipkin [SMTP:jpipkin@...]
          Sent: Tuesday, October 03, 2000 6:08 PM
          To: classicrv@egroups.com
          Subject: [classicrv] Re: 69 Dodge Travco 2700

          --- In classicrv@egroups.com, "Lew " <PeugeotLew@a...> wrote:
          > Help , I need a master cylinder for my motorhome. It has the M375
          > chassis with 318 auto manual brakes. Any one have any ideas
          > Lew Bailie

          Napa auto parts still carry a lot of parts for the M375. Only
          proplem is, some times, you need the Dodge part number for them to
          be
          able to cross ref..


          To unsubscribe from this group, send an email to:
          classicrv-unsubscribe@egroups.com
        • Ted Hildebrand
          Jim I manage an auto parts store I will be glad to check on that for you. Ted ... From: Jim Pipkin To: Sent:
          Message 4 of 23 , Oct 3, 2000
            Jim

            I manage an auto parts store I will be glad to check on that for you.

            Ted


            ----- Original Message -----
            From: "Jim Pipkin" <jpipkin@...>
            To: <classicrv@egroups.com>
            Sent: Tuesday, October 03, 2000 1:08 PM
            Subject: [classicrv] Re: 69 Dodge Travco 2700


            > --- In classicrv@egroups.com, "Lew " <PeugeotLew@a...> wrote:
            > > Help , I need a master cylinder for my motorhome. It has the M375
            > > chassis with 318 auto manual brakes. Any one have any ideas
            > > Lew Bailie
            >
            > Napa auto parts still carry a lot of parts for the M375. Only
            > proplem is, some times, you need the Dodge part number for them to be
            > able to cross ref..
            >
            >
            > To unsubscribe from this group, send an email to:
            > classicrv-unsubscribe@egroups.com
            >
            >
            >
          • Jim Pipkin
            Thanks for all the answers. But my post was answering that question which someone else posted in another group. I don t know how I managed to get it posted
            Message 5 of 23 , Oct 3, 2000
              Thanks for all the answers. But my post was answering that question
              which someone else posted in another group. I don't know how I
              managed to get it posted here.

              I have no problems cross referencing part numbers as I have a copy
              of the parts manual. If anyone needs cross reference info. I may be
              able to help.

              Regards

              Jim
            • Mary Ann
              Jim, I am in the process of restoring a 1979 Champion Titan and found a place that has a number of used motor homes and is selling parts from them. I do not
              Message 6 of 23 , Oct 3, 2000
                Jim,

                I am in the process of restoring a 1979 Champion Titan and found a place
                that has a number of used motor homes and is selling parts from them. I do
                not know if he will have what you need but it may be worth a phone call.
                The name is Arrington's Used Cars & R.V.
                located in Addison, Al the phone number is 256-747-2222. I purchased a
                number of parts very reasonable.

                Bob

                At 06:27 PM 10/03/2000 -0400, you wrote:
                >Jim
                >
                >I manage an auto parts store I will be glad to check on that for you.
                >
                >Ted
                >
                >
                >----- Original Message -----
                >From: "Jim Pipkin" <jpipkin@...>
                >To: <classicrv@egroups.com>
                >Sent: Tuesday, October 03, 2000 1:08 PM
                >Subject: [classicrv] Re: 69 Dodge Travco 2700
                >
                >
                > > --- In classicrv@egroups.com, "Lew " <PeugeotLew@a...> wrote:
                > > > Help , I need a master cylinder for my motorhome. It has the M375
                > > > chassis with 318 auto manual brakes. Any one have any ideas
                > > > Lew Bailie
                > >
                > > Napa auto parts still carry a lot of parts for the M375. Only
                > > proplem is, some times, you need the Dodge part number for them to be
                > > able to cross ref..
                > >
                > >
                > > To unsubscribe from this group, send an email to:
                > > classicrv-unsubscribe@egroups.com
                > >
                > >
                > >
                >
                >
                >To unsubscribe from this group, send an email to:
                >classicrv-unsubscribe@egroups.com
                >
                >
              • PeugeotLew@aol.com
                Hi, I was able to find a new master cylinder from a brake specialist in california for $78.00 which in my eyes was a bargain! This fellows shop is listed in
                Message 7 of 23 , Oct 4, 2000
                  Hi,
                  I was able to find a new master cylinder from a brake specialist in
                  california for $78.00 which in my eyes was a bargain! This fellows shop is
                  listed in the Dodge-Travco group here on E-Groups. I went to NAPA first and
                  they could not find the M-375 chassis in their books,gave me a long story and
                  left. As a mechanic I knew the right part was out there so on the web I
                  went.... It is in and working but now blew a wheel cylinder the day we went
                  to drive her home. I had to send it out to a shop where I bought the travie
                  to have it repaired. An 8' bar was bent by us trying to break the lug nut
                  loose so..we figured air tools were needed. We live 130 miles from where our
                  baby is and became tired of driving back and forth . With luck it will be
                  ready for pick up soon..... The fun just never ends!
                  Lew '69 Dodge Travco 2700
                • Jim Clay
                  Hi Lew, Glad you found the master cyl.I posted a number of an outfit in Iowa that claims to have parts for the old Dodges.Look back a week or so.RVS in Morgan
                  Message 8 of 23 , Oct 4, 2000
                    Hi Lew,
                    Glad you found the master cyl.I posted a number of an outfit in Iowa
                    that claims to have parts for the old Dodges.Look back a week or so.RVS in
                    Morgan Hill,Calif.(1-800-821-2266)usually has parts for the 440 m/i(a lot
                    interchange)They are the factory service center for the FMC built from'73 to
                    '76.We have a '74 that works great.
                    Think I'd consider changing the wheel studs when you get her home.I found
                    some of the holes egged out when we bought ours. Jim C
                    ----- Original Message -----
                    From: <PeugeotLew@...>
                    To: <classicrv@egroups.com>
                    Sent: Wednesday, October 04, 2000 4:52 AM
                    Subject: Re: [classicrv] Re: 69 Dodge Travco 2700


                    > Hi,
                    > I was able to find a new master cylinder from a brake specialist in
                    > california for $78.00 which in my eyes was a bargain! This fellows shop is
                    > listed in the Dodge-Travco group here on E-Groups. I went to NAPA first
                    and
                    > they could not find the M-375 chassis in their books,gave me a long story
                    and
                    > left. As a mechanic I knew the right part was out there so on the web I
                    > went.... It is in and working but now blew a wheel cylinder the day we
                    went
                    > to drive her home. I had to send it out to a shop where I bought the
                    travie
                    > to have it repaired. An 8' bar was bent by us trying to break the lug nut
                    > loose so..we figured air tools were needed. We live 130 miles from where
                    our
                    > baby is and became tired of driving back and forth . With luck it will be
                    > ready for pick up soon..... The fun just never ends!
                    > Lew '69 Dodge Travco 2700
                    >
                    > To unsubscribe from this group, send an email to:
                    > classicrv-unsubscribe@egroups.com
                    >
                    >
                  • Duane schwarm
                    Jim - do you have the name of the outfit in Morgan Hill, CA. If you do I will post it to the Database section on the left sidebar. For you newbies to the
                    Message 9 of 23 , Oct 4, 2000
                      Jim - do you have the name of the outfit in Morgan Hill, CA. If you
                      do I will post it to the "Database" section on the left sidebar. For
                      you newbies to the group - there is all kinds of info regarding
                      parts, manuals etc. on the left sidebar under "Database" that you
                      will find in 2 sections - "Salvage Yards" and "Complete Phone Book">
                      It contains name, phone #'s, addresses etc. Also on the sidebar
                      there is "Links" listed that have links to url's of various web
                      sites, some containing info on parts etc. For instance "RVNET" has
                      info on obsolete parts and manuals.

                      moderator
                      Duane Schwarm




                      --- In classicrv@egroups.com, "Jim Clay" <casacaos@a...> wrote:
                      > Hi Lew,
                      > Glad you found the master cyl.I posted a number of an outfit
                      in Iowa
                      > that claims to have parts for the old Dodges.Look back a week or
                      so.RVS in
                      > Morgan Hill,Calif.(1-800-821-2266)usually has parts for the 440 m/i
                      (a lot
                      > interchange)They are the factory service center for the FMC built
                      from'73 to
                      > '76.We have a '74 that works great.
                      > Think I'd consider changing the wheel studs when you get her home.I
                      found
                      > some of the holes egged out when we bought ours. Jim C
                      > ----- Original Message -----
                      > From: <PeugeotLew@a...>
                      > To: <classicrv@egroups.com>
                      > Sent: Wednesday, October 04, 2000 4:52 AM
                      > Subject: Re: [classicrv] Re: 69 Dodge Travco 2700
                      >
                      >
                      > > Hi,
                      > > I was able to find a new master cylinder from a brake
                      specialist in
                      > > california for $78.00 which in my eyes was a bargain! This
                      fellows shop is
                      > > listed in the Dodge-Travco group here on E-Groups. I went to NAPA
                      first
                      > and
                      > > they could not find the M-375 chassis in their books,gave me a
                      long story
                      > and
                      > > left. As a mechanic I knew the right part was out there so on the
                      web I
                      > > went.... It is in and working but now blew a wheel cylinder the
                      day we
                      > went
                      > > to drive her home. I had to send it out to a shop where I bought
                      the
                      > travie
                      > > to have it repaired. An 8' bar was bent by us trying to break the
                      lug nut
                      > > loose so..we figured air tools were needed. We live 130 miles
                      from where
                      > our
                      > > baby is and became tired of driving back and forth . With luck it
                      will be
                      > > ready for pick up soon..... The fun just never ends!
                      > > Lew '69 Dodge Travco 2700
                      > >
                      > > To unsubscribe from this group, send an email to:
                      > > classicrv-unsubscribe@egroups.com
                      > >
                      > >
                    • Richard Reid
                      Duane: The place in Morgan Hill,Ca. is RVS inc the phone number is 800-821-2266 this place bought out FMC motorhomes. they have a lot of dodge chassis
                      Message 10 of 23 , Oct 4, 2000
                        Duane: The place in Morgan Hill,Ca. is RVS inc the phone number is
                        800-821-2266 this place bought out FMC motorhomes. they have a lot of dodge
                        chassis information and parts. Hopes this helps . Dick
                        ----- Original Message -----
                        From: "Duane schwarm" <deschwar@...>
                        To: <classicrv@egroups.com>
                        Sent: Wednesday, October 04, 2000 10:37 AM
                        Subject: [classicrv] Re: 69 Dodge Travco 2700


                        > Jim - do you have the name of the outfit in Morgan Hill, CA. If you
                        > do I will post it to the "Database" section on the left sidebar. For
                        > you newbies to the group - there is all kinds of info regarding
                        > parts, manuals etc. on the left sidebar under "Database" that you
                        > will find in 2 sections - "Salvage Yards" and "Complete Phone Book">
                        > It contains name, phone #'s, addresses etc. Also on the sidebar
                        > there is "Links" listed that have links to url's of various web
                        > sites, some containing info on parts etc. For instance "RVNET" has
                        > info on obsolete parts and manuals.
                        >
                        > moderator
                        > Duane Schwarm
                        >
                        >
                        >
                        >
                        > --- In classicrv@egroups.com, "Jim Clay" <casacaos@a...> wrote:
                        > > Hi Lew,
                        > > Glad you found the master cyl.I posted a number of an outfit
                        > in Iowa
                        > > that claims to have parts for the old Dodges.Look back a week or
                        > so.RVS in
                        > > Morgan Hill,Calif.(1-800-821-2266)usually has parts for the 440 m/i
                        > (a lot
                        > > interchange)They are the factory service center for the FMC built
                        > from'73 to
                        > > '76.We have a '74 that works great.
                        > > Think I'd consider changing the wheel studs when you get her home.I
                        > found
                        > > some of the holes egged out when we bought ours. Jim C
                        > > ----- Original Message -----
                        > > From: <PeugeotLew@a...>
                        > > To: <classicrv@egroups.com>
                        > > Sent: Wednesday, October 04, 2000 4:52 AM
                        > > Subject: Re: [classicrv] Re: 69 Dodge Travco 2700
                        > >
                        > >
                        > > > Hi,
                        > > > I was able to find a new master cylinder from a brake
                        > specialist in
                        > > > california for $78.00 which in my eyes was a bargain! This
                        > fellows shop is
                        > > > listed in the Dodge-Travco group here on E-Groups. I went to NAPA
                        > first
                        > > and
                        > > > they could not find the M-375 chassis in their books,gave me a
                        > long story
                        > > and
                        > > > left. As a mechanic I knew the right part was out there so on the
                        > web I
                        > > > went.... It is in and working but now blew a wheel cylinder the
                        > day we
                        > > went
                        > > > to drive her home. I had to send it out to a shop where I bought
                        > the
                        > > travie
                        > > > to have it repaired. An 8' bar was bent by us trying to break the
                        > lug nut
                        > > > loose so..we figured air tools were needed. We live 130 miles
                        > from where
                        > > our
                        > > > baby is and became tired of driving back and forth . With luck it
                        > will be
                        > > > ready for pick up soon..... The fun just never ends!
                        > > > Lew '69 Dodge Travco 2700
                        > > >
                        > > > To unsubscribe from this group, send an email to:
                        > > > classicrv-unsubscribe@egroups.com
                        > > >
                        > > >
                        >
                        >
                        > To unsubscribe from this group, send an email to:
                        > classicrv-unsubscribe@egroups.com
                        >
                        >
                      • Jim Pipkin
                        ... in ... shop is ... first and ... story and ... That is a good price. I doubt you could have done better at NAPA. Napa discontinued listing parts by the
                        Message 11 of 23 , Oct 4, 2000
                          On Wed, 4 Oct 2000 04:52:38 EDT, you wrote:

                          >Hi,
                          > I was able to find a new master cylinder from a brake specialist
                          in
                          >california for $78.00 which in my eyes was a bargain! This fellows
                          shop is
                          >listed in the Dodge-Travco group here on E-Groups. I went to NAPA
                          first and
                          >they could not find the M-375 chassis in their books,gave me a long
                          story and
                          >left.

                          That is a good price. I doubt you could have done better at
                          NAPA. Napa discontinued listing parts by the M-375 chassis a couple
                          years ago but still carry many for it. You just need the original
                          part number. Some times you can find it on the item most times not.
                          Most Dodge dealers parts department no longer have the parts book for
                          that chassis. By the way, Dodge still have some parts if you know
                          the part number.

                          > As a mechanic I knew the right part was out there so on the web I
                          >went.... It is in and working but now blew a wheel cylinder the day
                          we went
                          >to drive her home. I had to send it out to a shop where I bought the
                          travie
                          >to have it repaired. An 8' bar was bent by us trying to break the
                          lug nut
                          >loose so..we figured air tools were needed.

                          I know the feeling well. The first time I tried to remove the lug
                          nuts on mine I broke a 6' bar. The right hand side was not much of a
                          problem. Working on the front left I broke the bar. Went to get a
                          bigger bar and while walking by the front of the rig the 3" letters
                          which spell DODGE flashed in the corner of my vision. That's when
                          the light came on and I remembered the formula. OD + LS = LHTD

                          ( OLD DODGE + LEFT HAND SIDE = LEFT HAND THREADS ON WHEEL STUDS
                          DUMMY).

                          I have learned a lot of new four letter words working on this old
                          jewel.

                          > We live 130 miles from where our
                          >baby is and became tired of driving back and forth . With luck it
                          will be
                          >ready for pick up soon..... The fun just never ends!
                          > Lew '69 Dodge Travco 2700


                          Regards

                          Jim
                        • Jim Clay
                          Duane,The outfit in Morgan Hill, Ca.is RVS Corp.It is operated by Jim Black and his family.I m sure they do things other than FMC. If you call Jim(he answers
                          Message 12 of 23 , Oct 4, 2000
                            Duane,The outfit in Morgan Hill, Ca.is RVS Corp.It is operated by Jim Black
                            and his family.I'm sure they do things other than FMC.
                            If you call Jim(he answers the phone personally,as often as not)and he has
                            time,he will give you a rundown on how FMC didn't want orphans running
                            around the country with
                            their name on them.They set up RVS,with him in charge,to support the
                            thousand or so coaches they had built.They are still doing upgrades after
                            nearly thirty years.I have complaints with ours(a'74)but,in general,I know
                            of no other rv that approaches it in quality or features,except the large
                            busses of the last few years.
                            I've never had a problem with parts,other than a backorder once or twice.
                            Regards,
                            Jim C
                            ----- Original Message -----
                            From: Duane schwarm <deschwar@...>
                            To: <classicrv@egroups.com>
                            Sent: Wednesday, October 04, 2000 11:37 AM
                            Subject: [classicrv] Re: 69 Dodge Travco 2700


                            > Jim - do you have the name of the outfit in Morgan Hill, CA. If you
                            > do I will post it to the "Database" section on the left sidebar. For
                            > you newbies to the group - there is all kinds of info regarding
                            > parts, manuals etc. on the left sidebar under "Database" that you
                            > will find in 2 sections - "Salvage Yards" and "Complete Phone Book">
                            > It contains name, phone #'s, addresses etc. Also on the sidebar
                            > there is "Links" listed that have links to url's of various web
                            > sites, some containing info on parts etc. For instance "RVNET" has
                            > info on obsolete parts and manuals.
                            >
                            > moderator
                            > Duane Schwarm
                            >
                            >
                            >
                            >
                            > --- In classicrv@egroups.com, "Jim Clay" <casacaos@a...> wrote:
                            > > Hi Lew,
                            > > Glad you found the master cyl.I posted a number of an outfit
                            > in Iowa
                            > > that claims to have parts for the old Dodges.Look back a week or
                            > so.RVS in
                            > > Morgan Hill,Calif.(1-800-821-2266)usually has parts for the 440 m/i
                            > (a lot
                            > > interchange)They are the factory service center for the FMC built
                            > from'73 to
                            > > '76.We have a '74 that works great.
                            > > Think I'd consider changing the wheel studs when you get her home.I
                            > found
                            > > some of the holes egged out when we bought ours. Jim C
                            > > ----- Original Message -----
                            > > From: <PeugeotLew@a...>
                            > > To: <classicrv@egroups.com>
                            > > Sent: Wednesday, October 04, 2000 4:52 AM
                            > > Subject: Re: [classicrv] Re: 69 Dodge Travco 2700
                            > >
                            > >
                            > > > Hi,
                            > > > I was able to find a new master cylinder from a brake
                            > specialist in
                            > > > california for $78.00 which in my eyes was a bargain! This
                            > fellows shop is
                            > > > listed in the Dodge-Travco group here on E-Groups. I went to NAPA
                            > first
                            > > and
                            > > > they could not find the M-375 chassis in their books,gave me a
                            > long story
                            > > and
                            > > > left. As a mechanic I knew the right part was out there so on the
                            > web I
                            > > > went.... It is in and working but now blew a wheel cylinder the
                            > day we
                            > > went
                            > > > to drive her home. I had to send it out to a shop where I bought
                            > the
                            > > travie
                            > > > to have it repaired. An 8' bar was bent by us trying to break the
                            > lug nut
                            > > > loose so..we figured air tools were needed. We live 130 miles
                            > from where
                            > > our
                            > > > baby is and became tired of driving back and forth . With luck it
                            > will be
                            > > > ready for pick up soon..... The fun just never ends!
                            > > > Lew '69 Dodge Travco 2700
                            > > >
                            > > > To unsubscribe from this group, send an email to:
                            > > > classicrv-unsubscribe@egroups.com
                            > > >
                            > > >
                            >
                            >
                            > To unsubscribe from this group, send an email to:
                            > classicrv-unsubscribe@egroups.com
                            >
                            >
                          • PeugeotLew@aol.com
                            You can bet that I am going to go right thru the brakes and wheels. I want to get the original wheels off of her as it still has some split rims on it.... the
                            Message 13 of 23 , Oct 5, 2000
                              You can bet that I am going to go right thru the brakes and wheels. I want to
                              get the original wheels off of her as it still has some split rims on it....
                              the saga will continue :)
                              Lew 1969 Dodge Travco 2700
                            • Don (Michigan)
                              There is a web site called junkyarddog.com that is a search engine for salvage yards. http://www.junkyarddog.com/ If you go to page two and select Find a
                              Message 14 of 23 , Oct 7, 2000
                                There is a web site called "junkyarddog.com" that is a search engine
                                for salvage yards.

                                http://www.junkyarddog.com/

                                If you go to page two and select "Find a Yard" and then select the
                                catagory "RV" and then "Search Listings" it will return info on 21
                                salvage yards around the country. Some listing have a link to a web
                                site, some an email address and some just a local phone number.

                                Three of the yards, Cooper RV Salvage, Graber Industries and Midwest
                                Salvage are located in an area that is heavly populated with
                                manufacturers of mobile homes, travel trailers, motor homes and
                                conversion vans.

                                Don
                              • Jim Clay
                                Don,This is great info.I like to snoop in junkyards,even if I m not looking for anything. Jim C ... From: Don (Michigan) To:
                                Message 15 of 23 , Oct 8, 2000
                                  Don,This is great info.I like to snoop in junkyards,even if I'm not looking
                                  for anything. Jim C
                                  ----- Original Message -----
                                  From: Don (Michigan) <dash7@...>
                                  To: <classicrv@egroups.com>
                                  Sent: Saturday, October 07, 2000 10:44 PM
                                  Subject: [classicrv] Salvage Yards


                                  > There is a web site called "junkyarddog.com" that is a search engine
                                  > for salvage yards.
                                  >
                                  > http://www.junkyarddog.com/
                                  >
                                  > If you go to page two and select "Find a Yard" and then select the
                                  > catagory "RV" and then "Search Listings" it will return info on 21
                                  > salvage yards around the country. Some listing have a link to a web
                                  > site, some an email address and some just a local phone number.
                                  >
                                  > Three of the yards, Cooper RV Salvage, Graber Industries and Midwest
                                  > Salvage are located in an area that is heavly populated with
                                  > manufacturers of mobile homes, travel trailers, motor homes and
                                  > conversion vans.
                                  >
                                  > Don
                                  >
                                  >
                                  >
                                  >
                                  >
                                  > To unsubscribe from this group, send an email to:
                                  > classicrv-unsubscribe@egroups.com
                                  >
                                  >
                                • Duane schwarm
                                  Thanks a million Don. I will add this to our Links category. Duane ... engine ... web ... Midwest
                                  Message 16 of 23 , Oct 8, 2000
                                    Thanks a million Don. I will add this to our "Links" category.

                                    Duane


                                    --- In classicrv@egroups.com, "Don (Michigan)" <dash7@m...> wrote:
                                    > There is a web site called "junkyarddog.com" that is a search
                                    engine
                                    > for salvage yards.
                                    >
                                    > http://www.junkyarddog.com/
                                    >
                                    > If you go to page two and select "Find a Yard" and then select the
                                    > catagory "RV" and then "Search Listings" it will return info on 21
                                    > salvage yards around the country. Some listing have a link to a
                                    web
                                    > site, some an email address and some just a local phone number.
                                    >
                                    > Three of the yards, Cooper RV Salvage, Graber Industries and
                                    Midwest
                                    > Salvage are located in an area that is heavly populated with
                                    > manufacturers of mobile homes, travel trailers, motor homes and
                                    > conversion vans.
                                    >
                                    > Don
                                  Your message has been successfully submitted and would be delivered to recipients shortly.