Loading ...
Sorry, an error occurred while loading the content.
 

Re: Wheel removal

Expand Messages
  • galljj35
    Thanks for the pointers, Graham. I suspect this is some variant of a british thread size. It is a 3/8th s bolt, does anyone know the thread type ? thanks in
    Message 1 of 11 , Jul 31, 2010
      Thanks for the pointers, Graham.

      I suspect this is some variant of a british thread size. It is a 3/8th's bolt, does anyone know the thread type ?

      thanks in advance

      john



      --- In campernicholson@yahoogroups.com, Graham Norbury <gnorbury@...> wrote:
      >
      > Either find the correct size die to chase the threads, or use a
      > thread-file and carefully dress them by hand.
      >
      > Graham
      >
      > On 7/27/2010 5:54 PM, John Gall wrote:
      > > Thanks all. The gear pulled worked like a charm. Unfortunately, I
      > > forgot the admonition about the coin and now I have some bent threads
      > > to deal with
      > >
      > > does it ever end ?
      > >
      > > Never mind , I know !
      > >
      > > Thanks again
      > >
      > > j
      > >
    • John Gall
      I figured it out 3/8 - 16 tap did the trick John
      Message 2 of 11 , Aug 1, 2010
        I figured it out 3/8 - 16 tap did the trick

        John

        On Saturday, July 31, 2010, galljj35 <gall.john.j@...> wrote:
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        > Thanks for the pointers, Graham.
        >
        > I suspect this is some variant of a british thread size. It is a 3/8th's bolt, does anyone know the thread type ?
        >
        > thanks in advance
        >
        > john
        >
        > --- In campernicholson@yahoogroups.com, Graham Norbury <gnorbury@...> wrote:
        >>
        >> Either find the correct size die to chase the threads, or use a
        >> thread-file and carefully dress them by hand.
        >>
        >> Graham
        >>
        >> On 7/27/2010 5:54 PM, John Gall wrote:
        >> > Thanks all. The gear pulled worked like a charm. Unfortunately, I
        >> > forgot the admonition about the coin and now I have some bent threads
        >> > to deal with
        >> >
        >> > does it ever end ?
        >> >
        >> > Never mind , I know !
        >> >
        >> > Thanks again
        >> >
        >> > j
        >> >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.