Loading ...
Sorry, an error occurred while loading the content.

Re: [bolger] Micro questions

Expand Messages
  • Bruce Hallman
    On Sun, Apr 18, 2010 at 12:45 AM, rodcahill@y7mail.com ... Parts 23 24 are considered to be keel blocking and stern post(see building notes 23 & 24). Part 14
    Message 1 of 2 , Apr 18, 2010
    • 0 Attachment
      On Sun, Apr 18, 2010 at 12:45 AM, rodcahill@...
      <rodcahill@...> wrote:
      >
      >
      >
      > G'day all,
      > On page 2 of the Micro plans, midddle picture.
      > Q1. Where part 24 is faired into the keel baton towards front of boat, is it bolted to the keel baton or only glued and held in by keel sheathing?
      > Q2. Same picture, where parts 23 and 14 meet, is the small wedge bolted through keel baton or just gluedand held in by keel sheathing ?
      > Thankyou
      >


      Parts 23 24 are considered to be keel blocking and stern post(see
      building notes 23 & 24). Part 14 is the keel batten (see building
      note 14)

      Batten, part 14, is glued, screwed and bolted per note 14.

      Stern post, part 23, passes through the hull bottom and bolts through
      bulkhead "D".

      The blocking, parts 24, if fastened with the keel sheathing (step 26),
      with glue and 1" ringshank nails (or screws) at about 3 inch spacing.
    Your message has been successfully submitted and would be delivered to recipients shortly.