Loading ...
Sorry, an error occurred while loading the content.

Re: [bolger] Fw: Martha Jane Full Size Paper Plans

Expand Messages
  • phil.bolger
    ...and order a few extra cartridges of ‘consumables’/resin etc. With your due caution about taking things outside, one can sense that you’ve ‘been
    Message 1 of 9 , Jun 24, 2013
    • 0 Attachment
      ...and order a few extra cartridges of ‘consumables’/resin etc.

      With your due caution about taking things outside, one can sense that you’ve ‘been there’ before...
      Sure would not want to have the darn boat come to fill the house with no way to get it out !!

      This is developing into a really useful thread.  Yes Newbies – behold Old Hands at work !! 
      Read tight !
      Take notes !
      And don’t get stuck !
      There will be a pop-quiz...

      Susanne Altenburger, PB&F
        
      Sent: Monday, June 24, 2013 5:13 PM
      Subject: Re: [bolger] Fw: Martha Jane Full Size Paper Plans
       
       

      Sue,perhaps you could do 1:1 plans. Then we could  use our 3 D printers and just build the boat that way. Be sure to warn buyers to "take the machine outside" before pressing the start button! Rocky


      From: philbolger@...
      To: bolger@yahoogroups.com
      Sent: Monday, June 24, 2013 3:57:38 PM
      Subject: Re: [bolger] Fw: Martha Jane Full Size Paper Plans

       

      Well, I had the old Steven Wright joke in my head about him buying a map of... in 1:1 scale...
      So these and all of our plans are to the scale they originally were/are drawn in, usually on 17” x 22”- or 22” x 34”-format paper – just not in 1:1 scale of the boat...
      ”Never mind !”
      Hey it’s hot out here.

      Susanne Altenburger, PB&F
       
       
       
      Sent: Monday, June 24, 2013 10:55 AM
      Subject: [bolger] Fw: Martha Jane Full Size Paper Plans
       
       

      Should have shared this...

      -----Original Message-----
      From: mailto:philbolger%40comcast.net
      Sent: Monday, June 24, 2013 8:40 AM
      To: Constant Behrens
      Subject: Re: Martha Jane Full Size Paper Plans

      Well, there is always 'the source', i.e. Phil Bolger & Friends.
      Plans with respective corrections and upgrades were listed by Phil over 10
      years ago at US $250.- to build one boat, sent rolled in a tube.
      However these would not be 'full-size' plans...
      Typically, an international money order or a bank-draft made out to 'Phil
      Bolger & Friends' will work from Oz.
      Thank you for your interest.

      Susanne Altenburger
      Phil Bolger & Friends
      66 Atlantic Street
      Gloucester, MA 01930-1627
      USA

      -----Original Message-----
      From: Constant Behrens
      Sent: Sunday, June 23, 2013 10:38 PM
      To: mailto:philbolger%40comcast.net
      Subject: Martha Jane Full Size Paper Plans

      Hi Friends,

      I live in Australia and would like to buy the full size paper plans

      of Martha Jane, original and revisited. Also if you know of anyone

      owning or building MJs in OZ, I would appreciate if you invited them

      to get in touch with me to cultivate, build and navigate the MJ Spirit.

      Thanks for your prompt response. Hope you can come one day for

      a sailing visit to Australia. I might be able to sponsor the journey.

      Constant

      Sent from my iPad

    • sirdarnell
      I remember that. He had a map of the US in 1 to 1 scale, i.e. actual size. In the same monologue he said he had a box of powdered water, but didn t know what
      Message 2 of 9 , Jun 25, 2013
      • 0 Attachment
        I remember that. He had a map of the US in 1 to 1 scale, i.e. actual size. In the same monologue he said he had a box of powdered water, but didn't know what to add. :)

        --- In bolger@yahoogroups.com, <philbolger@...> wrote:
        >
        > Well, I had the old Steven Wright joke in my head about him buying a map of... in 1:1 scale...
        > So these and all of our plans are to the scale they originally were/are drawn in, usually on 17” x 22”- or 22” x 34”-format paper â€" just not in 1:1 scale of the boat...
        > ”Never mind !”
        > Hey it’s hot out here.
        >
        > Susanne Altenburger, PB&F
        >
      • sirdarnell
        Actually, NASA has designs for a 3D printer to print moon or mars bases. Uses local soil, provided by something like a robotic front loader, and heat for
        Message 3 of 9 , Jun 25, 2013
        • 0 Attachment
          Actually, NASA has designs for a 3D printer to print moon or mars bases. Uses local soil, provided by something like a robotic front loader, and heat for materials.

          --- In bolger@yahoogroups.com, captainrocky@... wrote:
          >
          > Sue,perhaps you could do 1:1 plans. Then we could  use our 3 D printers and just build the boat that way. Be sure to warn buyers to "take the machine outside" before pressing the start button! Rocky
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.