Loading ...
Sorry, an error occurred while loading the content.
 

Starting a boat?

Expand Messages
  • freedem@excite.com
    Good Golly how did october get here? are there any other still planning to start a boat for use this year and how many are going to build one over the winter
    Message 1 of 8 , Oct 1, 2000
      Good Golly how did october get here? are there any other still
      planning to start a boat for use this year and how many are going to
      build one over the winter for a spring launch?
      happy October
      jeffe
    • Michael Surface
      I am still working on finishing the mast, rudder, and leeboard for my Brick. I have the leeboard done and all the rudder parts cutout and glued. I am modifing
      Message 2 of 8 , Oct 1, 2000
        I am still working on finishing the mast, rudder, and leeboard for my Brick.
        I have the leeboard done and all the rudder parts cutout and glued. I am
        modifing the rudder so it is a kickup and this of course has caused it to
        take longer to build. I got the mast fully shaped but still have to varnish
        it. I only get about 4 to 6 hours a week to work on the boat, but still
        hope to go for a sail if the fall stays warm. Otherwise I will work on
        giving the Brick a better finsh over the winter.

        Michael Surface


        >From: freedem@...
        >Reply-To: bolger@egroups.com
        >To: bolger@egroups.com
        >Subject: [bolger] Starting a boat?
        >Date: Sun, 01 Oct 2000 18:02:29 -0000
        >
        >Good Golly how did october get here? are there any other still
        >planning to start a boat for use this year and how many are going to
        >build one over the winter for a spring launch?
        >happy October
        >jeffe
        >

        _________________________________________________________________________
        Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

        Share information about yourself, create your own public profile at
        http://profiles.msn.com
      • Cyber Rebel
        I m new to the list, but had to speak up on this one. I started my Light Schooner today by building the mainsail & foresail booms. I m going tomorrow to find
        Message 3 of 8 , Oct 1, 2000
          I'm new to the list, but had to speak up on this one. I started my Light
          Schooner today by building the mainsail & foresail booms. I'm going tomorrow
          to find decent lumber for the masts & gaffs. I'm not quite sure yet whether
          to start on the hull or wait for Spring, since I have no indoor area in
          which to work. The cold doesn't bother me, but epoxy prefers warmer weather.
          I'm aiming to have the boat complete, minus sails, by the end of next
          spring. In order to afford the Sailrite kit, I'll need to finish restoring
          an old Pontiac I have and sell it. I should be motoring around on the
          Chesapeake by early summer if all goes well... but I may not have sails by
          then.

          Steve Lane
          Baltimore, Maryland
          ____________________________________________________________________________
          __
          Human beings can always be counted upon to assert, with vigor, their
          God-given right to be stupid.
          -Dean Koontz
          ----- Original Message -----
          From: Michael Surface <msurface@...>
          To: <bolger@egroups.com>
          Sent: Sunday, October 01, 2000 6:21 PM
          Subject: Re: [bolger] Starting a boat?


          > I am still working on finishing the mast, rudder, and leeboard for my
          Brick.
          > I have the leeboard done and all the rudder parts cutout and glued. I am
          > modifing the rudder so it is a kickup and this of course has caused it to
          > take longer to build. I got the mast fully shaped but still have to
          varnish
          > it. I only get about 4 to 6 hours a week to work on the boat, but still
          > hope to go for a sail if the fall stays warm. Otherwise I will work on
          > giving the Brick a better finsh over the winter.
          >
          > Michael Surface
          >
          >
          > >From: freedem@...
          > >Reply-To: bolger@egroups.com
          > >To: bolger@egroups.com
          > >Subject: [bolger] Starting a boat?
          > >Date: Sun, 01 Oct 2000 18:02:29 -0000
          > >
          > >Good Golly how did october get here? are there any other still
          > >planning to start a boat for use this year and how many are going to
          > >build one over the winter for a spring launch?
          > >happy October
          > >jeffe
          > >
          >
          > _________________________________________________________________________
          > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
          >
          > Share information about yourself, create your own public profile at
          > http://profiles.msn.com
          >
          >
          >
          > Bolger rules!!!
          > - no cursing
          > - stay on topic
          > - use punctuation
          > - add your comments at the TOP and SIGN your posts
          > - add some content: send "thanks!" and "ditto!" posts off-list.
          >
          >
        • David Ryan
          Steve -- Having just launched a light scooner, (much of which was built indoors,) I feel qualified to speak ;-) I assembled the bulkheads and topsides indoors.
          Message 4 of 8 , Oct 2, 2000
            Steve --

            Having just launched a light scooner, (much of which was built
            indoors,) I feel qualified to speak ;-)

            I assembled the bulkheads and topsides indoors. Had I been more
            ambitious, I also could have done the spars and foils. Unless your
            house is sealed up like a bottle, epoxy is safer to work with than
            many common household cleaning products. The hull goes together quite
            quickly. If you do all of the above, you won't have that much work to
            do once you move outdoors. There are also epoxies that will cure in
            low temps. I think WestSystem fast works down to about 35-40F. Be
            sure to get Tim's primer. It's full of misguide aussie ideas, but in
            the end it'll save you a lot of grief ;-)

            If you're hurting for cash, skip the sailrite kit. I got my sails out
            of a big drifter (main and jib) and smaller jib (foresail) off a 30
            sloop. I've got another jib I could cut into the staysail, but it's
            in such fine shape, I'm going to try to come up with a better use for
            it. Scrounge up some old sails, cut 'em to shape, glue/tape/sew the
            edges, bent 'em on and go sailing!

            Between lawnsailing and one day on the water, I can safely say you
            will be the *hero* of your neighborhood/landing/marina or anywhere
            else you go with this boat. She also sails handsomely, healing
            slightly with each puff, then surging ahead.



            >I'm new to the list, but had to speak up on this one. I started my Light
            >Schooner today by building the mainsail & foresail booms. I'm going tomorrow
            >to find decent lumber for the masts & gaffs. I'm not quite sure yet whether
            >to start on the hull or wait for Spring, since I have no indoor area in
            >which to work. The cold doesn't bother me, but epoxy prefers warmer weather.
            >I'm aiming to have the boat complete, minus sails, by the end of next
            >spring. In order to afford the Sailrite kit, I'll need to finish restoring
            >an old Pontiac I have and sell it. I should be motoring around on the
            >Chesapeake by early summer if all goes well... but I may not have sails by
            >then.
            >
            >Steve Lane
            >Baltimore, Maryland
            >____________________________________________________________________________
            >__
            >Human beings can always be counted upon to assert, with vigor, their
            >God-given right to be stupid.
            > -Dean Koontz
            >----- Original Message -----
            >From: Michael Surface <msurface@...>
            >To: <bolger@egroups.com>
            >Sent: Sunday, October 01, 2000 6:21 PM
            >Subject: Re: [bolger] Starting a boat?
            >
            >
            >> I am still working on finishing the mast, rudder, and leeboard for my
            >Brick.
            >> I have the leeboard done and all the rudder parts cutout and glued. I am
            >> modifing the rudder so it is a kickup and this of course has caused it to
            >> take longer to build. I got the mast fully shaped but still have to
            >varnish
            >> it. I only get about 4 to 6 hours a week to work on the boat, but still
            >> hope to go for a sail if the fall stays warm. Otherwise I will work on
            >> giving the Brick a better finsh over the winter.
            >>
            >> Michael Surface
            >>
            >>
            >> >From: freedem@...
            >> >Reply-To: bolger@egroups.com
            >> >To: bolger@egroups.com
            >> >Subject: [bolger] Starting a boat?
            >> >Date: Sun, 01 Oct 2000 18:02:29 -0000
            >> >
            >> >Good Golly how did october get here? are there any other still
            >> >planning to start a boat for use this year and how many are going to
            >> >build one over the winter for a spring launch?
            >> >happy October
            >> >jeffe
            >> >
            >>
            >> _________________________________________________________________________
            >> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
            >>
            >> Share information about yourself, create your own public profile at
            >> http://profiles.msn.com
            >>
            >>
            >>
            >> Bolger rules!!!
            >> - no cursing
            >> - stay on topic
            >> - use punctuation
            >> - add your comments at the TOP and SIGN your posts
            >> - add some content: send "thanks!" and "ditto!" posts off-list.
            >>
            >>
            >
            >
            >
            >Bolger rules!!!
            >- no cursing
            >- stay on topic
            >- use punctuation
            >- add your comments at the TOP and SIGN your posts
            >- add some content: send "thanks!" and "ditto!" posts off-list.


            CRUMBLING EMPIRE PRODUCTIONS
            134 W.26th St. 12th Floor
            New York, NY 10001
            (212) 243-1636
          • Bink
            The weather was, once again, too perfect for the building of boats this last weekend. Sat. was spent jousting with tankers in the Carquinez Straits and Sun.
            Message 5 of 8 , Oct 2, 2000
              The weather was, once again, too perfect for the building of boats
              this last weekend. Sat. was spent jousting with tankers in the
              Carquinez Straits and Sun. exploring the Petaluma River with the
              trusty CSD Pirogue. Not many weekends I can steal a sail on BOTH
              days! The cartopper is still a pile of flat pieces in the garage.
              I'm using Payson's idea of attaching legs to frames B and C to raise
              the boat up to working heights. Thanks to the other posters for the
              info on the inwales/outwales. I was very confused after reading
              Dynamite's WoodenBoat article. I've never had problems with just
              using outwales...even on my Michalak Sport Dory that has two very
              thick layers that are double-beveled.

              Bink.

              I'll save the rainy Winter days to build boats.

              --- In bolger@egroups.com, freedem@e... wrote:
              > Good Golly how did october get here? are there any other still
              > planning to start a boat for use this year and how many are going
              to
              > build one over the winter for a spring launch?
              > happy October
              > jeffe
            • Rich Deming
              I m still building the Nymph. I did make progress on her this past weekend by sheathing the outside with glass/epoxy. One step closer! I m determined to learn
              Message 6 of 8 , Oct 3, 2000
                I'm still building the Nymph. I did make progress on her this past
                weekend by sheathing the outside with glass/epoxy. One step closer!
                I'm determined to learn to sail the Nymph before Christmas!
                Being me, I have a 14' flat bottom skiff and a solo canoe in the
                works also. They should keep me busy all winter.
                I'm determined to learn to sail that Nymph before Christmas! Did I
                say that already?

                Keep smiling,
                Rich


                --- In bolger@egroups.com, freedem@e... wrote:
                > Good Golly how did october get here? are there any other still
                > planning to start a boat for use this year and how many are going
                to
                > build one over the winter for a spring launch?
                > happy October
                > jeffe
              • Jake Millar
                ... to ... I just started a Payson Pirogue. Hull s stitched together but have nt started fillets or taping yet (maybe tomorrow). I just want to get the hull
                Message 7 of 8 , Oct 3, 2000
                  --- In bolger@egroups.com, freedem@e... wrote:
                  > Good Golly how did october get here? are there any other still
                  > planning to start a boat for use this year and how many are going
                  to
                  > build one over the winter for a spring launch?
                  > happy October
                  > jeffe

                  I just started a Payson Pirogue. Hull's stitched together but have'nt
                  started fillets or taping yet (maybe tomorrow). I just want to get
                  the hull together then take my time finishing it out. Last winter's
                  project was a Light Dory (love that boat!) The winter before was a
                  Michalak Toto (just sold, hence the Pirogue). Before that I built a
                  Minimum Kayak for my wife and several self designed kayaks for
                  myself, borrowing heavily from the Minimum Kayak- a little longer a
                  little wider etc.. Somewhere in there I built an Elegant Punt for my
                  nephew. Jeez! This is starting to look like a resume! At any rate
                  winter boatbuilding out in the garage has become an annual tradition.
                  Thank god my wife does'nt ever expect to actually put her car in
                  there! Jake
                • Julie E Johnson
                  I just started my two sheet maximum skiff - Summer Breeze - inspired by Bolger s Teal. I m posting building notes and pictures as I go.
                  Message 8 of 8 , Oct 4, 2000
                    I just started my two sheet maximum skiff - Summer Breeze - inspired by
                    Bolger's Teal.
                    I'm posting building notes and pictures as I go.
                    http://members.tripod.com/simplicityboats/summerbreeze.html
                    A guy who lives on San Andres Island off the coast of Columbia saw my
                    half sheet model, and contacted me about building Summer Breeze. I'm
                    using this as motivation to build the full sized boat. Just started
                    yesterday. So far so good.
                    David Beede

                    Jake Millar wrote:
                    >
                    > --- In bolger@egroups.com, freedem@e... wrote:
                    > > Good Golly how did october get here? are there any other still
                    > > planning to start a boat for use this year and how many are going
                    > to
                    > > build one over the winter for a spring launch?
                    > > happy October
                    > > jeffe

                    SOME CLICKS THAT COUNT!!
                    Feed someone.
                    http://www.thehungersite.com/
                    Save a little rain forest.
                    http://rainforest.care2.com/front.html/player12296

                    Simplicity Boats (& mirror sites)
                    http://members.tripod.com/simplicityboats/index.html
                    http://members.xoom.com/simpleboats/index.html
                    Here's my latest boat:
                    http://members.tripod.com/simplicityboats/summerbreeze.html
                    http://members.xoom.com/simpleboats/summerbreeze.html
                    Quasi esoteric musical instruments
                    http://unicornstrings.com
                  Your message has been successfully submitted and would be delivered to recipients shortly.