RE: [bolger] Re: Plywood 101
- Both sides? I'm surprised, I've read in many books that wood even plywood
needs air to breathe thus one side only. Older books often refer to "paint
outside oil inside"
From: firstname.lastname@example.org [mailto:email@example.com] On Behalf Of
Sent: Thursday, December 04, 2008 7:14 AM
Subject: Re: [bolger] Re: Plywood 101
Having worked a lot with ACX and boats, I strongly agree it needs
glassing of both sides.
A heavy boat is not all bad, because the increase in durability and
improvement to stability are good things.
One issue with a Teal, like all double ended boats, the 12 foot length
has the same carrying capacity as a 10 foot transom boat, or an 8 foot
On Thu, Dec 4, 2008 at 5:29 AM, Don Ellenbrook <dschurricanes@
<mailto:dschurricanes%40yahoo.com> yahoo.com> wrote:
> This might sound crazy but I have read on some sites about the ACX plywoodweights
> thing & they tell me to glass it all... now we have a 12 footer that
> a ton..I like mussing with boats painting & fixing things... to me its all[Non-text portions of this message have been removed]
> part of having a wood boat...Don
- The only types of plywood that you know for sure have a good core so
they will not be a problem down the road are the marine plys and good
MDO. Anything else you will find WILL have voides of one kind or
another shortning the life of the boat.
--- In firstname.lastname@example.org, "paulthober" <paulthober@...> wrote:
> --- In email@example.com, "Don" <dschurricanes@> wrote:
> > Has anyone used AC 3ply plywood...to build a boat...of Phil's
> I built a Gypsy and a Chebacco using ACX. Worked for me, however, it
> didn't save much moolah. Lots and lots of sorting through the pile
> Home Despot. For the last couple of years I haven't seen panels
> labeled ACX. I also built a Nymph using $10/sheet luau [sic]. No
> problem. I built a Cartopper a couple of years ago using BS1088 ply
> and am going to build a Chebacco, Caledonia, or a Tremolino this
> winter and it will also be built using BS1088 ply.
> Forgive me as this has been beaten to death numerous times in the
> past, but I agree with the faction that advocates using the good
> stuff, particularly if you want a lasting product. The bonus is that
> building is easier with quality materials.