Loading ...
Sorry, an error occurred while loading the content.

Re: [casting] Supplies

Expand Messages
  • doc
    The lowest tech/cost is to get some 100% silicone caulking (no anti mold) from your hardware store and add 3 or 4 drops of glycerine per oz of silcone. When
    Message 1 of 4 , Mar 1, 2010
    • 0 Attachment
      The lowest tech/cost is to get some 100% silicone
      caulking (no anti mold) from your
      hardware store and add 3 or 4 drops of glycerine per oz of silcone.

      When you get your grove, look into Alumilite and Smooth On.

      And if you live in a reasonable size city there will likely be a retail
      store dedicated to mold making/casting.

      DOC

      Something about robots...
      http://www.robot-one.com


      At 05:23 AM 24/02/2010, you wrote:
      >
      >
      >Hello casters
      >where/who is the best place to get mold making/
      >casting products; for a low tech beginner (no vac or machines ).....Jeff
      >
      >
    • ramillerf1
      Watch the videos at http://www.tapplastics.com/info/video.php They are very helpful. Russ Miller
      Message 2 of 4 , Mar 2, 2010
      • 0 Attachment
        Watch the videos at http://www.tapplastics.com/info/video.php They are very helpful.
        Russ Miller

        --- In casting@yahoogroups.com, "FFEJ" <wallacejj@...> wrote:
        >
        > Hello casters
        > where/who is the best place to get mold making/ casting products; for a low tech beginner (no vac or machines ).....Jeff
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.