Loading ...
Sorry, an error occurred while loading the content.

38834Re: [classicrv] RE: Painting fiberglass?

Expand Messages
  • JerryK
    Sep 2, 2013
    • 0 Attachment
      What would be wrong with painting it with a coat of fiberglass resin, sanding that a little and then painting it white or whatever color you want.

      From: Wesley Furr <wesley@...>
      To: classicrv@yahoogroups.com
      Sent: Monday, September 2, 2013 9:18 AM
      Subject: RE: [classicrv] RE: Painting fiberglass?

      Is it deteriorated all the way through, or just loose strands? If not all
      the way through, try running some sandpaper across it and see if it knocks
      off the loose ends and smoothes it out...if yes, tape off the aluminum and
      spray paint it to seal it back up again...

      Otherwise, you'll probably need to figure out a way to replace it...is it
      riveted together? Might just have to drill them out to get it replaced...


      -----Original Message-----

      Would like to repair/replace the fiberglass front window cover in my 1976
      Terry trailer. The outer side is very deteriorated, with the glass strands
      sticking out 3/4". Thought of just replacing the fiberglass panel, but
      it it is sandwiched between two aluminum frames pressed together with no way
      to separate them. Any ideas?

      [Non-text portions of this message have been removed]
    • Show all 21 messages in this topic