Loading ...
Sorry, an error occurred while loading the content.

Re: [bolger] winter cover system for Micro

Expand Messages
  • nezih
    Picture Pls ... From: adkgoodboat To: bolger@yahoogroups.com Sent: Tuesday, June 18, 2013 9:15 PM Subject: [bolger] winter cover system for Micro I built a
    Message 1 of 2 , Jun 18, 2013
    • 0 Attachment
      Picture Pls
       
      ----- Original Message -----
      Sent: Tuesday, June 18, 2013 9:15 PM
      Subject: [bolger] winter cover system for Micro

       

      I built a very good Kover Klamp winter covering system for one of my Mircos. This system uses 3/4" electrical conduit, bent as needed, and clamped together with "Kover Klamps" which clamp pieces of conduit at any angle. All frame parts stand on the boat, in wells, on cabin, in cockpit. The fabric is a laminated "Ultra Cover," with zip-open door and two vents, tailored to the framework and boat and tied with the clever "Kover Klips" that attach to the fabric wherever needed and at whatever angle. Cover (white) comes vertically down outside the hull and is high enough that you can get around and even do work inside. Strong, well-supported, sheds snow (mostly). $650 in materials and a day or two of work. Comes apat quickly, all parts color coded and numbered for reassembly. Frame said to last 15 years, cover not so long but much longer than tarp material. Have sold both Micros and would now sell this cover system for $500.

    Your message has been successfully submitted and would be delivered to recipients shortly.