I'm interested Gary. I bent mine last month and had it straightened but has a dent now. I'll ask around and see if I can get my sister to pick it up in a fewpierced8760
Now that I have replaced my mast and boom from my demasting experience a year and a half ago, I have an extra, 23 year old boom laying in my garage which Igarnancy@att.net
The 3 inch diameter heat exchanger on my M2-12 takes a 1/4x2 inch pencil zinc. Unfortunately for me, the smallest zinc at my local West Marine is 1/4 x firstname.lastname@example.org
If you are interested in the Capri 26 sailboat, you will find additional information on the association's web site at capri26.org.
If you own a Capri 26 and are interested in membership, please send an email to email@example.com requesting a membership form.
Capri 26 Specifications
Draft Fin: 4'10"
Draft Wing: 3'5"
Ballast Wing: 1759lbs
Ballast Fin: 1900lbs
Displacement Fin: 5250lbs
Displacement Wing: 5100lbs
Sail Area: 295 sq. ft.
- Dec 17, 2006
- This is a restricted group.
- Attachments are permitted.
- Members cannot hide email address.
- Listed in Yahoo Groups directory.
- Membership requires approval.
- Messages are not moderated.
- All members can post messages.