--- In email@example.com
, "t_eilers" <tneilers@...>
>grizzly industrial sells a good set for strip building grizzly.com is
the address. the set will cost about $45
> --- In firstname.lastname@example.org, "tropicalflavers"
> <dtropicalflavor@> wrote:
> > all the sets i see say thay have a 1/8 radius
> > bead and flute but the strips are 1/4 inch
> > is this right ?
> The radius is from the center point to the edge, 1/8 radius would
> 1/4 inch diameter, which should work with the your strip thickness.
> Good luck,