Loading ...
Sorry, an error occurred while loading the content.


Expand Messages
  • Don
    Apr 20, 2013
      Hi Graham,

      Air vent not blocked so I will be taking the gearbox out.


      --- In campernicholson@yahoogroups.com, Graham Norbury <gnorbury@...> wrote:
      > An easy test to see if the vent is working is to run the transmission
      > with the valve and tube in the #7 hole open. Lead the tube upwards and
      > see if the oil gets pushed up the tube. At any rate, it should stop
      > leaking past the seals once the case is open to the atmosphere. If
      > leaks continue, it pretty much confirms a bad seal and/or shaft
      > Graham.
    • Show all 10 messages in this topic